2-Methycyclohexanol is prepared commercially by catalytic hydrogenation of ocresol (2-methylphenol) and consists of a mixture of cis and trans isomers. (Note the spectrum is for the mixture.) (Hint: What do the peaks at 3.05 ppm and 3.75 ppm represent and what does their integration show

Answers

Answer 1

Answer:

Explanation:

From the information given :

The cis and trans isomer are in the ratio of 1:3, and the description of how the ratio of the cis- and trans-2-methylcyclohexanols from the 1H NMR spectrum can be explained as follows:

We are being told that the trans isomer's peak is 3.75 ppm (part per million). However, because the methyl group is far away from the OH group, it is less shilled than the cis isomer, which peaked at 3.05. Thus, the peak at 3.05 occurs in an area whose integration is three (3) times more than the peak at 3.75.


Related Questions

What is the acceleration of a 7 kg mass if a force of 68.6 N is used to move it toward earth

Answers

Answer:

acceleration = force/mass

                 = (68.6+mg)/7

                 = 19.6 m/s²

Explanation:

9.8 m/s² is the acceleration acting on 7 kg mass if force of 68.6 N  is used to move it towards earth.

What is force?

Force is defined as a cause which is capable of changing the motion of an object. It can cause an object which has mass to change it's velocity. It is also simply a push or a pull . It has both magnitude as well as direction.Hence, it is a vector quantity.

It has SI units of Newton and is represented by'F'.Newton's second law states that force which acts on an object is equal to momentum which changes with time. If mass of object is constant, acceleration is directly proportional to net force acting on an object.

The concepts which related to force are thrust and torque .Thrust increases the velocity of an object and torque produces change in rotational speed of an object.

Learn more about force,here:

https://brainly.com/question/19734564

#SPJ2

PLEASE HELP!!!
what was the volume of air that has a volume of 6.00L at 120870 Pa, if the original pressure was 250020 Pa?

Answers

Answer:

The answer is 2.90 L

Explanation:

In order to find the original pressure , we use the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

Since we are finding the original volume

[tex]V_1 = \frac{P_2V_2}{P_1} \\[/tex]

From the question

P1 = 250020 Pa

P2 = 120870 Pa

V2 = 6 L

We have

[tex]V_1 = \frac{120870 \times 6}{250020} = \frac{725220}{250020} \\ = 2.90064794...[/tex]

We have the final answer as

2.90 L

Hope this helps you

What is the gravitational potential energy, in joules, of a 75 kg person that is 1000.0
meter above the ground? Gravitational acceleration = 9.81 m/s2

Answers

Answer:

In this example, a 3 kilogram mass, at a height of 5 meters, while acted on by Earth's gravity would have 147.15 Joules of potential energy, PE = 3kg * 9.81 m/s 2 * 5m = 147.15 J. 9.81 meters per second squared (or more accurately 9.80665 m/s 2 ) is widely accepted among scientists as a working average value for Earth's gravitational pull.

Explanation:

Consider the reaction of 30.0 mL of 0.235 M BaI₂ with 20.0 mL of 0.315 M Na₃PO₄.

Which of the following compounds would be the precipitate that forms?
a) Bal2
b) Na3PO4
c) Ba3(PO4)2
d)Nal

Answers

Answer:

C

Explanation:

Because sodium is basically always soluble with any compound, it is between a and c. a is part of the reactant so it cant be A. So C.

The statement, that describes the compounds would be the precipitate that forms in the reaction is "Ba3(PO4)2"

What is precipitate?

Precipitate is a solid generated by a change in a solution, usually due to a chemical reaction or a change in temperature that reduces a solid's solubility.

What is compound?

The combination of more than one element will be identified ad compound.

When cations and anions in aqueous solution combine to create an insoluble ionic solid called a precipitate, double displacement reactions occur, resulting in the formation of a solid form residue. Except for salts of Group 1 metals and ammonium, salts of phosphates and carbonates ions are insoluble, according to the solubility flow chart. The production of a solid white precipitate is used to demonstrate the insoluble nature of barium phosphate.

Hence the correct option is c.

