2 eggs cook in a frying pan, which is sitting over a gas burner. Is thermal energy being transferred from the metal pan to the eggs by radiation in this image? Why or why not?

Answers

Answer 1
Hope that helps have a good day though.
2 Eggs Cook In A Frying Pan, Which Is Sitting Over A Gas Burner. Is Thermal Energy Being Transferred
Answer 2

Answer:

No, the eggs are in direct contact with the metal pan, which is in direct contact with the gas flame, so this is conduction, not radiation

Reasons:
-Thermal energy is being transferred by conduction.

-Radiation transfers thermal energy by electromagnetic waves.

-Radiation does not transfer thermal energy by direct contact.

Radiation heat transfer is a process where heatwaves are emitted that may be absorbed, reflected, or transmitted through a colder "body". Sun heats the earth by electromagnetic waves. The sun does not come in physical contact with the Earth to transfer heat. (In my opinion, the Earth touching the sun would not be on my to-do list.)



Explanation:

Have a great rest of your day
#TheWizzer

2 Eggs Cook In A Frying Pan, Which Is Sitting Over A Gas Burner. Is Thermal Energy Being Transferred

Related Questions

Find the kinetic energy k of the block at the moment labeled b. express your answer in terms of k and a.

Answers

The position of the object can be used to find the kinetic energy in terms of k and a.

What is kinetic energy?

The term kinetic energy refers to the energy of an object that is in motion. The question is incomplete hence the syetem is not shown and the value of the kinetic energy can not be found in terms of  k and a.

Hence, when the system is shown, we can look at the position of the system and use it to obtain the value of the kinetic energy in terms of k and a.

Learn more about kinetic energy: https://brainly.com/question/12669551

Answer:

K = 3/8k(A)^2

Explanation: Potential Energy --> Conservation of Energy

Because block B is at A/2, U = 1/2k(A/2)^2 which equals U = 1/8k(A)^2.

Now that you have the equation for potential energy, you can find kinetic energy in terms of the spring constant (k) and amplitude (A).

K = 3/8 k A^2

Students in science are studying solutions and the dissolving rate of solids. One group was given some instant lemonade mix to dissolve. They used a packet of lemonade crystals and a packet of lemonade powder. The students dissolved the same amount of each solid into 100 ml of water. They varied the water temperature. List ALL the possible conclusions based the data the students collected?

Answers

Answer:

a-d

Explanation:

hope this helps

When a 10-V battery is connected to a resistor, 2 A of current flow in the resistor. What is the resistor's value

Answers

Hi there!

We can use Ohm's law to solve:
[tex]V = IR[/tex]

V = Potential Difference (V)
I = Current (A)
R = Resistance (Ω)

We can rearrange the equation to solve for resistance:

[tex]R = \frac{V}{I}[/tex]

Plug in the given values to solve.  

[tex]R = \frac{10}{2} = \boxed{5 \Omega}[/tex]

A block of mass 3. 0 kg is hung from a spring, causing it to stretch 12 cm at equilibrium, as shown above. The 3. 0 kg block is then replaced by a 4. 0 kg block, and the new block is released from the position shown above, at which the spring is unstretched. How far will the 4. 0 kg block fall before its direction is reversed?.

Answers

Answer: 32 cm

Explanation:

Which statement describes the force diagram? the forces are balanced. the box will move to the right. the box will move to the left. the forces are unbalanced.

Answers

The answer will be A The forces are balanced. Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction.

what is force?

Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.

The length of each arrow represents the magnitude of each force, while the direction of each arrow represents the direction of each force.

From the diagram, we see that the four arrows have all same length: this means that the four forces have same magnitude, therefore they are balanced in pair. In fact:

On the vertical direction, the normal reaction ([tex]F_N[/tex]) balances the weight of the box ([tex]F_g[/tex])

On the horizontal direction, the push ([tex]F_P[/tex]) balances the force of friction ([tex]F_f[/tex])

Hence the answer will be A. the forces are balanced.

