Answer:
I cant answer B, but I can answer A, and I don't think it is a scientifically reasonable plan.
Explanation:
The bag of sand weighs less than the gold statue, and yes the bag of sand seems like it would keep the trap from activating, but you would scientifically have to put something that was the same weight as the gold statue on the pedestal that the statue is on.
Were new substances created form old substances during electrolysis? Explain.
During electrolysis a metal chemically decompose and deposits on the cathode where as the metal from the other electrode forms its ions in the electrolyte solution.
What is electrolysis?Electrolysis is the process of chemical decomposition brought out by the passage of electricity through an electrolyte in which the decomposed metal deposits on one electrode.
Electrolysis involves oxidation of one metal and reduction of the other. The prediction of the products of electrolysis requires a consideration of several factors including the potential at which the competing species are discharged at the electrode , if the electrode used are reacted or inert etc.
The oxidation reaction involves the formation of cations in the solution and the reduction involves the deposition of metallic substance at the cathode.
To find more on electrolysis, refer here:
https://brainly.com/question/12054569
#SPJ2
*
new
The process of wave erosion is a relatively
phenomenon on Earth.
10 points
о
True
о
False
The answer fam is......... False
A piece of metal that has a density of 5.2 g/cm3 and a mass of 100 g was placed in a full jar of water. How many mL of water was spilled out of the jar? Note: one cm^3 = one mL
Answer:
100g / (5.2g/cm3)
= 100g / (5.2g / 1cm3)
= 100g x 1cm3 / 5.2 g
= 19.2 cm3
Since 1 cm3 = 1 ml, your answer is 19.2 ml.
The given density and mass of the metallic piece can be used to estimate the volume of the substance. The metal with a mass of 100 gm and a density of 5.2 g/cm³ has a volume of 19.23 ml.
What is the relation between density and volume?The density of the substance has been given by the ratio of mass to the volume of the substance in g/cm³ or g/mL. It shows the packaging of the molecules in the substances and has been in inverse relation to the volume.
The mass being constant and an increase in volume decreases the density of the substance and vice versa. The volume can be calculated as:
Volume = mass ÷ density
Given,
Density of the metal (ρ) = 5.2g/cm³
Mass of the metal piece (m) = 100g
Volume = V
Substituting the values above as:
ρ = m ÷ V
V = m ÷ ρ
V = 100 ÷ 5.2
= 19.23 mL
Therefore, 19.23 mL is the volume of water that spilled out of the jar.
Learn more about volume and density, here:
https://brainly.com/question/13799762
#SPJ2
I WIl GIVE YOU BRAINLIEST
Answer:
"A" i'm pretty sure
Hope this helps
Question
What causes a water molecule to be polar?
A. The Oxygen atom is larger and stronger than the Hydrogen atoms so the electrons spend more of their time nearer the hydrogen
B. The Oxygen atom is smaller and weaker than the Hydrogen atoms so the electrons spend more of their time nearer the oxygen
C. The Oxygen atom is smaller and weaker than the Hydrogen atoms so the electrons spend more of their time nearer the hydrogen
D.The Oxygen atom is larger and stronger than the Hydrogen atoms so the electrons spend more of their time nearer the oxygen
Answer:
The correct option is D
Explanation:
Water molecules are polar because there structures are made up two sides; the positively charged side (the hydrogen side) and the negatively charged side (the oxygen side). The atoms in the water molecule are joined together by covalent bond - meaning there is sharing of electrons between the constituent atoms. The oxygen atom is bigger/larger (in size) and has a higher electronegativity (ability to attract electrons) hence, the electrons tend to spend more time around the oxygen than the hydrogen atom.
Neturally an atom is neutral in charge why
Answer
Explanation:
an atom is usually define as a perfect balance of electrons and protons
the mass of an atomic number best refers to the number of
Answer:
Mass number
Explanation:
what is the average distance between the sun and earth in summer and winter
Answer:
93,000,000 miles (8.5 light minutes)
Explanation:
In the northern hemisphere's winter, the earth is slightly closer to the sun than in the southern hemisphere's winter season
What is the correct order of increasing elec-
tronegativity?
1. Si, P, S, C, N, O, F
2. O, C, N, S, P, Si, F
3. F, Si, P, S, N, C, O
4. F, O, N, C, S, P, Si
Answer:
ceo que3
Explanation:
What is the significance of an electronegativity difference of 1.7 between 2
atoms?
O A. It tells which atoms form positive ions and which atoms form
negative ions.