Learn more about precipitate here,

https://brainly.com/question/18109776

#SPJ2

Which 2 letters have the most kinetic energy?

W

X

Y

Z

Answers

Answer:

See Explanation (X and Z)

Explanation:

The question has missing details as the attachment that illustrates the graph is missing.

I'll answer this question using the attached.

Kinetic energy increases as height decreases

Base on the attachment, from order of highest height to the least, we have:

W

Y

Z

X

So, we can conclude that X has the highest kinetic energy and it is immediately followed by Z

Hence:

X and Z answers the question

I don’t really understand, if anybody can help I’ll really appreciate it ! Thank you.

Answers

Answer:

175

Explanation:

An electrochemical cell has an Eocell of 1.50 V and transfers 1 mole of electrons. The Faraday constant is 96,485 C/mol e-.
What is the value of delta G?

Answers

Answer:

ΔG° = -1.45 × 10⁵ J

Explanation:

Step 1: Given data

Standard cell potential (E°cell): 1.50 VMoles of electrons transferred (n): 1 mol e⁻Faraday constant (F): 96,485 C/mol e⁻

Step 2: Calculate the standard Gibbs free energy change (ΔG°)

We will use the following expression.

ΔG° = -n × F × E°cell

ΔG° = -1 mol e⁻ × 96,485 C/mol e⁻ × 1.50 V

ΔG° = -1.45 × 10⁵ J

By apply Gibbs's free energy, the value of delta G is equal to -144727.5 Joules.

Given the following data:

Faraday constant = 96,485 C/mol e-[tex]E^{ \circ}_{cell}[/tex] = 1.50 VoltsNumber of moles of electrons = 1 mol

To determine the value of delta G, we would apply Gibbs's free energy:

Mathematically, Gibbs's free energy is given by the formula:

[tex]\Delta G^\circ = -nFE^{ \circ}_{cell}[/tex]

Where:

F is Faraday constant.n is the number of moles.[tex]E^{ \circ}_{cell}[/tex] is the electromotive force.

Substituting the given parameters into the formula, we have;

[tex]\Delta G^\circ = -1 \times 96485 \times 1.50[/tex]

[tex]\Delta G^\circ = -144727.5[/tex]

Delta G = -144727.5 Joules

Read more: https://brainly.com/question/13318988

How many atoms of Chlorine are in 1.00 mol of Chlorine gas?
6.022 x 10∧23
3.01 x 10∧23
6.022 x 10∧24

Answers

Answer:

6.02 × 10²³ atoms Cl₂

Explanation:

Avagadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.

Step 1: Define

1.00 mol Cl₂ (g)

Step 2: Use Dimensional Analysis

[tex]1.00 \hspace{3} mol \hspace{3} Cl_2(\frac{6.02(10)^23 \hspace{3} atoms \hspace{3} Cl_2}{1 \hspace{3} mol \hspace{3} Cl_2} )[/tex] = 6.02 × 10²³ atoms Cl₂

Help :( the blue boxes are clickable

Answers

Answer:

I am sure they are why won't they

Write the net ionic equation for the reaction of aqueous solutions of ammonium chloride and iron(III) hydroxide.

Answers

Answer:

[tex]Fe(OH)_3(s)\rightarrow Fe^{3+}(aq)+3OH^-(aq)[/tex]

Explanation:

Hello.

In this case, for the reaction between aqueous solutions of ammonium chloride and iron (III) hydroxide, we have the following complete molecular reaction:

[tex]3NH_4Cl(aq)+Fe(OH)_3(s)\rightarrow 3NH_4OH+FeCl_3[/tex]

And the full ionic equation, taking into account that the iron (III) hydroxide cannot be dissolved as it is insoluble in water:

[tex]3NH_4^+(aq)+3Cl^-(aq)+Fe(OH)_3(s)\rightarrow 3NH_4^+(aq)+3OH^-(aq)+Fe^{3+}(aq)+3Cl^-(aq)[/tex]

Finally, the net ionic equation, considering that spectator ions are NH₄⁺, Cl⁻ as they are both the left and right side, therefore, the net ionic equation is:

[tex]Fe(OH)_3(s)\rightarrow Fe^{3+}(aq)+3OH^-(aq)[/tex]

Best regards.

