20 swings takes 5 seconds in the pendulum. calculate the periodic time of the swing​

Explanation:

the high heels has a more pressure than flat soles bcoz small area has more pressure than large area.

Explanation:

Noise is sound with a continuous structure. Music is composed of sounds with a fundamental frequency and overtones. Noise is composed of sounds with frequencies that range continuously in value from as low as you can hear to as high as you can hear — not necessarily at equal intensity, however.

Speed = Distance/Time

=> Speed = 100m/16s

=> Speed = 6.25m/s

=> Speed = 6.25 ms^-1

Answer:

Explained below.

Explanation:

Let the initial velocity from the top of the tower of height(h) be u'

Now, since it is projected horizontally, the horizontal distance covered will be due to having a uniform horizontal velocity (u) while it will possess a vertical distance in the downward direction due to constant acceleration due to gravity (g).

If the time it takes the ball to reach the ground is "t", then we can say the horizontal distance travelled by the ball is denoted as; x(t) = x, while the vertical distance is denoted by; y(t) = y

Now, since it's a projectile the intial velocity (u) will have vertical and horizontal components which are;

u_y and u_x respectively.

Applying kinematic equations, we have;

x = u_x•t + ½at²

Acceleration is zero in the horizontal x direction. Thus;

x = u_x•t

For the vertical y-direction;

y = u_y•t + ½at²

Here since direction is in that of gravity, then a = g.

Also, since the initial velocity has no downward component, then u_y = 0 m/s

Thus;

y = ½gt²

From x = u_x•t, we have;

t = x/u_x

Thus;

y = ½g(x/u_x)²

y = ½gx²/(u_x)²

Let g/(u_x)² be treated as a constant with the letter k.

Thus;

y = kx²

This is the form of a parabolic equation.

Thus, it has been proved that the projectile follows the path of a parabola.

Answer:

5.25%

Explanation:

From the question given above, the following data were obtained:

Accepted value = 238857 miles

Measured value = 226316 miles

Percentage error =.?

Next, we shall determine the absolute error. This can be obtained as follow:

Accepted value = 238857 miles

Measured value = 226316 miles

Absolute Error =?

Absolute Error = |Measured – Accepted|

Absolute Error = |226316 – 238857|

Absolute Error = 12541

Finally, we shall determine the percentage error. This can be obtained as follow:

Accepted value = 238857 miles

Absolute Error = 12541

Percentage error =.?

Percentage error = absolute error / accepted value × 100

Percentage error

= 12541 / 238857 × 100

= 1254100 / 238857

= 5.25%

Therefore, the percentage error is 5.25%.

Answer:

Unlike hard disks, which use magnetic charges to represent 1s and 0s, Compact Disks, DVD's or Blue Rays use reflected light.

Explanation:

The way CD's work is that they are hit by a laser beam which is reflected on the surface of the disc. These disks have some valleys and mountains that reflect light differently so the CD player will interpret these differences in reflection as data which will then be turned into music, videos or computer files.

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

Answer:

. The SI unit of volume is the cubic meter (m3), which is a derived unit.

Liter (L) is a special name for the cubic decimeter (dm3).

Answer:

Density → Mass and Length.

Acceleration → Length and Time.

Force → Mass, Length and Time.

Pressure → Mass, Length and Time.

Work → Mass, Length and Time.

Answer:

Explanation:

What we are basically looking for here is how long it takes the first stone to hit the water. We have everything we need to figure that out. We will use the equation

Δx = . Filling in, we will solve for t, the time is takes the first stone to hit the water (which is the same for both since they both hit the water at the same time):

which is a quadratic that we will have to factor. Get it into standard form, setting it equal to 0:

and factor to get that

t = 3.2 s and t = -2.8 s

Since time can't ever be negative, it takes 3.2 s for the stones to hit the water.

Answer:

La rapidez del móvil es 12 kilómetros por hora.

Explanation:

Asumamos que el móvil experimenta un movimiento rectilíneo uniforme, cuya ecuación cinemática es la siguiente:

[tex]v = \frac{x}{t}[/tex] (1)

Where:

[tex]x[/tex] - Distancia recorrida, en kilómetros.

[tex]t[/tex] - Tiempo, en horas.

[tex]v[/tex] - Rapidez, en kilómetros por hora.

Si tenemos que [tex]x = 6000\,m[/tex] y [tex]t = 30\,min[/tex], entonces la rapidez del móvil es:

[tex]v = \frac{6000\,m\times \frac{1}{1000}\,\frac{km}{m}}{30\,min \times \frac{1}{60}\,\frac{h}{min} }[/tex]

[tex]v = 12\,\frac{km}{h}[/tex]

La rapidez del móvil es 12 kilómetros por hora.

