Answer:
(A). The horizontal initial velocity is 25 m/s.
(B). The vertical initial velocity is 43.3 m/s.
(C). The velocity component is
[tex]u_{x}=u\cos\theta[/tex]
[tex]u_{y}=u\sin\theta[/tex]
Explanation:
Given that,
Initial velocity = 50.0 m/s
Angle = 60°
We need to calculate the component of velocity
Using formula of component
(A). Horizontal initial velocity
[tex]\cos\theta=\dfrac{u_{x}}{u}[/tex]
Put the value in to the formula
[tex]\cos60=\dfrac{u_{x}}{50}[/tex]
[tex]u_{x}=50\times\cos60[/tex]
[tex]u_{x}=25\ m/s[/tex]
(B). Vertical initial velocity
[tex]\sin\theta=\dfrac{u_{y}}{u}[/tex]
Put the value in to the formula
[tex]\sin60=\dfrac{u_{y}}{50}[/tex]
[tex]u_{y}=50\times\sin60[/tex]
[tex]u_{y}=43.3\ m/s[/tex]
The velocity component is
[tex]u_{x}=u\cos\theta[/tex]
[tex]u_{y}=u\sin\theta[/tex]
Hence, (A). The horizontal initial velocity is 25 m/s.
(B). The vertical initial velocity is 43.3 m/s.
(C). The velocity component is
[tex]u_{x}=u\cos\theta[/tex]
[tex]u_{y}=u\sin\theta[/tex]
A charge of - 4.0 µC is located at the origin and a charge of - 5.0 µC is located along the y-axis at y = 2.0 m. At what point along the y-axis is the electric field zero?
I got y = 0.94427191 and y = -16.944272. Not sure if right tho.
I did [tex]{k q_1 \over y^2} &= {k q_2 \over (2-y)^2}[/tex], put the known in and solved it.
1. Compare pressure that fluid applies to the bottom of a glass with the pressure it applies to the sides of the glass
how magnets were first developed from pieces of lodestone and the different ideas that people had about them.
Explanation:
the mineral magnetite.They are naturally occurring magnets, which can attract iron. The property of magnetism was first discovered in antiquity through lodestones.Pieces of lodestone, suspended so they could turn, were the first magnetic compasses,
and their importance to early navigation is indicated by the name lodestone, which in Middle English means "course stone" or "leading stone", from the now-obsolete meaning of lode as "journey, way".
Some girls use a curling iron to fix their hair. It is very hot when plugged in for a while. If you want protect your skin, you would need to pick it up on the plastic end. Which property of the plastic is portant for it to be used on a curling iron? a. Soluble in water b. Insulates thermal energy C. Conducts electrical energy d. Emits magnetic energy
Answer:
B. Insulates thermal energy
Answer:
b
Explanation:
if you insulate thermal energy aka heat you are keep the heat in one place in this case the metal, which provent you from burning your self if you hold the plastic part.
pls help
will give the brainliest!
Explanation:
longitudinal wave .
they are composed of rarefaction and compression
there is change of pressure variations through medium
there is change in density throughout the medium
they can be propagated in liquid soild and gasses
example sound wave
transverse wave
they are composed of troughs and Crest
there is no pressure variations throughout the medium
there is no change in density
they can propagated in liquid soild but not gases
example light wave
if a big stone and a small stone is dropped simultaneously from the certain height. they fall together why??
Because it takes more force to accelerate a mass, and gravity exerts more force on a greater mass. So every object winds up with the same acceleration.
And THAT, of course, says that all objects in the same gravity will pick up the same speed in the same time, and fall the same distance in the same time.
He sees a mouse sniffing along at 0.2 m/s but it hears and starts to scurry for safety. In just 4.7 s it speeds up to 1.6 m/s. Find its acceleration.
Answer:
0.30 m/s²
Explanation:
Given:
v₀ = 0.2 m/s
v = 1.6 m/s
t = 4.7 s
Find: a
a = (v − v₀) / t
a = (1.6 m/s − 0.2 m/s) / 4.7 s
a = 0.30 m/s²
Question 28
1 pts
A cube 5.0 cm on a side has a mass of 750 grams. Find the Density. Hint: Volume of a cube
=Length x Width x Height
A.6 g/cm3
B.20 g/cm3
C. 14 g/cm3
D. 8 g/cm3
Answer:
A) 6 [g/cm^3]
Explanation:
The volume of a cube is equal to the product of height by width by length, all these dimensions are equal.