The net ionic equation for the reaction of aqueous solutions should be Fe(Oh)3 ➡Fe3+(aq) + 3OH^-(aq).

Net ionic equation:

When the reaction lies between the between aqueous solutions of ammonium chloride and iron (III) hydroxide

So, here the total reaction should be

3NH4Cl(aq) + Fe(OH)3(s) ➡ 3NH4OH + FeCl3

So, here net ionic equation, considering that spectator ions are NH₄⁺, Cl⁻ since they are both the left and right sides.

Learn more about an equation here: https://brainly.com/question/19721671

How do the test variables (independent variables) and outcome variables (dependent variables) in an experiment compare? A. The test variables (independent variables) and outcome variables (dependent variables) are the same things. B. The test variable (independent variable) controls the outcome variable (dependent variable). C. The test variable (independent variable) and outcome variable (dependent variable) have no affect on each other. D. The outcome variable (dependent variable) controls the test variable (independent variable).

Answers

Answer:

I'm on the exact same queston

Answer:

The test variable (independent variable) controls the outcome variable (dependent variable)

Explanation:

its right on study island

Which pair of elements would most likely have a similar arrangement of outer
electrons and have similar chemical behaviors?
boron and aluminum
helium and fluorine
carbon and nitrogen
chlorine and oxygen

Answers

Answer:

Boron and Aluminum

Explanation:

If you write the electron configuration for boron and aluminum, you get:

[tex]1s^22s^22p^1[/tex] for boron and [tex]1s^22s^22p^63s^23p^1[/tex] for aluminum. Both have 3 valance electrons and has 2 electrons in a s-orbital and 1 in a p-orbital. These valance electron similarities are based on the column/group the elements are. Therefore, Boron and Aluminum have similar chemical behaviours and similar arrangement of outer/valance electrons.

How many moles would be in 24.23 grams of SrSO4?
Use two digits past the decimal for all values.

Answers

Answer:

about 0.13 mol

Explanation:

To find number of mols when given grams you first have to find the molar mass of the compound. This is done by adding up the atomic masses of the element in the compound. So Sr= 88 g/mol S=32 g/mol and O=16 g/mol. Then 88+32+(16x4)=184. Then using this you can convert from grams to mols by dividing the grams by the molar mass. So, 24.23/184 equals about 0.13 mol.

5 advantages of storing oil underground in salt dome?

Answers

Answer:

Salt domes storage has advantages in cost, security, environmental risk, and maintenance. Salt formations offer the lowest cost, most environmentally secure way to store crude oil for long periods of time. Stockpiling oil in artificially-created caverns deep within the rock-hard salt costs historically about $3.50 per barrel in capital costs. Storing oil in above ground tanks, by comparison, can cost $15 to $18 per barrel - or at least five times the expense. Also, because the salt caverns are 2,000-4,000 feet below the surface, geologic pressures will sea; any crack that develops in the salt formation, assuring that no crude oil leaks from the cavern. An added benefit is the natural temperature differential between the top of the caverns and the bottom - a distance of around 2,000 feet; the temperature differential keeps the crude oil continuously circulating in the caverns, giving the oil a consistent quality.

Check all of the boxes that are true about the proton:

it is outside the nucleus
it has a positive charge
it has no mass
it has a negative charge
it is inside the nucleus
it is the same as the atomic number
it is the same as the number of neutrons
75% of the isotopes have a mass

Answers

Answer:

it is outside the nucleus  F

it has a positive charge  T

it has no mass  F

it has a negative charge  F

it is inside the nucleus  ...it is part OF the nucleus.

it is the same as the atomic number  T

it is the same as the number of neutrons  F

75% of the isotopes have a mass ima just guess cuz i dunno about this one...i think it matters on the atom element.

Explanation:

1) The speed constant for the second order reaction in the gas phase
It varies with the temperature according to the table below. Calculate the activation energy for the process, according to Arhhenius' equation

Answers

Answer:

41.7 kJ/mol

Explanation:

ln(k) = ln(A) − Eₐ/(RT)

Pick any two points.  I'll choose 100°C and 400°C.