To know more about Force follow

https://brainly.com/question/25239010

Answer:

A is your answer.

Explanation:

Good luck on your exam!

The amount of potential energy possessed by an elevated object is:.

Answers

...equal to the work done in lifting it.

Two metal spheres having charges of 4. 0 × 10–6 coulomb and 2. 0 × 10–5 coulomb, respectively, are brought into contact and then separated. After separation, the charge on each sphere is

Answers

Answer:

12*10^(-6) or 1.2*10^(-5)

Explanation:

if both of spheres are in same size.

q after = (q1+q2)/2 = ( (4.0 + 20.0)*10^(-6) )/2 = 12*10^(-6) or 1.2*10^(-5)

Your friend phred says ""i decided to make one of those online personality tests as a project in my psychology class. how hard can it be?"" part a: explain whether or not phred should use the following personality theories as a basis for his online personality test. • psychoanalytic perspective• humanistic theory• trait theory

Answers

Fredd must use the trait theory for the online personality tests because it is based on distinctive features.

What is the trait theory?

The trait theory is a model that states people have certain basic personality traits which are distinctive features.

The trait theory is always based on the strength of these basic human trait characteristics.

The trait theory is based on three types of features capable of being used to describe personality, which include stability, consistency and individual differences.

Learn more about the trait theory here:

https://brainly.com/question/4443909

You research your favorite topic: earthquakes. You build a tall LEGO building, and you want to know which type of motion is most damaging to your building. You discover in your research that side-to-side motion is the worst. You will place the building on a piece of wood and shake it for durations of 30 seconds, 60 seconds, and 90 seconds. You will try an up-and-down motion and side-to-side motion.

Answers

Answer:

If the Lego building is shaken side to side, it will withstand up to 60 seconds because front to back will cause the top of the building to collapse.


Infrared light and visible light are both waves on the electromagnetic spectrum. Identify two
other similarities between infrared and visible light.

Answers

Answer:

Both travel in straight line

How much energy does a pair of hair straighteners transfer every second

Answers

Answer:

It depends...

Explanation:

If you know how much watts the pair of hair straighteners use, you can use that as the energy every second. A normal flat iron for hair would be 300 watts, so we could say that it uses 300 jolts or watts of energy per second.

Please help me

Think about a time when you walked down an empty hallway
and heard the echo of your footsteps. Write what you think
caused the echo.

Answers

Answer:

Explanation:

There are a few conditions as mentioned:  "you walked down an empty hallway and heard the echo of your footsteps." So first thing is as you walk, your shoes touch the floor and make noises.  Those are sounds of your footsteps.  You are in a hallway so the sounds are trapped within the hallway.  It is empty so there is nothing like people who would block and absorb the sounds. With sounds bouncing around walls and floor of the hallway, they bounce back to the source: you. That is when you hear the echo of your footsteps.

A proton is moving south with a speed of 4500 m/s in a magnetic field of 5500 T directed into the page. Determine the magnitude and direction of the magnetic force on the charge.

a.3.96 x 10-12 N west
b.1.55 x 1026 west
c.1.55 x 1026 east
d.3.96 x 10-12 N east

Answers

Answer:

F = q V X B

V is south and B is into the page

The resultant vector is directed to the East

F = 1.6E-19 * 4.5E3 * 5.5E3 N = 3.96 N East

(Note q is negative for an electron producing a force in the opposite direction)

The particles that make up matter are ______, ions or molecules.

Answers

Answer:

Atoms.

Explanation:

Atoms are purely one bit of an element. Ions are positive or negative atoms. Molecules are not pure, they have other stuff with it.

What is the tension of the string if the cylinder has an acceleration of

Answers

In physics, the tension on a suspended object said to be equal to the weight of the object plus or minus the mass of the object times the acceleration acting on it.

~ ISS

Seismic waves do not travel along the Earth’s surface. Please select the best answer from the choices provided T F.

Answers

Seismic waves do not travel along the Earth’s surface. The statement is false.

what are seismic waves?

