Using the Ideal Gas Law equation: [tex]PV=nRT[/tex]
P = pressure (kPa)V = volume (L)n = moles (mol)R = gas constant( [tex]\frac{kPaL}{molK}[/tex])T = Temperature (K)STP also known as Standard Temperature and Pressure is a set of conditions at sea level
At STP:
P = 101.3 kPa
T = [tex]0^o C[/tex] or 273 K
[tex]n=\frac{PV}{RT}[/tex]
[tex]n=\frac{101.3kPa)(3.7L)}{(8.31\frac{kPaL}{molK})(273K)}[/tex]
[tex]n = 0.16 mol[/tex]
river system smallest to largest
As stated, the Tributary, River, and River system are in order of largest to smallest.
What is the short definition of a river?A river is a part of the ocean that resembles a ribbon and flows downward under the influence of gravity. A river may be both large and deep or it may be only shallow enough to wade over. A stream, watercourse, or brook is a streaming water source that is lower than a river.
What is a river metaphor?The river flows through the landscape like a silver ribbon. The fast flowing river plunders everything in its path. The river is a seal that is attempting to return toward the tidal ways. A grizzly bear is the river, leaping to get its prey.
To know more about River visit:
https://brainly.com/question/17083829
#SPJ1
The complete question is-
Place the following in order from smallest to largest.
River, River system, Tributary.
How many moles is 1.5 x10 20?
2.49 x [tex]10^{-4}[/tex] moles is equal to 1.5×[tex]10^{20}[/tex]. The number of moles is equal to the number of molecules divided by Avogadro's number, 6.022×[tex]10^{23}[/tex].
This means that 1.5×[tex]10^{20}[/tex]moles are equal to
1.5×[tex]10^{20}[/tex]/6.022×[tex]10^{23}[/tex]
0.24908×[tex]10^{-3}[/tex]
2.49 x [tex]10^{-4}[/tex] moles.
Avogadro's number: Avogadro's number is a constant used in chemistry to represent the number of atoms or molecules in a mole of a substance. It is equal to 6.022 x [tex]10^{23}[/tex]. Or we can say that Avogadro's number is, the number of units in one mole of any substance (defined as its molecular weight in grams), equal to 6.02214076 × 1023. The units may be electrons, atoms, ions, or molecules, depending on the nature of the substance and the character of the reaction.
Learn more about moles:
https://brainly.com/question/28037816
#SPJ4
What is the name of an isotope that has 14 protons and 14 neutrons?
The name of an isotope that has 14 protons and 14 neutrons is Silicon-28
The total number of protons and neutrons in an isotope's nucleus is referred to as the mass number. This is due to the fact that each proton and neutron has a mass of one atomic mass unit.
We may get the mass of the atom by multiplying the total number of protons and neutrons by 1 amu.
The atomic number Z is 14 if there are 14 protons. Z being the quantity of large positively charged nuclear particles by definition.
Silicon is what we have if Z is the atom's identity and Z=14. The isotope of the element is 28S because the element may contain more or fewer neutrons than Z, where neutrons are heavy, neutrally charged nuclear particles.
Silicon-28 is the isotope with 14 protons and 14 neutrons.
Learn more about neutron at brainly.com/question/29248303
#SPJ4
What are two characteristics of the rock found 3 mya?
To solve this we must be knowing each and every concept related to rock and its characteristics. Therefore, the two characteristics of the rock can be given as below.
What is rock?The word rock relates to the material's bulk volume, which includes the grain or crystals in addition to the enclosed vacuum space.
The two characteristics of the rock are:
Some minerals exhibit color features related to mineral composition and atom arrangement: for example, magnetite is black, chlorite is green, and pyrite is brassy yellow.
The capacity of a mineral to resist scratching is used to estimate its hardness, which is generally determined on fresh material. When a mineral is scraped with a knife, it softens. If a knife cannot scratch it, the two have equivalent hardness or even the mineral is harder.
Therefore, the two characteristics of the rock can be given as above.