OB. It represents the boundary between what is considered to be an
ionic or a covalent bond.
C. It determines if the 2 atoms will react to form a molecule.
D. It identifies which metal atoms will join together to form metallic
bonds
Am
B. It represents the boundary between what is considered to be an ionic or a covalent bond.
Further explanationElectronegativity is the ability of atoms to attract electrons, especially in covalent bonds (sharing of electron pairs)
In a periodic system, electronegativity increases in a group, from bottom to top, and in a period from left to right.
From this difference in electronegativity, we can determine the ionic compound, polar or non-polar
Pauling determined the electronegativity scale (based on bond energies), between 0.7 - 4 (Fluorine has the highest number of electronegativities: 4)
Polar covalent compounds have a large electronegativity difference, while nonpolar compounds have a small electronegativity difference.
We can use the difference in electronegativity between the 2 bonded atoms to determine their polarity
<0.5: covalent non polar 0.5- 1.7: covalent polar > 1.7 : ionExample
H₂OH = 2.1
O = 3.5
H₂O = 3.5-2.1 = 1.4 >> polar
O₂= 3.5-3.5 = 0 >> non polar
Which RNA strand would match with this DNA strand?
AGGCTAAT
What is the DNA strand? You have not named it.
Which of the following elements has the lowest electronegativity?
A. Barium
B. Magnesium
C. Strontium
D. Calcium
Answer:
A. Barium
Explanation:
hope this helps! :)
Once upon a time, Walter the water molecule was traveling around Linda's blood. He was enjoying moving around wherever he wanted. One day, Walter decided to visit some cells. He traveled in and out of the cells as he pleased. Walter decided that he liked the cells so much that he wanted to stay inside and rest in the vacuole. However, as the day went on, Walter felt a change happening around him. Linda had eaten some VERY salty popcorn. Walter LOVED Sally the salt molecule and felt a magnetic attraction to her. The closer the salt came to the cell, the quicker Walter's love for Sally pulled him out of the cell and towards the salt.
Answer:
This story that is related to the movement of water in relation to the amount of solute seeks to explain the process of OSMOSIS in a very interesting way.
Explanation:
The OSMOSIS process is a process where water diffuses from a compartment with fewer solutes to one with higher solutes, that is why the osmotic intention is to balance the concentrations and molarities between both compartments, this is called osmotic balance.
For this to happen, a highly water-permeable barrier is needed.
The boiling of soy oil determined by a student in the laboratory turned out to be 319.5 oC. The accepted value of this melting point is 300 oC. What is the percent error in this reading?
Answer:
Percent error = 6.5%
Explanation:
Given data:
Measured value = 319.5°C
Accepted value = 300°C
Percent error = ?
Solution:
Formula:
Percent error = measured value - actual value / actual value × 100
Now we will put the values in formula.
Percent error = 319.5°C - 300°C/300°C × 100
Percent error = 19.5 °C /300°C × 100
Percent error = 0.065× 100
Percent error = 6.5%
please hurry i’m taking a test
Answer:
im pretty sure its move at a constant rate to the right
True or false
Each family represents the number of energy levels present in an atom of the element.
Answer:
true because of the elements
what causes the tides
Answer:
Gravity causes tides
Explanation:
(Please try to answer my most recent question!!!!!)
A helium-filled balloon is released into the atmosphere. As the balloon rises, which
would MOST likely increase and cause the balloon to burst?
O the volume of the helium
O the mass of the helium
o the temperature of the helium
O the density of the helium
Why are chromosomes not always visible?
a.
They are often very loosely coiled in strands of chromatin
c.
They lose pigment in sunlight
b.
They are wound very tightly
d.
They are often behind the nuclear envelope
Answer:
why are chromosomes not always visible? I'm going with a
Theorists try to find ways to explain human behavior in rational ways. It seems irrational to break rules, if we want to maintain social order. We are largely constrained by the rules and obliged to behave in a particular way or to avoid certain behaviors. What motivates people to break social rules? Do you think powerful and famous people tend to break more rules? Is it worth breaking these rules? No Response(s) Be the first to respond to the Discussion topic!
Answer:
See explanation
Explanation:
According to Burgess (1996); 'We don't break rules because it 'doesn't feel right' to do so. Some elements of personality can determine whether we will break rules or not, particularly when the moral/social-conventional distinction is taken into consideration'.
If an individual has the urge to behave in a manner that transgresses social rules, personality characteristics now come into play here. Personality traits determines whether the individual considers him/herself as bound by the rules. Some people will follow the rules absolutely while some only follow rules that they consider important, a small proportion will not follow any rule that prevents them from achieving their set objectives.