The seismic waves can be defined as the waves full of energy that travel through the Earth's layer, these waves are the result of earthquake.

They can further be divided into two types body wave and surface waves. The body waves travel in the interior of the Earth and the surface waves travel at the surface of the Earth.

The seismic waves can have an amplitude of few centimeters in large earthquake. They travel slower as compared to the body waves.

Hence Seismic waves do not travel along the Earth’s surface. The statement is false.

To know more about Seismic waves follow

https://brainly.com/question/6835759

Answer:

False

Explanation:

Ed 2022

A carrot has a mass of 69 grams and a volume of 150 cubic centimeters. Calculate its
density.

Answers

Answer:

As Per Provided Information

Mass of carrot 69 grams

Volume of carrot 150 cm³

we have been asked to determine the density of carrot .

Using Formulae

[tex] \bf \: Density = \cfrac{Mass \: of \: carrot}{Volume \: of \: carrot}[/tex]

Substituting the given value and let's solve it to determine the density of carrot.

[tex] \longrightarrow\sf \: Density = \cfrac{69}{150} \\ \\ \\ \longrightarrow\sf \: Density = \cancel\cfrac{69}{150} \\ \\ \\ \longrightarrow\sf \: Density =0.46 \: gm \: {cm}^{ - 3} [/tex]

Therefore,

Density of carrot is 0.46 gm/cm³

Different between :
Metalloids and alloys ​

Answers

Answer:

Alloys are just mixtures of metal and metalloids are metallic substances with properties of metal.

Answer:

metalloids are chemical elements that form substances that have properties of metals and non metals while alloys is a mixture of metals

A round tube weighs 30 lbs. If the tube is stood on end it pushes down on the floor with a pressure of
2 lbs/in?. How many square inches is the end of the tube?

Answers

Answer:

15in2

Explanation:

The diagram shows part of a radio antenna.The plastic tube protects the radio antenna from bad weather.Dust particles carried by the wind rub against the plastic tube.After some time, the dust particles cause the tube to become positively charged.State the property of plastic that allows it to become electrostatically charged.

Have a good day!! :>

HELP Due right now

A 1345-kg car moving east at 15.7m/s is struck by a 1923-kg car moving north. They stick together and move with a velocity of 14.5m / s at theta = 63.5 degrees Was the north-moving car exceeding the 20.1m / s speed limit?​

Answers

Answer:

so here the initial momentum was all in the X direction. This is Equalling the mass. I'm someone multiplied by visa one initial Equalling 1345 kilograms multiplied by 15.7 meters per second. This is Equalling 2.11 times 10 to the fourth kilograms meters per second. Now the car stick together and we can say that the final momentum is Equalling. I'm someone plus himself to multiplied by the final velocity. This is gonna be equal to 1345 kilograms plus 1900 23 kilograms. This is multiplied by 14 0.5 meters per second. And we find that the final month Thomas Equalling 4.74 times 10 to the fourth kilograms meters per second. Now the y component of the final momentum, we can say that he's sub final. Why would be equaling two 4.74 times 10 to the fourth kilograms meters per second? This would be equally rather multiplied by sign of 63.5 degrees. This is Equalling 4.24 times 10 to the fourth kilograms meters per second. By law, of the conservation of momentum. We can say that the Y component of the final momentum equals the why component of the initial momentum. This is equaling EMS up to visa to initial and be some to initial is found to be equal to the final. The white component of final momentum divided by the second cars mass and so this would be 4.24 times tend to the fourth kilograms meters per second, divided by M sub 2 1923 kilograms and this is giving us 22.0 meters per second. And of course this is greater than 20 whether 20.1 meters per second. And so we can say that yes, this car is exceeding the speed limit. 

Explanation:

mark me brainliest!!

What is the difference between a moon and a planet.