To learn more about rock, here:
https://brainly.com/question/13498906
#SPJ1
What is the priority nursing intervention for a patient who experienced a chemical burn injury?
Respiratory and fluid status are primary nursing interventions for patients with chemical burns.
When treating, make sure that the causative agent is completely removed. Remove contaminated clothing and jewelry and use the shower if necessary to wash off the chemicals for at least 20 minutes. Protect your eyes from chemical contamination. Cover the burn with a clean bandage.
During the first few days after a burn, check your peripheral pulse frequently for restricted blood flow. Carefully monitor hourly fluid intake and urine output, as well as blood pressure and heart rate. Any changes should be reported immediately to the burn surgeon.
Learn more about peripheral pulse visit:
brainly.com/question/8751059
#SPJ4
An ideal gas (which is is a hypothetical gas that conforms to the laws governing gas behavior) confined to a container with a massless piston at the top. (Figure 2) A massless wire is attached to the piston. When an external pressure of 2.00 atm is applied to the wire, the gas compresses from 6.40 to 3.20 L . When the external pressure is increased to 2.50 atm , the gas further compresses from 3.20 to 2.56 L .
In a separate experiment with the same initial conditions, a pressure of 2.50 atm was applied to the ideal gas, decreasing its volume from 6.40 to 2.56 L in one step.
If the final temperature was the same for both processes, what is the difference between q for the two-step process and q for the one-step process in joules?
Answer: -162,120J
Explanation:
Okay, so q stands for work, given by the formula q = -P∆V,
For the first round, we have 2atm (for P) and a volume change of 3.2 (6.4-3.2) for the first experiment.
Find the work: q = -2 • (3.2 - 6.4) = 6.4L/atm
For the second experiment, it is now 2.5atm, with the change in volume going from 3.2 to 2.56.
So, work is q = -2.5(2.5 - 3.20) = 1.6L/atm
Add the total work: 1.6 + 6.4 = 8L/atm
To find the Joules per L/atm, recall that a mol of gas in K is 8.31447J, while the gas constant where a liter of gas per mol in K is 0.08206L/atmK. Divide these two values, which leaves us with 101,325J
So, for the first round, multiply 8 x 101,325, which leaves us with 810,600J.
Second round: The pressure is 2.5atm, with the volume change from 6.40 to 2.56
Solve for work: q = -2.5(2.56-6.4) = 9.6L/atm
Multiply with the Joule unit found earlier: 9.6 x 101,325 = 972,720J.
To find the difference, subtract the value of the single-step process (second round) from the first round (multistep)
810600 - 972720 = -162,120J. Therefore, it takes more heat to do the single step than the multistep process.
Among the following radioactive parent isotopes, which has the shortest half-life?A) uranium-238B) potassium-40C) rubidium-87D) carbon-14
The half-life of a radioactive isotope is the time it takes for half of the original number of atoms in a sample to decay.
The isotope with the shortest half-life among the given options is:
D) carbon-14
The half-life of carbon-14 is 5,730 years which is shorter than the other isotopes. Uranium-238 has a half-life of 4.5 billion years, potassium-40 has a half-life of 1.25 billion years and rubidium-87 has a half-life of 49.8 billion years, all are greater than the half-life of carbon-14.
So, carbon-14 is the isotope with the shortest half-life among the given options.
It is important to note that the half-life of an isotope is a constant property of the isotope. For example, the half-life of carbon-14 is always 5,730 years and does not change with the amount of carbon-14 present or any other factors.