When T = 100°C = 373 K, k = 1.10×10⁻⁹ L/mol s:

ln(1.10×10⁻⁹) = ln(A) − Eₐ/(R × 373)

When T = 400°C = 673 K, k = 4.40×10⁻⁷ L/mol s:

ln(4.40×10⁻⁷) = ln(A) − Eₐ/(R × 673)

Subtract the two equations and solve:

ln(4.40×10⁻⁷) −  ln(1.10×10⁻⁹) = -Eₐ/(R × 673) + Eₐ/(R × 373)

5.991 = 0.00120 Eₐ/R

Eₐ/R = 5013.4

Eₐ = 41700 J/mol

Eₐ = 41.7 kJ/mol

I need help with this please
Thank you

Answers

Answer:

From fastest to slowest its: (4)A to B, (1)E to F, (3)C to D, (2)D to E

Explanation:

The steeper the line is the faster she went. D to E she didn't make any progress because the line is straight. Sry I'm terrible at explaining things.

Please help me ! Thank you

Answers

Answer:

10

Explanation:

Answer:
10
Explanation:

3. A student took a calibrated 200.0 gram mass, weighed it on a laboratory balance, and
found it read 196.5 9. What was the student's percent error?

Answers

Answer:

The answer is 1.71 %

Explanation:

The percentage error of a certain measurement can be found by using the formula

[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]

From the question

actual mass = 200 g

error = 200 - 196.59 = 3.41

We have

[tex]p(\%) = \frac{3.41}{200} \times 100 \\ = 1.705[/tex]

We have the final answer as

1.71 %

Hope this helps you

Please help
What is an element

Answers

Answer:

An element is atoms with the same number of protons.

Explanation:

Protons, electrons, and neutrons.

Protons and electrons and others

An insulated container is used to hold 47.0 g of water at 23.5°C. A sample of copper weighing 10.3 g is placed in a dry test tube and
heated for 30 minutes in a boiling water bath at 100.0°C. The heated test tube is carefully removed from the water bath with laboratory
tongs and inclined so that the copper slides into the water in the insulated container. Given that the specific heat of solid copper is
0.385 J/(g.°C), calculate the maximum temperature of the water in the insulated container after the copper metal is added.

Answers

Answer:

[tex]T_f=25.0\°C[/tex]

Explanation:

Hello.

In this case, considering that the sample of hot copper is submerged into the water and the container is isolated, the heat lost by the copper is gained by the water so we can write:

[tex]Q_{Cu}=-Q_w[/tex]

In terms of mass, specific heat and temperature we write:

[tex]m_{Cu}C_{Cu}(T_f-T_{Cu})=-m_wC_w(T_f-T_w)[/tex]

Whereas the final temperature is the same for both copper and water because they are in contact until thermal equilibrium is reached. In such a way, the required maximum temperature no more than the equilibrium temperature and is computed as shown below:

[tex]T_f=\frac{m_{Cu}C_{Cu}T_{Cu}+m_wC_wT_w}{m_{Cu}C_{Cu}+m_wC_w}[/tex]

Thus, plugging the given data in the formula, we obtain:

[tex]T_f=\frac{10.3g*0.385\frac{J}{g\°C}*100\°C +47.0g*4.184\frac{J}{g\°C}*23.5\°C }{10.3g*0.385\frac{J}{g\°C}+47.0g*4.184\frac{J}{g\°C}}\\\\T_f=25.0\°C[/tex]

Which is a small change considering the initial one, because the mass of water is greater than the mass of copper as well as for the specific heats.

Best regards!

The maximum temperature of the water in the insulated container after the copper metal is added is 25 °C

From the question given above above, the following data were obtained:

Mass of water (Mᵥᵥ) = 47 g

Temperature of water (Tᵥᵥ) = 23.5°C

Specific heat capacity of water (Cᵥᵥ) = 4.184 J/gºC

Mass of copper (M꜀) = 10.3 g

Temperature of copper (M꜀) = 100 °C

Specific heat capacity of copper (C꜀) = 0.385 J/gºC

Equilibrium temperature (Tₑ) =?