Answers

Answer:

A planet revolves around the Sun and a moon orbits a planet. Technically, the moon also orbits the Sun as it spins around its planet, but because it has its own sub-orbit of a planet scientists define it as a moon. All planets in our solar system, except for Mercury and Venus, have moons. Earth has one moon, Mars has two, Neptune has thirteen, Uranus has twenty-seven, Jupiter has sixty-six, and Saturn has sixty-two. Pluto, now classified as a dwarf planet, has five moons.

Control rods are used to slow down the reaction in the reactor core when the core becomes too hot. please select the best answer from the choices provided t f

Answers

In nuclear reactors, control rods are used because reactions that occur in a nuclear reactor are highly exothermic in nature.

What is a nuclear reactor?

A nuclear reactor is an apparatus or structure in which  radioactive material can be made to undergo a commanded, self-sufficient nuclear reaction with the resultant release of energy.

Therefore, when these control rods are infused in a nuclear reactor, than it absorbs the neutrons and helps to control the chain reaction. As a result, the rate of chain reaction gets in control.

Thus, we can conclude that the statement control rods are used to slow down the reaction in the reactor core when the core becomes too hot is a true statement.

Thus In nuclear reactors, control rods are used because reactions that occur in a nuclear reactor are highly exothermic in nature.

To know more about Nuclear reactor follow

https://brainly.com/question/24295936

Answer:

TRUE ( T )

Explanation:

Just took the test on edge

Two blocks each of mass m are attached to the ends of a massless rod

Answers

The net torque on this system is (ml2g-ml1g)k

What is Torque?

This refers to the type of force that causes rotation in objects which has mass and is a twisting force

Based on the complete question, we can see the given parameters:

The torque due to farther mass above the pivot is ml2gk

The torque due to nearer mass about the pivot is ml1gk

Therefore, the net torque is (ml2g-ml1g)k

Read more about torque here:
https://brainly.com/question/14839816

The net torque on this system in which two blocks each of mass m are attached to the ends of a massless rod, above pivot, is (ml₂g-ml_₁g)\hat k.

What is torque?

The torque of a body is the rate of change of angular momentum of the body. Torque is the product of moment of inertia and the angular acceleration.[tex]\tau =I\times \alpha[/tex][tex]\tau=mlg[/tex]

Here, (I) is the moment of inertia and (α) is the angular acceleration.

Two blocks each of the mass m are attached to the ends of a massless rod which pivots as shown in fig.

Initially, the rod is held in the horizontal position and then released. When, the mass was kept at farther to pivot, then the value of torque is,

[tex]\tau=ml_2g\hat k[/tex]

When, the mass was kept at nearer to pivot, then the value of torque is,

[tex]\tau=-ml_1g\hat k[/tex]

Thus, the net torque on this system above pivot is,

[tex]\tau=ml_2g\hat k+(-ml_2g\hat k)\\\tau=(ml_2g-ml_1g)\hat k[/tex]

Thus, the net torque on this system in which two blocks each of mass m are attached to the ends of a massless rod, above pivot is (ml₂g-ml_₁g)\hat k.

Learn more about the torque here;

https://brainly.com/question/25482609

#SPJ4

The question is in the attachment!!​

Answers

Explanation:

|F|= B/2

B/2 = √(A²+B²+2ABcosθ) ------(1)

Since the resultant of A and B is perpendicular to Vector A

tan90°= BSinθ/(A+BCosθ)

(A+BCosθ)=0

Cosθ=-A/B ----(2)

Using equation (1)

B/2 = √(A²+B²+2ABcosθ)

B/2 = √(A²+B²+2AB×-A/B)

B/2=√(A²+B²-2A²)

B/2=√(B²-A²)

B²/4=B²-A²

A²=B²-B²/4

A²=3B²/4

A=√3B/2

Using equation (2)

Cosθ=-A/B

Cosθ=-[√3B/2]/B

Cosθ=-√3/2

θ= cos^-1 (-√3/2)

θ= 150°

I will be giving the brainliest to whoever.What is the PERCENT efficiency if a computer is supplied with 500 J of energy and is able to convert 400 J to useful energy?
A. 0.8 %
B. 8 %
C. 80 %
D. 800 %

Answers

The computer will be 0.8 % efficient when 500 J is supplied (input) with 400 J converted (output)

If a number of coplanar forces acting on a particle are in equilibrium, then

Answers

Explanation:

Then the algebraic sum of the moment of all the forces about any point is equal to the moment of the resultant force about the same point

If a number of coplanar forces acting on a particle are in equilibrium. then the moment of their resultant is equal to the sum of their individual moment.