Learn more about Half-life reactions here: https://brainly.com/question/29604077
#SPJ4
Why is it that some materials made up of entirely nonmetal atoms are soluble in water while some are not
some materials made up of entirely nonmetal atoms are soluble in water while some are not Due to different combinations of pairs created, which might either dissolve extremely well, or not dissolve whatsoever
The solubility of a substance in water depends on the nature of the chemical interactions between the substance and the water molecules. Some materials made up of entirely nonmetal atoms are soluble in water because they can form hydrogen bonds with the water molecules. These materials are called polar solvents and are typically composed of polar molecules, like those found in many organic compounds. For example, ethanol (C2H5OH) is a polar solvent that is composed of entirely nonmetal atoms and is soluble in water because it can form hydrogen bonds with the water molecules.On the other hand, some materials composed of entirely nonmetal atoms are not soluble in water because they do not form hydrogen bonds with the water molecules. These materials are called non-polar solvents and are typically composed of non-polar molecules, like those found in many hydrocarbons.
Learn more about hydrogen bond here:
https://brainly.com/question/15099999
#SPJ4
Help please brainliest, I promise
According to the stoichiometry of the given chemical equation,2.66 moles of aluminium oxide are formed when 4 moles of oxygen reacts.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
As 3 moles of oxygen gives 2 moles of aluminium oxide, thus, 4 moles of oxygen will give 4×2/3=2.66 moles.
Thus, 2.66 moles of aluminium oxide are formed when 4 moles of oxygen reacts.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
The boiling point of acetone is 50.5°C, while the boiling point of water is 100°C. Bringing a solution made of water and acetone to which of the following temperatures would allow the separation of these two liquids?
The temperature must be greater than 50.5°C and less than 100°C.
What is temperature ?
Temperature is a physical property that is used to measure the average kinetic energy of particles in a system, such as a gas, liquid, or solid. It is measured in units of degrees on the Celsius, Fahrenheit, or Kelvin scales.
Temperature is related to the average kinetic energy of particles in the system, and is affected by the number of particles, their mass, and the strength of their interactions.
Which temperature range is typical?
Core temperature is 98.6 F on average (37 C). However, the average body temperature might be anywhere from 97 F (36.1 C) to 99 F (37.2 C) or higher. Depending on the period of year or how busy you are, your body temperature may change. In general, elderly people's temperature are lower than those of younger people.
To learn about more temperature.
brainly.com/question/25677592
#SPJ1
0.23 g of a sample of common salt contained 0.1518 g of chlorine .show that these results are in agreement with the law of constant proportion
To solve this we must be knowing each and every concept related to Law of constant proportion. Therefore, the results are in agreement with the law of constant proportion.
What is Law of constant proportion?Chemical compounds are composed of components that are present in a set ratio by mass, according to the Law of Constant Proportion. The Proust law or Law of Definite Proportions is another name for the Law of Constant Proportion. NaCl will continue to have a 1:1 mass ratio.
mass of NaCl = mass of Cl + mass of Na
0.25 g= 0.1518 gm+ mass of Na
mass of Na = 0.0982 gm.
ratio of 1st sample= mass of Cl /mass of Na
= 0.1518 gm/ 0.0982
=1.54
In the second sample, NaCl weighs 0.24 g, Cl weighs 0.1458 g and Na weighs 0.0942 g.
ratio of 2nd sample is = 0.1458 g/0.0942 g.
=1.54
Therefore, the results are in agreement with the law of constant proportion.
To learn more about Therefore, the results are in agreement with the law of constant proportion., here:
https://brainly.com/question/20696665
#SPJ1
A sealed, insulated calorimeter contains water at 310 K. The surrounding air temperature is 298 K, and the water inside the calorimeter remains at 310 K two hours later. What type of system does the calorimeter attempt to model
There is no heat exchange with the environment since the calorimeter is insulated. This may be demonstrated by saying: Since the calorimeter is a fixed unit, it follows that its heat capacity likewise has a fixed value.
Calorimeters are the tools used to measure the amount of heat. The definitions of heat and temperature, the quantity of heat absorbed to raise a body's temperature, the distinction between heat and temperature, and specific heat capacity are among the fundamental ideas presented in this chapter. A chemical reaction's associated thermal energy change is what causes a calorimeter's temperature to fluctuate. If the calorimeter absorbs heat (q calorimeter > 0) and its temperature rises, the reaction is producing heat (q rxn 0).