V = L*L*L
where:
L = 5 [cm]
V = (5)^3
V = 125 [cm^3]
Density is defined as the relationship between mass and volume.
density = mass/volume
density = 750/125
density = 6 [g/cm^3]
How many Joules of heat are released from a 400g piece of glass that has been
cooled from 28°C to 6°C? The specific heat for this particular type of glass is 0.664
J/gºC.
Answer:
65c
Explanation:
You burn a 100 kg log. If you add the mass
of the log, soot and gasses given off
while the log was burning they will equal
A.120kg B. 50kg C.100 D. 80
Answer:c.100
Explanation:
How is momentum calculated?
O A. By dividing mass by velocity
B. By subtracting velocity from mass
C. By multiplying mass by velocity
D. By adding mass and velocity
Momentum can be calculated by multiplying the mass of an object by the velocity of an object. Thus, the correct option is C.
What is Momentum?The momentum is a quantity which can be defined as the product of the mass and velocity of an object. It is an example of standard mechanical quantity. Momentum is a vector quantity, this means it possess both a magnitude and a direction. If "m" is an object's mass and "v" is its velocity, then the object's momentum p is:
p = m × v
The examples of momentum is whenever we toss a ball at someone as well as it smacks them square in the face. It indicates how difficult it would have been to stop the ball.
Therefore, the correct option is C.
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ6
Describe an experiment the student could do to measure the specific heat capacity of a metal
Answer:
Steps to determine the specific heat capacity.
1. Place a beaker on a balance and press zero.
2. Now add the oil to the beaker and record the mass of the oil.
3. Read the starting temperature of the oil.
4. Connect a joulemeter to the immersion heater.
5. Time for thirty minutes.
6. Read the number of joules of energy that passed into the immersion heater.
7. Read the final temperature of the oil.
8. Use the following formula to calculate the specific heat capacity.
Explanation:
plz mark as brainliest aswer
Here’s another one :(
2. Floyd Beattie set an unofficial speed record for a Floyd Beattie set an unofficial speed record for a unicycle in 1986. He rode the unicycle through a 200
m speed trap and accelerated at a constant rate along the speed trap, so that his initial speed was 9.78
m/s and his final speed was 10.22 m/s. What would the magnitude of his acceleration have been?
Answer:
0.022m/s²Explanation:
Given
v = 10.22m/s
u = 9.78m/s
S = 200m
Using the equation of motion'
v² = u² + 2aS
v is the final velocity
u is the initial velocity
a is the acceleration
S is the displacement
Substitute the given parameters into the formula:
10.22² = 9.78² + 2a(200)
104.4484 = 95.6484 + 400a
400a = 104.4484 -95.6484
400a = 8.8
a = 8.8/400
a = 0.022m/s²
Hence the magnitude of his acceleration would have been 0.022m/s²
A.they are farther apart
B.they have increased in size
C.they have lost energy
D.they are moving slower
Answer:
c
Explanation:
Electronegativity affects the strength of intermolecular forces. A very electronegative atom will create a stronger negative charge . True or false
Answer:
Electronegative atom will create a stronger negative charge is true.
Explanation:
Given that,
Electronegativity affects the strength of intermolecular forces.
We know that,
Electronegativity :
Electronegativity is a ability of an atom, shared electron to itself.
In periodic table,
When we move left to right in period then the electronegativity increases.
When we move up to down in a group then the electronegativity decreases.
We know that,
The intermolecular forces are dipole-dipole interactions which is the strongest intermolecular force of attraction.
If the electronegativity of atom is more, then the atom gain negative charge.
When the attraction force is more in atoms then the electronegative will be more.
Hence, Electronegative atom will create a stronger negative charge is true.
Without completing the calculations, determine what the new volume will be in the problem below. Also, explain how you were able to determine the new volume without completing the calculations. Pay special attention to how the pressure is changing. An 80.0-mL sample of carbon monoxide gas (CO) is stored at a pressure of x kPa. The pressure is doubled to 2x kPa. What is the new volume?