The equilibrium temperature of the mixture can be obtained as follow:

Heat loss by copper = Heat gained by water

Q꜀ = Qᵥᵥ

M꜀C꜀(M꜀ – Tₑ) = MᵥᵥCᵥᵥ(Tₑ– Mᵥᵥ)

10.3 × 0.385 (100 – Tₑ) = 47 × 4.184 (Tₑ – 23.5)

3.9655 (100 – Tₑ) = 196.648 (Tₑ – 23.5)

Clear bracket

396.55 – 3.9655Tₑ = 196.648Tₑ – 4621.228

Collect like terms

396.55 + 4621.228 = 196.648Tₑ + 3.9655Tₑ

5017.778 = 200.6135Tₑ

Divide both side by 200.6135

Tₑ = 5017.778 / 200.613

Tₑ = 25 °C

Thus, the equilibrium temperature of the mixture is 25 °C. Therefore, the maximum temperature of the water in the insulated container is 25 °C

Learn more: https://brainly.com/question/18250635

a compound has a molecular formular of C12H24O6.What is the compound's empirical formula ​

Answers

Answer:

The empirical formula for C12 H24 O6 is C2 H4 O.

Answer:

We are given the formula of the compound:

C12H24O6

The empirical formula of a molecular formula is the lowest whole number ratio between the number of atoms of each element

The ratio of C to H to O in the given formula is :

12 : 24 : 6

we notice that all 3 of the numbers have 6 in common. Dividing all three of the numbers by 6, we get:

2 : 4 : 1

Hence, the ratio of Carbon to Hydrogen to Oxygen in the empirical formula of the given compound is 2 : 4 : 1 ,

Empirical Formula = C2H4O

What is the volume of a substance that has a mass of 59 g and a density of 1.98 g/mL?
(show all work)

Answers

Answer:

29.8

Explanation:

The formula for volume is mass/ density, so 59/1.98. 29.8 is the answer.

The pKb values for the dibasic base B are pKb1=2.10 and pKb2=7.54. Calculate the pH at each of the points in the titration of 50.0 mL of a 0.60 M B(aq) solution with 0.60 M HCl(aq).

Answers

Complete Question

The pKb values for the dibasic base B are pKb1=2.10 and pKb2=7.54. Calculate the pH at each of the points in the titration of 50.0 mL of a 0.60 M B(aq) solution with 0.60 M HCl(aq).

(a) before addition of any HCl (b) after addition of 25.0 mL of HCl

Answer:

a The value  is  [tex]pH =12.81[/tex]

b [tex]pH  = 11.9[/tex]

Explanation:

From the question we are told that

  The first pKb value  for B is [tex]pK_b_1  =  2.10[/tex]

   The second pKb value  for B is [tex]pK_b_2  =  7.54[/tex]

     The volume is  [tex]V =   50.0 mL   =[/tex]

     The  concentration  of  B is  [tex][B]  =  0.60 M[/tex]

     The concentration of [tex]C_A =  0.60 M[/tex]

Generally the reaction equation showing the first dissociation of B is  

[tex]\ce{B_{(aq) } + H_2O _{(l)} <=> BH^+ _{(aq)}  +  OH^- _{(aq)} }[/tex]

Here the ionic  constant for B is mathematically represented as

      [tex]K_i  =  \frac{[BH^+] [OH^-]}{[B]}[/tex]

Let denot the concentration of  [BH^+]  as  z  and  since [tex][BH^+] =  [OH^-][/tex] then [tex][OH^-][/tex] is also  z

So  [B] =  0.60  -  z  

Here [tex]K_i[/tex] is ionic constant for the first reaction of a dibasic base B and the value is

   [tex]K_i  =  7.94 *10^{-3}[/tex]

So

      [tex] 7.94 *10^{-3}=  \frac{z^2}{ 0.60 - z}[/tex]

=>   [tex]z^ 2 + 0.00794 z - 0.00476[/tex]

using quadratic formula to solve this equation

     [tex]z = 0.0651[/tex]

Hence the concentration of  [tex]OH^{-}[/tex] is   [tex][OH^-] =0.0651[/tex]