To learn more about capacity please click on below link
https://brainly.com/question/15158174
#SPJ4
world production of ammonia is now about 30 times greater than it was in 1950 suggest why the demand for ammonia is increased
There are a few reasons why the demand for ammonia has increased over time:
Population growth: The world's population has grown significantly over the past 70 years, and as the population has grown, so has the demand for food. Ammonia is a key ingredient in the production of fertilizers, which are used to help grow crops and increase food production. As the population has increased, so has the demand for fertilizers, which has contributed to the increase in the production of ammonia.Industrialization: As more countries have industrialized and developed, there has been an increased demand for ammonia to use as a feedstock in the production of chemicals, plastics, and other industrial products.Energy production: Ammonia can be used as a source of renewable energy, and there has been an increased demand for clean energy sources in recent years. This has led to an increase in the production of ammonia for use in energy production.Environmental concerns: Ammonia can be used to reduce greenhouse gas emissions, and there has been an increased focus on finding ways to reduce environmental impact. This has led to an increase in the production of ammonia for use in environmental applications.Hope This Helps You!
how many liters of a 60% acid solution must be mixed with a 15% acid solution to get 360 L of a 50% acid solution
x + (360 - x) = 360 * 0.50
where x is the amount of the 60% acid solution.
Solving for x, we get: x = 360 * 0.50 - 360 x = 180
Therefore, you will need to mix 180 L of the 60% acid solution with 180 L of the 15% acid solution to get 360 L of a 50% acid solution.
What is acid?Acid is a substance that has a pH level of lower than 7.0 and is capable of corroding or dissolving other substances. It is usually found in aqueous solutions and is a highly reactive substance. Examples of acid include sulfuric acid, hydrochloric acid, nitric acid and acetic acid. These are used in a variety of industries such as food production, industrial cleaning and chemical engineering.
To learn more about acid
https://brainly.com/question/26855500
#SPJ4
Iron undergoes a synthesis reaction to form Iron (III) Oxide when it is heated in air.
Write the balanced chemical equation for this reaction. [2]
4 Fe(s) + 3 02(g) - 2 Fez03(s)
(Complete)
What amount of iron reacts with 15 mol of oxygen? [3]
What amount of iron (III) oxide is produced? [3]
If 4.60 g of iron (III) oxide is produced, what mass of iron is reacted? [3]
Ferric oxide, is the product that is formed when iron undergoes oxidation
What is the Reaction?Upon reacting with oxygen, iron will be oxidized to either the +3 oxidation state in iron (III) oxide, or to a combination of the +2 and +3 oxidation states in iron (II, III) oxide.The balanced chemical equations for these reactions look like this
#4”Fe”_text((s]) + 3”O”_text(2(g]) -> 2”Fe”””_2”O”_text(3(s])#
And
#3”Fe”_text((s]) + 2”O”_text(2(g]) -> “Fe”””_3”O”_text(4(s])#
The first compound, iron (III) oxide, also called ferric oxide, is dark red/brown in color
While the second compound, iron (II, III) oxide, also called ferrous ferric oxide, is dark brown/black in color.The [Fe(H2O)6]3+ ion is colorless (or pale pink), but many solutions containing this ion are yellow or amber-colored because of hydrolysis.
To learn more about chemical equation to refer:
https://brainly.com/question/30087623
#SPJ1
What is the mass in grams of 1.56 moles of aspartame?
459.1 g of aspartame has a 1.56 moles of aspartame.
Artificial sweetener aspartame is potent and low in calories. About 200 times sweeter than sugar, it is a white, odourless powder. It is legal to use in Europe as a tabletop sweetener, an energy-reducing food ingredient in beverages, desserts, and sweets, dairy products, chewing gum, and other foods.
Aspartame is a dipeptide that is created through the formal condensation of the amino group of methyl L-phenylalaninate with the alpha-carboxy group of L-aspartic acid.
Here, aspartame has 1.56 moles.