Answer:

t=1/4v1

Explanation:

Given data

Car one

Speed =v1

Time =t

Distance =1/4 mile

Given data

Car two

Speed =v1/2

Time =t

Distance =d

Speed =distance/time

v1=1/4/t

v1t=1/4

t=1/4*1/v1

t=1/4v1 seconds

Answer:

F = 0.414 N

Explanation:

Given that,

Magnetic flux density,[tex]B=3.6\times 10^{-2}\ T[/tex]

The length of the wire, l = 24 m

Current, I = 0.48 A

We need to find the force acting on the wire. The formula for the force is given by:

[tex]F=ILB[/tex]

Put all the values,

[tex]F=0.48\times 24\times 3.6\times 10^{-2}\\\\F=0.414\ N[/tex]

So, the force acting on the copper wire is equal to 0.414 N.

The magnetic force of the copper wire is  41.472 N.

The magnetic force of the copper wire is calculated by applying the following equation.

F = BIL x sinθ

Where;

F = (3.6 x 10⁻²) x (48) x 24 x sin(90)

F = 41.472 N

Thus, the magnetic force of the copper wire is  41.472 N.

Learn more about magnetic force here:  https://brainly.com/question/13277365

Answer:

R = 0.86 m

Explanation:

The formula for the range of the projectile motion can be used here:

[tex]R = \frac{v^2 Sin2\theta}{g}[/tex]

where,

R = Range of projectile = distance between Jake and Fred = ?

v = launch speed = 3 m/s

θ = Launch Angle = 35°

g = acceleration due to gravity = 9.81 m/s²

Therefore,

[tex]R = \frac{(3\ m/s)^2Sin[(2)(35^o)]}{9.81\ m/s^2}\\\\[/tex]

R = 0.86 m

Direct current (DC) is the flow of electric charge in only one direction. It is the steady state of a constant-voltage circuit. Most well-known applications, however, use a time-varying voltage source. Alternating current (AC) is the flow of electric charge that periodically reverses direction.

Answer:

0.0366 m

Explanation:

We are given;

Current density; J = 540 A/cm² = 540 × 10⁴ m

Current; I = 0.57 A

Now, formula for current density is;

J = I/A

Where A is area = πr²

Thus;

J = I/(πr²)

r = √(I/(Jπ))

r = √(0.57/(540π))

r = 0.0183 m

Diameter = 2 × radius

Diameter = 2 × 0.0183

Diameter = 0.0366 m

Answer:

An object overall change in position

Explanation:

ans maybe corre6

Answer:

the tension of the rope is 34.95 N

Explanation:

Given;

length of the rope, L = 3 m

mass of the rope, m = 0.105 kg

frequency of the wave, f = 40 Hz

wavelength of the wave, λ = 0.79 m

Let the tension of the rope = T

The speed of the wave is given as;

[tex]v = f\lambda = \sqrt{\frac{T}{\mu} } \\\\where;\\\\\mu \ is \ mass \ per \ unit \ length\\\\\mu = \frac{0.105}{3} = 0.035 \ kg/m\\\\v = f\lambda = 40 \times 0.79 = 31.6 \ m/s\\\\v = \sqrt{\frac{T}{\mu} } \\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu\\\\T = (31.6^2)(0.035)\\\\T = 34.95 \ N[/tex]

Therefore, the tension of the rope is 34.95 N

Answer:

attached below

Explanation:

The initial conditions :

x(0) = - 9 inches = -3/4 ft

x'(0) = - 2 ft/sec

spring stretched  3 inches = 1/4 ft

mass = w / g = 4 Ib / 32 ft/sec^2 = 1/8  slug

the spring constant ( k ) = w / l  = 4 / ( 1/4 ) = 16 Ib/ft

applying the second law of motion

m d^2x/dt^2 +  b dx/dt  + kx

= 1/8 d^2x/dt^2  + 2 dx/dt  + 16 x

= d^2x/dt^2  + 16 dx/dt  +  128 x  ------- ( 1 )

we will resolve the above equation to obtain the required equation of motion  x( t )

Attached below is the remaining part of the solution

Answer:

[tex]d=0.59m[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=67.3 kg[/tex]

Spring constant [tex]\mu=1.23 * 10^3 N/m[/tex]

Fall Height [tex]h=0.921m[/tex]

Generally the Energy theorem equation for momentum is mathematically given by

Change in KE=Work done by gravity + work done by spring

[tex]0=mg*(h + d) - \frac{\mu d^2}{2}[/tex]

[tex]0=(67.3 * 9.81 (0.921 + d)) -\frac{(1.23 * 10^3 * d^2}{ 2}[/tex]

[tex]0=608.1-660.213d-615d^2[/tex]

Solving Quadratic equation

[tex]d=0.59m[/tex]

Answer:

D.

Explanation:

Force and distance are inversely related, so a greater distance results in a weaker force.