According to the Boyle's law, as pressure is inversely proportional to volume at constant temperature the the new volume of gas is 40 ml.
What is Boyle's law?Boyle's law is an experimental gas law which describes how the pressure of the gas decreases as the volume increases. It's statement can be stated as, the absolute pressure which is exerted by a given mass of an ideal gas is inversely proportional to its volume provided temperature and amount of gas remains unchanged.
Mathematically, it can be stated as,
P∝1/V or PV=K. The equation states that the product of of pressure and volume is constant for a given mass of gas and the equation holds true as long as temperature is maintained constant.The nature of graph obtained when gas obeys Boyle's law is hyperbolic curve.
Learn more about Boyle's law,here:
https://brainly.com/question/1437490
#SPJ5
To win the game, a place kicker must kick a football from a point 21 m (22.9656 yd) from the goal, and the ball must clear the crossbar, which is 3.05 m high. When kicked, the ball leaves the ground with a speed of 16 m/s at an angle of 55.3◦ from the horizontal. The acceleration of gravity is 9.8 m/s^2 By how much vertical distance does the ball clear the crossbar? Answer in units of m
In projectile horizontal distance is given by :
[tex]h = \dfrac{u^2sin^ 2\theta}{2g}[/tex]
Putting all given values, we get :
[tex]h = \dfrac{u^2sin^ 2\theta}{2g}\\\\h=\dfrac{16^2\times sin^2 \ 55.3^o}{2\times 9.8}\\\\h=13.1\ m[/tex]
Therefore, maximum height of football is 13.1 m.
Hence, this is the required solution.
Explain the free motion of particles.
Answer:
D : An electron may act with either particle-like or wave-like characteristics.
Explanation:
This is the whole basis of the Schrödinger equation.
The other options are correct, but they do not state the dual nature of the electron.
Why do we use scatter plots for most data in Physical Science? Question 1 options: because the teacher said to use scatter plots because scatter plots show 100% of the data like a pie because scatter plots show the relationship between the independent and dependent variables because scatter plots show data for categories that do not overlap
Answer:
scatter plots show the relationship between the independent and dependent variables
Explanation:
A scatter plot is a graph which shows two variables plotted along two axes (usually the x and y axes). Scatter plots are useful in establishing any form of correlation between the dependent and independent variables in any study.
Correlation simply means the degree of relationship between variables, that is, how much does one variable affect the other? When scatter plots are almost a straight line graph, there is a high correlation between the variables. When the points in a scatter plot are isolated, there is little (sometimes zero) correlation between the variables.
a car traveling at a speed of 46 m/s encounters an emergency and comes to a complete stop. how much time will it take for the car to stop if it accelerates at -1m/s/s
Compute for the total mechanical energy of a 3.5 kg baseball dropped from a height of 3 meters moving at a speed of 10 m/s. NEED ASAP GRADE 8 SCIENCE TY IN ADVANCE :))
Mechanical energy = Kinetic Energy + Potential Energy
Kinetic Energy :Kinetic energy = 1/2 * m * v² = 1/2 * 3.5 * (10)²
=> Kinetic energy = 175 J
Potential Energy :Potential energy = m * g * h = 3.5 * 10 * 3 = 105 J
Hence,
Mechanical energy = Kinetic Energy + Potential Energy
= 175 J + 105 J
= 280 J
Taking into account the potencial, kinetic and mechanical energy, the total mechanical energy is 278.005 J.
Potencial energyPotential energy refers to the position that a mass occupies in space and its magnitude is directly proportional to the height at which the object is, with respect to a reference position, to the mass of the object and to gravity:
Ep = m×g×h
Kinetic energyOn the other hand, kinetic energy manifests itself when bodies move and is associated with speed. The kinetic energy of a body depends on its mass and the square of its speed:
Ec = [tex]\frac{1}{2}[/tex]×m×v²
Mechanical energyThe mechanical energy of a body is the capacity it has to carry out mechanical work, that is, to produce a movement due to causes of mechanical origin, such as its position or its speed.