Molar mass of aspartame = 294.40 g/mol
So, Number of moles of aspartame = [tex]\frac{Given Mass}{Molar Mass}[/tex]
Mass of aspartame = Number of moles × Molar mass
or, mass = 1.56 × 294.3
or, mass = 459.1 g
Hence, Mass of aspartame of 1.56 moles of aspartame is 459.1 g.
To know more about aspartame from the link
brainly.com/question/10361394
#SPJ4
A calibrated flask was filled to the 25.00 mL mark with ethyl alcohol. By weighing the flask before and after adding the alcohol, it was determined that the flask contained 19.7325 g of alcohol. In a second experiment, 25.1060 g of metal beads were added to the flask, and the flask was again filled to the 25.00 mL mark with ethyl alcohol . The total mass of the metal plus alcohol in the flask was determined to be 38.6794 g.
The density of the metal beads, given that total mass of the metal plus alcohol in the flask was determined to be 38.6794 g is 3.22 g/mL
How do I determine the density of the metal beads?We'll begin by obtaining the density of the alcohol in the flask with the metal beads. This is illustrated below:
Mass of alcohol = 19.7325 gVolume of alcohol = 25 mLDensity = ?Density = mass / volume
Density of alcohol = 19.7325 / 25
Density of alcohol = 0.7893 g/mL
Next, we shall determine the volume of the alcohol in the 25 mL flask. This can be obtained as follow:
Density of alcohol = 0.7893 g/mLMass of metal beat = 25.1060 gTotal mass of metal beat and alcohol = 38.6794 gMass of alcohol in flask = 38.6794 - 25.1060 = 13.5734 gVolume of alcohol in flask =?Volume = mass / density
Volume of alcohol in flask = 13.5734 / 0.7893
Volume of alcohol in flask = 17.2 mL
Finally, we shall determine the density of the metal beads. Details below:
Mass of metal beat = 25.1060 gVolume of alcohol in flask = 17.2 mLVolume of flask = 25 mLVolume of metal beads = 25 - 17.2 = 7.8 mLDensity of metal beads =?Density = mass / volume
Density of metal beads = 25.1060 / 7.8
Density of metal beads = 3.22 g/mL
Thus, we can conclude that the density of the metal beads is 3.22 g/mL
Learn more about density:
https://brainly.com/question/952755
#SPJ1
Complete question:
A calibrated flask was filled to the 25.00 mL mark with ethyl alcohol. By weighing the flask before and after adding the alcohol, it was determined that the flask contained 19.7325 g of alcohol. In a second experiment, 25.1060 g of metal beads were added to the flask, and the flask was again filled to the 25.00 mL mark with ethyl alcohol . The total mass of the metal plus alcohol in the flask was determined to be 38.6794 g. What is the density of the metal in g/mL?
The two elements that are frequently used for making transistors are
A. boron and aluminium
B. silicon and germanium
C. iridium and tungsten
D. niobium and columbium
The two elements that are frequently used for making transistors are niobium and columbium.
What is an element?It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
Learn more about elements,here:
https://brainly.com/question/14347616
#SPJ1
Frida wants to measure the volume of a stone. She starts by pouring 473 mL of water into a large measuring cup. Then she drops in the stone. Now the water measures 499 mL. What is the volume of the stone
Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. the volume of the stone is 26 cm³.
Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. She fills a measuring cup with 473 mL of water and drops the stone in, causing the water level to rise to 499 mL. Using the conversion factor that 1 mL = 1 cm³, the initial volume of water is 473 cm³ and the final volume of water is 499 cm³. By applying the equation [Volume of stone] + [Initial water volume] = [Final water volume],
substituting the values
⇒ xcm3 +473cm3 = 499cm3
xcm3 =499cm3 −473cm3
xcm3 =26cm cube
the volume of the stone can be determined to be 26 cm³.
Learn more about conversion factor here:
https://brainly.com/question/28366871
#SPJ4
Which of the following properties of covalent compounds are influenced by ionic character?
a. melting point
b. boiling point
c. viscosity
d. all of the above
The property of the covalent compound that is influenced by ionic character is boiling point. Option B
What is the ionic character?We know that for compounds, the kind of bonds that they have are usually neither here nor there. The bonds would have an ionic character and also a given amount of the covalent character.