Generally  [tex]pOH =  -log [OH^-][/tex]

=>    [tex]pOH =  -log (0.065)[/tex]

=>    [tex]pOH = 1.187 [/tex]

Generally the pH is mathematically represented as

    [tex]pH = 14 - 1.187[/tex]

      [tex]pH =12.81[/tex]

Generally the volume of [tex]HCl[/tex] at the second dissociation of the base B is   [tex] 50 mL [/tex]

The volume of the [tex]HCl[/tex] half way to the first dissociation of the base is 25mL

Now the pOH at half way to the first dissociation of the base is  

     [tex]pOH  =  -log(K_i)[/tex]

=>   [tex]pOH  =  -log(0.00794)[/tex]

=>   [tex]pOH  =  2.100[/tex]

Generally the pH after addition of 25.0 mL of HCl is  

    [tex]pH  =  14 -  2.100[/tex]\

=>   [tex]pH  = 11.9[/tex]

The first dissociation's equation is as follows:

[tex]B(aq) + H_2O(l) \leftrightharpoons BH^{+} (aq) + OH^{-}(aq) \\\\[/tex]

Constant of base ionization

[tex]\to K_{bl}=\frac{[BH^{+}][OH^{-}]}{[B]}\\\\ \to 7.94\times 10^{-3} = \frac{x\times x}{(0.95- x)} \\\\\to 7.94\times 10^{-3} = \frac{x^2}{(0.95- x)} \\\\\to x^2=7.94\times 10^{-3} (0.95-x) \\\\\to x^2=7.543\times 10^{-3} - 7.94\times 10^{-3} x) \\\\\to x^2=7.543\times 10^{-3} - 7.94\times 10^{-3} x) \\\\\to x = 0.0830\ M\\\\[/tex]

So,

[tex]\to [OH^{-}] = 0.0830\ M\\\\[/tex]

The second dissociation of the base equation is

[tex]BH^{+}\ (aq) + H_20\ (l) \leftrightharpoons BH_2^{2+}\ (aq) + OH^{-}\ (aq) \\\\[/tex]

Constant of base ionization

[tex]\to K_{bl}=\frac{[BH^{+}][OH^{-}]}{[B]}\\\\ \to 3.2 \times 10^{-8} =\frac{y \times (0.0830+y)}{(0.0830- y)}\\\\[/tex]

[tex]\to y= \frac{ 3.2 \times 10^{-8} \times (0.0830- y)}{ (0.0830+y)} \\\\ \to y= \frac{ 3.2 \times 10^{-8} \times (0.0830- y)}{ (0.0830+y)} \\\\ \to y = 3.2\times 10^{-8}[/tex]

So,

[tex]\to [OH^{-}] = 0.0830\ M \\\\\to pOH = 1.08 \\\\\to pH = 14.00 - pOH = 12.92\\\\[/tex]

Learn more:

brainly.com/question/15412094

How many atoms are in 10 g of He

Answers

Answer:

6.7

10

23

atoms of H

Explanation:

what’s the most abundant isotope of lawrencium

Answers

Answer:

266Lr

Thirteen isotopes of lawrencium are currently known; the most stable is 266Lr with a half-life of 11 hours, but the shorter-lived 260Lr (half-life 2.7 minutes) is most commonly used in chemistry because it can be produced on a larger scale.

Explanation:

hopefully that helps you

What happens when the elements in group 2 react with water?

Answers

Answer:

The Group 2 metals become more reactive towards the water as you go down the Group.

Explanation:

These all react with cold water with increasing vigour to give the metal hydroxide and hydrogen. ... You get less precipitate as you go down the Group because more of the hydroxide dissolves in the water. Summary of the trend in reactivity.

Please mark me brainliest! hope this helped!

God bless!

Selenium has six valence electrons. What is the valence of selenium?