What is the law of moments?

If a number of co-planar forces operating on a particle are in equilibrium, the algebraic sum of their moments about any point equals the moment of their resultant force about the same point, according to the law of moments.

Hence If a number of coplanar forces acting on a particle are in equilibrium. then the moment of their resultant is equal to the sum of their individual moment.

To learn more about the law of moments refer to the link;

https://brainly.com/question/13735588

#SPJ4

Two equivalent sinusoidal waves travel toward each other on a spring they interfere. What if the waves traveling toward each other aren't sinusoidal but a series of pulses as seen in the picture? What effect does this have on the spring?

Answers

Answer:

Superposition would take place

Explanation:

The waves would interfere with one another either in the form of Constructive Interference or Destructive Interference.

Imagine a situation : If people could not see colours, then how would traffic lights work ? Design a traffic system that does not rely on colors.​

Answers

Answer:

position

Explanation:

Okay, so this already exists

Colorblind people use the position of the light

Red on top, yellow in middle, green on bottom

dont use me for points please i need help, (circuits for physics)

Answers

Answer:

B, A, A, B

Explanation:

Just trust me on this one.

If a train going 60 m/s hits the brakes, and it takes the train 85 seconds to stop, what is
the train's acceleration?

Answers

Question :-

If a Train going with 60 m/s Speed hits the Brakes, and takes 85 sec to stop. What is the Acceleration of the Train ?

Answer :-

Acceleration of Train is 0.70 m/s² .

Explanation :-

As per the provided information in the given question, we have been given that the Speed of the Train is 60 m/s . Time taken to stop the Train is 85 sec . And, we have been asked to calculate the Acceleration of the Train .

For calculating the Acceleration , we will use the Formula :-

[tex] \bigstar \: \: \: \boxed { \sf{ \: Acceleration \: = \: \dfrac{v \: - \: u}{t} \: }} \\ [/tex]

Where ,

V denotes to Final Velocity .U denotes to Initial Velocity .T denotes to Time Taken .

Therefore , by Substituting the given values in the above Formula :-

[tex] \dag \: \: \: \: \sf{Acceleration \: = \: \dfrac{Final \: Velocity \: - \: Initial \: Velocity}{Time} } \\ [/tex]

[tex] \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{0 \: - \: 60}{85} } \\ [/tex]

[tex] \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{60}{85} } \\ [/tex]

[tex] \longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 0.70 }} [/tex]

Hence :-

Acceleration = 0.70 m/s² .

[tex] \underline {\rule {210pt} {4pt}} [/tex]

Note :-

Kindly Scroll the Screen from Right to Left for Better View .

Answer:

Question :-

If a Train going with 60 m/s Speed hits the Brakes, and takes 85 sec to stop. What is the Acceleration of the Train ?

Answer :-

Acceleration of Train is 0.70 m/s² .

Explanation :-

As per the provided information in the given question, we have been given that the Speed of the Train is 60 m/s . Time taken to stop the Train is 85 sec . And, we have been asked to calculate the Acceleration of the Train .

For calculating the Acceleration , we will use the Formula :-

\begin{gathered} \bigstar \: \: \: \boxed { \sf{ \: Acceleration \: = \: \dfrac{v \: - \: u}{t} \: }} \\ \end{gathered}

Acceleration=

t

v−u

Where ,

V denotes to Final Velocity .

U denotes to Initial Velocity .

T denotes to Time Taken .