Answer:

Explanation:

This is a recoil problem, which is just another application of the Law of Momentum Conservation. The equation for us is:

[tex][m_av_a+m_ev_e]_b=[m_av_a+m_ev_e]_a[/tex] which, in words, is

The momentum of the astronaut plus the momentum of the piece of equipment before the equipment is thrown has to be equal to the momentum of all that same stuff after the equipment is thrown. Filling in:

[tex][(90.0)(0)+(.50)(0)]_b=[(90.0)(v)+(.50)(-4.0)]_a[/tex]

Obviously, on the left side of the equation, nothing is moving so the whole left side equals 0. Doing the math on the right and paying specific attention to the sig fig's here (notice, I added a 0 after the 4 in the velocity value so our sig fig's are 2 instead of just 1. 1 is useless in most applications).

0 = 90.0v - 2.0 and

2.0 = 90.0v so

v = .022 m/s This is the rate at which he is moving TOWARDS the ship (negative was moving away from the ship, as indicated by the - in the problem). Now we can use the d = rt equation to find out how long this process will take him if he wants to reach his ship before he dies.

12 = .022t and

t = 550 seconds, which is the same thing as 9.2 minutes

Explanation:

Given that,

The voltages across them are 40,50 and 60 volts respectively, and the charge on each condenser is 6×10⁻⁸ C.

(a) Capacitance of capacitor 1,

[tex]C_1=\dfrac{Q}{V_1}\\\\C_1=\dfrac{6\times 10^{-8}}{40}\\\\C_1=1.5\times 10^{-9}\ F\\\\C_1=1.5\ nF[/tex]

Capacitance of capacitor 2,

[tex]C_2=\dfrac{Q}{V_2}\\\\C_2=\dfrac{6\times 10^{-8}}{50}\\\\C_2=1.2\times 10^{-9}\ F\\\\C_2=1.2\ nF[/tex]

Capacitance of capacitor 3,

[tex]C_3=\dfrac{Q}{V_3}\\\\C_3=\dfrac{6\times 10^{-8}}{60}\\\\C_3=1\times 10^{-9}\ F\\\\C_3=1\ nF[/tex]

(b) The equivalent capacitance in series combination is :

[tex]\dfrac{1}{C}=\dfrac{1}{C_1}+\dfrac{1}{C_2}+\dfrac{1}{C_3}\\\\\dfrac{1}{C}=\dfrac{1}{1.5}+\dfrac{1}{1.2}+\dfrac{1}{1}\\\\C=0.4\ nF[/tex]

Hence, this is the required solution.

Answer:

Average speed = 24 km/h

Explanation:

Given the following data;

Uniform speed A = 30 km/h

Uniform speed B = 20 km/h

To find the average speed;

Mathematically, the average speed of an object is given by the formula;

[tex] Average \; speed = \frac {total \; distance}{total \; time} [/tex] ..... equation 1

Total time = TA + TB

[tex] T_{A} = \frac {x}{30} [/tex]

[tex] T_{B} = \frac {x}{20} [/tex]

[tex] Total \; time = \frac {x}{30} + \frac {x}{20} [/tex]

[tex] Total \; time = \frac {5x}{60} [/tex]

Total distance = x + x

Total distance = 2x

Substituting the values into equation 1;

[tex] Average \; speed = \frac {2x}{\frac {5x}{60}} [/tex]

[tex] Average \; speed = \frac {2x*60}{5x} [/tex]

[tex] Average \; speed = \frac {120}{5} [/tex]

Average speed = 24 km/h

Answer:

(a) i) The distance travelled by the cycle in half round is approximately 65.97 m

ii) The displacement is 42 m

(b) (i) The distance travelled in one round is approximately 131.95 m

(ii) The displacement of the cycle in one round is 0

Explanation:

The diameter of the track through which the cycle travels, D = 42 m

(a) i) Half round is the motion of half the length of the circular path

The distance travelled by the cycle in half round = The length of half the circular track = (1/2) × π × D

∴ The distance travelled by the cycle in half round = (1/2) × π × 42 m = 21·π m ≈ 65.97 m

ii) The displacement half round = The change in the location of the cycle = The difference between the start and stop locations of the cycle on a straight line after half round

The angle at the center of the circular path the cycle turns in half round  = 180°

Therefore, the path between the start and stop location of the cycle in half round = The diameter of the circular track

The displacement of the cycle in half round = The diameter of the circular track = 42 m

(b) (i) The distance travelled in one round = The perimeter of the circular track = π·D

∴ The distance travelled in one round = π × 42 m ≈ 131.95 m

(ii) The displacement of the cycle in one round = The change in the location of the cycle

The start and stop location of the cycle after moving one round is the same, therefore, there is no change in the location of the cycle.

Therefore we have;

The displacement of the cycle in one round = 0 (no change in location of the cycle)