The mechanical energy of a body is the sum of its kinetic energy and its potential energy:
Em = Ep + Ec
Where
Em is the mechanical energy (J).Ep the potential energy (J). Ec the kinetic energy (J).Then:
Em= m×g×h + [tex]\frac{1}{2}[/tex]×m×v²
Principle of conservation of mechanical energyThe Principle of conservation of mechanical energy indicates that, in the absence of friction and without the intervention of any external work, the sum of the kinetic and potential energies remains constant, that is, the mechanical energy of a body remains constant throughout the movement. if no friction force acts.
This caseIn this case, you know that:
m= 3.5 kgg= 9.81 [tex]\frac{m}{s^{2} }[/tex]h= 3 mv= 10 [tex]\frac{m}{s}[/tex]Complying with the Principle of Conservation of Mechanical Energy and replacing in the expression of mechanical energy:
Em= 3.5 kg×9.81 [tex]\frac{m}{s^{2} }[/tex]×3 m + [tex]\frac{1}{2}[/tex]×3.5 kg×(10 [tex]\frac{m}{s}[/tex])²
Solving:
Em=103.005 J + 175 J
Em= 278.005 J
Finally, the total mechanical energy is 278.005 J.
Learn more:
https://brainly.com/question/3736007?referrer=searchResultshttps://brainly.com/question/13824832?referrer=searchResultshttps://brainly.com/question/6536722https://brainly.com/question/10770261
HELP!!!! WILL MARK BRAINLIEST!!
Fill in the names of the neuron parts and their functions. After you've filled in all the answers, click on
the puzzle pieces next to the answer spaces to check your success
Answer:
A) Dendrite
Receives information from other neutrons and transmits information into the soma/cell body.B) Soma
Contains the nucleus of the neutral cell and maintains chemicals that keep the neutron functioning properly, also provides energy for the cell.C) Axon
Transmits signals away from the soma to other neutrons, muscles, or glands.D) Myelin Sheath
Insulated fatty material that surrounds an axon and speeds up signal transmission.E) Synapse
The junction where neutrons connect to transmit electrical or chemical information.Explanation:
EDG 100%
What does an increase in the temperature of air indicate? A) The air has less thermal energy. B) The air has more thermal energy. C) The air particles have slowed down. D) The air particles have sped up.
Answer:
B)The air has more thermal energy
Answer:
its B
Explanation:
THATS THE ANSWER TRUST ME
It takes a force of 50 N to give a body an acceleration of 10 m/s2. What is the mass of the body?
Answer:
The answer is 5 kgExplanation:
The mass of the body can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
We have
[tex]m = \frac{50}{10} \\ [/tex]
We have the final answer as
5 kgHope this helps you
which graph above best illustrates homeostasis
1. What is the new kinetic energy of the 1900kg ship on the right moving at 4 m/s?
2. If the 0.10kg baseball on the right has a kinetic energy of 5 J, what is its velocity?
3. if the mosquito on the right is moving at 10 m/s anx has the the kinetic energy of 0.25 J, what is its mass?
Explanation:
That`s is the answer, just check
2. Which of the following is NOT a possible source of Earth's magnetic field?
A. sun's magnetic field
c. magnetosphere
b. moon's magnetic field
d. Earth's core
Answer:
c.) magnetosphere
Explanation:
I think is C
In a scientific test conducted in Arizona, a special cannon called HARP (High Altitude Research Project) shot a projectile straight up to an alti-tude of 180.0 km. If the projectile's initial speed was 3.00 km/s, how long did it take the projectile to reach its maximum height?
Answer:
It took the projectile 120 s to reach the maximum height.
Explanation:
Given;
maximum height of the projectile, s = 180 km = 180,000 m
initial speed of the projectile, u = 3 km/s = 3000 m/s
final velocity at maximum height, v = 0
Apply the following kinematic equation for average velocity of the projectile;
[tex]s = (\frac{v+u}{2} )t\\\\(v+u)t = 2s\\\\t = \frac{2s}{v+u} \\\\t = \frac{2*180,000}{0+3,000}\\\\ t = 120 \ s[/tex]
Therefore, it took the projectile 120 s to reach the maximum height.
What keeps the sun shining
Answer:
The Sun shines by turning hydrogen into helium in its core.
Explanation:
This process is called nuclear fusion. Fusion happens when lighter elements are forced together to become heavier elements. When this happens, a tremendous amount of energy is created.