Therefore , by Substituting the given values in the above Formula :-

\begin{gathered} \dag \: \: \: \: \sf{Acceleration \: = \: \dfrac{Final \: Velocity \: - \: Initial \: Velocity}{Time} } \\ \end{gathered}

†Acceleration=

Time

FinalVelocity−InitialVelocity

\begin{gathered} \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{0 \: - \: 60}{85} } \\ \end{gathered}

⟼Acceleration=

85

0−60

\begin{gathered} \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{60}{85} } \\ \end{gathered}

⟼Acceleration=

85

60

\longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 0.70 }}⟼Acceleration = 0.70

Hence :-

Acceleration = 0.70 m/s² .

\underline {\rule {210pt} {4pt}}

Note :-

Kindly Scroll the Screen from Right to Left for Better View .

Other Questions
The fuel gauge shows how much fuel is left in a 10 gallon tank. How far can you drive if the car's average fuel consumption is 40 miles per gallon? Hurrrryyyyy plsBased on the experiment below, what was the dependent variable?BeanSoilBeanSoilBeanSoilHeight 20.4 cmMass: 159Height: 45.7 cmMass: 6.19Height: 46.5 cmMass: 6.69LIDaily water 10 mLA Daily water 50 mLBDaily water 100 mL Jameson wants to construct a ladder that has 8 rungs. Each rung is3.2 feet wide. The two sides measure 10.6 feet each. The wood issold for $2.25 per linear foot. Find how much the wood to constructthis ladder will cost Jameson. 5.NBT.7 Willa and her friend decide to hang out at her friends house after basketball practice on Friday to listen to a new album by their favorite band. They have a great time listening to the music and Willa deliberately ignores texts from her dad. When she gets home, her dad is really upset with her. He didnt know where she was. He has a rule that he needs to know where she is and that she has to ask permission before she goes anywhere. Willa thinks that since shes in eighth grade, she shouldnt have to do this anymore. Her dad should trust her more. Willa tells her dad that shes not a little kid anymore and storms off to her room and slams the door. Willas Perspective 1. How might Willa be feeling? 2. What might she be thinking? What might she be needing or wanting? How could understanding each others perspective help with the conflict? Which terminal punctuation mark would you use to end this sentence?thHooray| The village is saved!O Hooray! The village is saved!O Hooray. The village is saved!O Hooray? The village is saved! Math accelerated chapter 8 equations and inequalities answer key Plot the points A(7,1), B(-2, 3), C(1, -7) on the coordinate axes below. State thecoordinates of point D such that A, B, C, and D would form a parallelogram.(Plotting point D is optional.) 100 Points and Brainly.Graph The equation: y=(-x)-6Gibberish for points WILL NOT be tolerated. Please, if you can, try to make the mark ON the picture I have provided, in red. Cindy is studying to be a high school health teacher. She is shocked to discover that one in ____ U.S. teenagers are considered obese. Find the 53rd multiple of 62, if the 54th multiple is 3348. 1) the height is 11 ft2) base is 9 in and the height is 3 inI just need to know the area Kim is 15 years old. Her father is 4 times as old as her now. In how many years time their total age be 115 years. Help help help help help I had to only use a pic because no one would be able to understand, worth 100 points IF you get it correct. From a point 54.0 feet from the base of a flagpole, the angle of elevation to the top of the flagpole is 68.5. find the height of the flagpole. How did women's rights influence the West?O Women had difficulty getting a divorce in the West, so there were more married people there.o Women had more rights than men, which stopped men from moving to the West and hurt the political power of the region.O Women had fewer rights in the West so they stayed away.O Women had more political power in the West, which encouraged more of them to move westward in search of opportunity. how do most people make their opinions known to govenment officialsa: votingb: paying taxes c: being informedd: attending school The roof word of dislike addition preview unfriendly slowest A traffic flow has density 61 veh/km when the speed is 59 veh/hr. If a flow has a jam density of 122 veh/km, what is the maximum flow in veh/hr (in whole number)? Use Greenshield Model. Find the domain over which the function y = x + 6x is monotonic increasing.