HELP ILL MARK BRAINLEST

Answers

the valence of selenium is 6

The image below shows a model of the atom. Which subatomic particle does the arrow in
the image below identify?
?
A. electron
B. neutron
C. orbital
D. proton

Answers

The correct answer is A. Electron

Explanation:

The model of this atom depicts the nucleus of this in the center of the model, this section of the atom contains sub-particles known as protons and neutrons. Moreover, in the atom, the nucleus is surrounded by three sub-particles that orbit or move around the nucleus. These sub-particles are the electrons; these differ from other sub-particles because they have a negative charge and they are not part of the nucleus. Also, these move around the nucleus is orbits, although they move similarly to waves. According to this, the correct answer is A.

What volume of 1.27 M HCl is required to prepare 197.4 mL of 0.456 M HCl

Answers

Answer:

70.88 mL volume of 1.27 M of HCl is required.

Explanation:

Given data:

Initial volume = ?

Initial  molarity =  1.27 M

Final volume = 197.4 mL

Final molarity = 0.456 M

Solution:

Formula:

M₁V₁ = M₂V₂

Now we will put the values in formula.

1.27 M × V₁ =  0.456 M × 197.4 mL

V₁ = 0.456 M × 197.4 mL/1.27 M

V₁ = 90.014M.mL/1.27 M

V₁ = 70.88 mL

70.88 mL volume of 1.27 M of HCl is required.

Other Questions
What is gained in when you examine the work of famous photographers? a. Inspirationb. new ideas c. learn technical skills d. all of the above 1. Why was the creation of the Fundamental Orders of Connecticut an important milestone in the growth of representative government in the colonies? A. It was a written constitution and is considered the first in the colonies. B. It was a social contract requiring settlers to sign a loyalty oath to Britain. C. It established the first legislature in the colonies, the House of Burgesses. D. It set the precedent for the idea of judicial review for laws from Congress. CAN U help mw with this qustion Individuals who lack lactase are unable to brea down the sugar lactose during digestionand are said to be lactose intolerant. Which type of biomolecule is lactase?A) protein B) lipid C) carbohydrate D) nucleic acid 32 N of Force. 37 N force. How strong is the net force and in which direction? Why would a lord face at least as much danger from invaders as a peasant would?a. The lord would be likely to have less protection from others.b. The lord could not defend himself as well as a peasant could.c. The lord would have more to lose, in terms of wealth and property.d. The lord would be more likely to anger invaders. How do you find what p is? A solution of 0.050 M benzoic acid, HC7H5O2 , is 3.5% ionized. at 25 oC. a) What are the [H ] and pH of this solution U GUYS I RLLY NEED THIS SHII CAN U EXPLAIN IT IF U CAN DO IT LET ME KNOW AND ILL GIVE 100 PTS Some states that had__ opposed Hamilton's debt plan.1.high debts2.little debt3.state banks4.Intro Jeronimo empregado na sociedade empresaria Produtos baianos Ltda., exercendo a funo de entregador. No ano em que completou 18 anos . Jeronimo se alistou e foi convocado para prestar servio militar, permanecendo no quartel por um ano. Findo esse periodo deu a respectiva baixa e retornou ao servio junto ao empregador. 4 tens + 14 ones = 5 tens + ___ ones Simplify 1/4 + 1.20 explain Priya has completed 12 exam questions. This is 60% of the questions on the exam. How many questions were in the exam Qu'est-ce que c'est? Use definite articles (lela,l', les ) for the first section. Use indefinite articles (un, une, des) for the second sectionYasmina is giving a tour of the local university pointing out various things. Fill in each blank with the appropriate definite article.1.C'estil bibliothque etlibrairie.2.Voilcaf deuniversit et voiciprofesseurs de maths!3.universit,ordinateurs sont (are) modernes. Please HELP!!!!!!!!!!!!!!!! Protons have a __________________ charge and are found in the area of an atom called ________________________. Following the Civil War, what effect did the decline in agricultural prices have upon farmers in the West? It hurt them by increasing the value of their mortgages. O It helped them by lowering the prices of manufactured goods. It hurt them by reducing the money they had to pay back loans. O It helped them by creating greater demand for their crops. What was the rallying cry of the Sons of Liberty?A)"Remember the Maine!"B)"Give us liberty or give us death!"C)"Fifty-four forty or fight!"D)"No taxation without representation!" under trustee georgia ,what were two items forbidden in the colony?