We must note that the ionic character of a bond is very important when we discuss intermolecular interactions and they do affect the boiling points of the substances very much.
Learn more about boiling point:https://brainly.com/question/2153588
#SPJ1
A compound is found to contain 59.94 % carbon, 13.44 % hydrogen, and 26.62 % oxygen by mass. What is the empirical formula for this compound
The empirical formula for this compound containing 59.94 % carbon, 13.44 % hydrogen, and 26.62 % oxygen by mass is C3H8CO.
Given the % of carbon = 59.94%
The % of hydrogen = 13.44%
The % of oxygen = 26.62%
If a percentage is provided, we will assume that the entire mass is 100 grams. As a result, each element's mass is equal to the percentage indicated. Then
the mass of carbon (m1) = 59.94g
The mass of hydrogen (m2) = 13.44g
The mass of oxygen (m3) = 26.62g
We know the molar mass of C = 12 g/mole
The Molar mass of H = 1 g/mole
The Molar mass of O = 16 g/mole
The moles of carbon = 59.94/12 = 4.995
The moles of hydrogen = 13.44/1 = 13.44
The moles of oxygen = 26.62/16 = 1.664
Divide each mole value by the lowest computed mole number to get the mole ratio.
For C = 4.995/1.664 = 3 , For H = 13.44/1.664 = 8 and For O = 1.664/1.664 = 1. Then the empirical formula = C3H8CO
To learn more about hydrogen click here https://brainly.com/question/11837837
#SPJ4
What information does the percent composition of an atom in
a molecule give?
The relative number of atoms one element
contributes to a molecule
B. The total number of atoms of that element in a molecule
• C. The total mass that element contributes to a molecule a
O
D. The relative amount of mass an atom contributes to
a molecule
Answer:
I think Option no D is the suitable answer
What element has the largest radius?
Answer:
Francium
Hope this helps :)
How does thermal energy flow between a hot or cold pack and the atmosphere?
A. Both hot and cold packs absorb energy from the atmosphere.
B. Hot packs release energy into the atmosphere and cold packs absorb energy from the atmosphere.
C. Both hot and cold packs release energy from the atmosphere.
D. Hot packs absorb energy from the atmosphere and cold packs release energy into the atmosphere
Thermal energy flow between a hot or cold pack and the atmosphere by the D. Hot packs absorb energy from the atmosphere and cold packs release energy into the atmosphere.
When a hot pack is applied to the skin, the heat energy stored inside the pack is transferred to the skin, by conduction, and the heat energy is absorbed by the skin. Cold packs work in the opposite way, the cold energy stored inside the pack is transferred to the skin and released into the atmosphere.
The heat energy is conducted out of the pack and then radiated out into the atmosphere in the case of a cold pack, and The heat energy is conducted into the pack and then radiated out into the atmosphere in the case of a hot pack.
Learn more about thermal energy flow here: https://brainly.com/question/4820001
#SPJ4
A compound is composed of carbon and hydrogen and has an empirical
formula of CH. The molar mass of the compound is experimentally
determined to be 78.12 g/mol. What is the molecular formula for the
compound?
The supplied statement indicates that the compound's molecular formula is (CH)ₙ = CH₆ = C₆H₆
What is the purpose of hydrogen?Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is now most widely employed are urea manufacturing and petroleum refining, with the developing markets of utilities and transportation.
Briefing:The lowest half figure ratio of a compound is revealed by the empirical formula for that molecule.
Empirical weight formula: 12 + 1 Equals 13.
Molecular weight = 78
n = Molecular weight/Empirical formula weight
n = 78.12/13
n = 6.00
Molecular formula = (CH)ₙ = CH₆ = C₆H₆
To know more about Hydrogen visit:
https://brainly.com/question/24433860
#SPJ1
Does a meter stick measure distance?