Famous people become carried away with affluence and position and tend to break more rules since they believe that they will always get away with it because of whom they are.
Irrespective of the circumstances, it is never worth it to break a rule. We always have to see ourselves as bound by rules as part of our social responsibility.
What is the specific heat of a metal if the temperature of a 12.5 g sample increases from 19.5 C to 33.6 C when it absorbs 37.7 J of heat.
Answer:
0.213 J/g°C
Explanation:
To calculate specific heat of the metal, the formula is used:
Q = m × c × ∆T
Where Q = amount of heat
m = mass
c = specific heat
∆T = change in temperature
According to this question, Q = 37.7 J, m= 12.5 g, initial temperature= 19.5 °C, final temperature = 33.6°C, c=?
Q = m × c × ∆T
37.7 = 12.5 × c × (33.6-19.5)
37.7 = 12.5c × 14.1
37.7 = 176.25c
c = 37.7/176.25
c = 0.2139
Hence, the specific heat of the metal is 0.213 J/g°C
Please can I have help on these two questions I’ll be very grateful!!!!!!
Answer:
-1 IS THE CHARGE OF ELECTRON AS THEY ARE NEGATIVE
MARK ME AS BRAINLIEST IF U FOUND IT HELPFUL
What suprising result is explained using this model
Answer:
B. A few positive particles bounced back because they were pushed away from the positive center.
Explanation:
The result of the experiment conducted by Rutherford shows that a few positive particles bounced back because they were pushed away from the positive center.
This is the central theme of Rutherford's experiment on a thin gold foil.
In 1911, Rutherford performed the gold foil experiment that gave the modeling of the atomic structure a great boost. He bombarded a thin gold foil with alpha particles. He discovered that most of the alpha particles passed through the foil while a few of them were deflected back. This led him to postulate that an atom has a small positively charged center where nearly all the mass is concentrated.Which best explains what happens during crossing over?
The chromosomes have electrical connections that allow them to line up randomly.
Paired chromosomes overlap and portions of DNA switch between chromosome.
Genetic material is switched because the chromosomes line up independently.
Chromosomes line up randomly and cross genetic information between unpaired chromosomes.
Answer:
Chromosomes line up randomly and cross genetic information between unpaired chromosomes.
Explanation:
Answer:
d.
Explanation:i took the quiz on edge 2020
Please help brainiest is award!
Answer: A.
Explanation:
The molecular formula for glucose is C6H12O6. This means that there are 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms bonded together to make one molecule of glucose.
Hopes this helps!
d.
both a
5. It dissolves more substances than any other?
a. sugar
b. salt
c. water
d. pebble
salt
Explanation:
I hope this answer is right
combined aggregation of minerals
Answer:
Rocks
Explanation:
The combined aggregation of minerals are called rocks. There are three types of rocks Igneous Rocks, sedimentary rock, and metamorphic rocks.
Rocks are formed due to the repetitive, orderly, geometrical internal arrangement of minerals. Minerals undergo several processes such as weathering, crystallization, erosion, and sedimentation to form rocks.
Hence, the combined aggregation of minerals is called rocks.
How do cells use lipids and carbohydrates?
Answer:
Animals tend to use carbohydrates primarily for short-term energy storage, while lipids are used more for long-term energy storage. Carbohydrates are stored as glycogen in animals while lipids are stored as fats (in plants carbohydrates are stored as cellulose and lipids as oils)
Explanation:
hope this helps!
Answer:
Explanation:
Animals tend to use carbohydrates primarily for short-term energy storage, while lipids are used more for long-term energy storage. Carbohydrates are stored as glycogen in animals while lipids are stored as fats (in plants carbohydrates are stored as cellulose and lipids as oils)
Select the measurement with that represents the least amount of pressure.
Select one:
a. 3 atm
b. 3.039 x 1013 Pa
c. 2.280 x 10^3 mm Hg
d. 40 psi
Answer:
a 3atm
Explanation:
or d 40 psi because it is true and corect [b 3.0398 21oinwex id cn uerfh uh 837hf uxhoec
What is the correct name for the compound P406?
A. Phosphoric acid
B. Tetraphosphorus hexoxide
C. Phosphorus (IV) oxide
D. Phosphorus oxide
Answer:
Phosphorus trioxide
Explanation:
Answer:
Tetraphosphorus hexoxide
Explanation:
Give brainliest please