Inside the metric system, length as well as distance were two of the most significant metrics. Measurement of length and distance can be done in a variety of ways.
Using a metre stick is among the most popular methods for gauging these amounts.
A meterstick, meterstick, nor yardstick consists of either a straightedge as well as foldable ruler was using to measure length, and therefore is notably common inside the construction business. They frequently consist of wood as well as plastic, and their joints frequently consist of plastic as well as metal to allow for folding.
A metre stick is a highly helpful tool in science that is exactly one metre long. A metre stick can be used to gauge items and distances that are both less than as well as longer than one metre.
To know more about metre stick
https://brainly.com/question/13399673
#SPJ4
In what part of this system are the two energy outputs found?
The part of the system that has two outputs of energy is the bulb.
What is the energy transformation?We would have to recall that on the basis of the first law of thermodynamics, it can be said that energy can not be created nor destroyed but that energy would have to be converted from one form to the other.
In this case, we can see that as the boy is cycling, there is the conversion of the mechanical energy of the boy to the heat and the light energy of the bulb as shown. These are the outputs referred to above.
Learn more about energy:https://brainly.com/question/1932868
#SPJ1
How does glycolysis make 32 ATP?
Both anaerobic and aerobic conditions can result in glycolysis. Pyruvate joins the citric acid cycle under aerobic conditions and proceeds through oxidative phosphorylation, which results in the net synthesis of 32 ATP molecules.
What is an example of anaerobic activity?Anaerobic exercises require small bursts of energy and are finished rapidly while exerting maximum effort. Examples include jumping, jogging, and hard weightlifting. Your breathing and heart rate alter as you engage in aerobic vs anaerobic activities. During aerobic workouts, oxygen is your major source of energy.
What exactly does it mean to be anaerobic?Anaerobic means "without oxygen," whereas aerobic indicates the existence of oxygen. Both are important for your overall health since they put your body through different difficulties. Anaerobic exercise consists of short bursts of high-intensity activity that do not demand your body to consume oxygen as it would during cardio (or aerobic) exercise.
Here,
Glycolysis can occur under both anaerobic and aerobic settings. Under aerobic circumstances, pyruvate enters the citric acid cycle and goes through oxidative phosphorylation, resulting in the net production of 32 ATP molecules.
To know more about anaerobic respiration visit:
https://brainly.com/question/13515664
#SPJ4
In the lab, the dominant phenotype for sheep color is wool and the recessive phenotype for sheep color is wool
The dominant phenotype for sheep color is wool because it is the most common color seen in sheep.
What do you mean by Phenotype?
Phenotype is the physical, biochemical, and physiological characteristics of an organism, as determined by both genetic makeup and environmental influences. It is the physical expression of an organism's genes, and can be seen in its morphology, development, and behavior.
Wool is usually white or off-white in color and is the result of a dominant gene. The recessive phenotype for sheep color is non-wool, which is usually a darker color, such as black, brown, or gray. This is the result of a recessive gene and is less common than the dominant gene.
To know more about Phenotype,
https://brainly.com/question/902712
#SPJ4
Normal text Calibri
25) Look at the way the contour lines point or bend on the topographic map below. Match the blanks on
the map below using the terms "Upstream" or "Downstream" based on the direction the stream is
flowing.
Zo
1?
2.?
In the given bend on the topographic map, 1. is Downstream and 2. is Upstream.
What is Upstream and Downstream of the river?The stream can be described as the moving water in a river is called a stream. Upstream can be described as if the water is flowing in the opposite direction to the stream, it is known as upstream.
Downstream can be described as flowing along the direction of the stream, it is known as downstream.
Still water can be described as under this circumstance the water is stationary and the speed of the water is equal to zero.
All rivers flow downhill from higher elevations to lower elevations and perpendicular to the contour line. As a rule of thumb, the V-shaped contour is representing upstream.
Learn more about Upstream and Downstream, here:
https://brainly.com/question/11194433
#SPJ1