2 A car rounding a bend travels in an arc of a circle.
a What provides the centripetal force?
b Is a larger or a smaller centripetal force required if
(i) the car travels faster,
(ii) the bend is less curved,
(iii) the car has more passengers?

Answer:

Tension = 0.012 N

Explanation:

If the black widow spider is hanging vertically motionless from the ceiling above. Then, the weight of the spider must be balancing the tension in the spider web. Therefore,

Tension = Weight

Tension = mg

where,

m = mass of spider = 1.27 g = 0.00127 kg

g = acceleration due to gravity = 9.8 m/s²

Therefore,

Tension = (0.00127 kg)(9.8 m/s²)

Tension = 0.012 N

Correct question is;

In an RC parallel circuit, Et = 480 V, R = 50kΩ, and XC = 47 kΩ. What is the reactive power?

Answer:

P_r = 4.9 VARs

Explanation:

We are given;

Total voltage: Et = 480 V

Resistance; R = 50kΩ = 50000 Ω

Capacitive reactance; XC = 47 kΩ = 47000 Ω

Formula for current across the capacitor is;

Et = I_c • XC

I_c = Et/XC

l_c = 480/47000

I_c = 0.01021 A

Formula for reactive power is;

P_r = (I_c)² × XC

P_r = 0.01021² × 47000

P_r = 4.9 VARs

Answer: Balanced

Explanation: When a bird is perched on a tree it is sitting still will stay still if the forces acting on it are balanced.

Answer:

The required diagram is shown in the figure. When an object is placed in front of the convex lens, i.e., between 2F

1

and F

1

, its image is formed beyond 2F

2

on the other side of the lens. The image is real, inverted and enlarged.

solution

Answer: length,  luminous intensity,mass, time, temperature, electric current, amount of a substance.

Explanation:

Answer:

10

Explanation:

Given that :

Angular speed (w) = 62.8 rad/s

Radius of tire (r) = 30 cm

Number of revolutions per second :

s = 2πr

s = 2π * 0.3 = 1.8849555

The number or revolutions per second :

θ = s / r

θ = 1.884955 / 0.3

θ = 6.283185 rad

Number of revolutions per second :

62.8 / 6.283185

= 9.9949309

= 10

Explanation:

The anomalous expansion of water is an abnormal property of water whereby it expands instead of contracting when the temperature goes from 4o C to 0o C, and it becomes less dense. ... The density becomes less and less as it freezes because molecules of water normally form open crystal structures when in solid form.

Answer:

see explanation

Explanation:

Answer:

a. 13.22 m/s

b. 16.32

c. 1.664 s

d. 13.58

e. 3.328

f. 40.0m

Explanation:

This is basically what the guy said, i dunno if you saw the letters, but he added some at the end of every answer.

Answer:

0.08 m

Explanation:

Linear expansivity brass = 2 * 10^-5 C

Linear expansivity = change in length / (initial length * θ)

Change in length = 0.2cm = 0.002m

Initial length = 2m

2 * 10^-5 = 0.002 / (2 * θ)

(2 * 10^-5 * 2θ) = 0.002

4 * 10^-5θ = 0.002

θ = 0.002 / 4 * 10^-5

θ = 2 * 10^-3 / 4 * 10^-5

θ = 0.5 * 10^2

θ = 50°C

For a rod of original length 80m at the same temperature of 50°C

Linear expansivity = change in length / (initial length * θ)

Change in length = dL

2 * 10^-5 = dL / (80 * 50)

2 * 10^-5 * 80 * 50 = dL

160 * 10^-5 * 50 = dL

8000 * 10^-5 = dL

0.08 m = dL

Hence, change in length = 0.08m

Answer:

a. the density will not change

b. D' = 0.125 D

So, the density will change by a factor of 0.125

Explanation:

a.

Density is the material property and the value of density is constant for all solid materials. So, when the dimensions of the a solid are increased, while the material is same, then the material must be added to the object for increasing its dimensions. So, with the increase in the volume, the mass of the object also increases. And as a result the density of the object remains constant.

Since, here the material remains the same.

Therefore, the density will not change

b.

Density = mass/Volume

D = m/V   ------------ equation (1)

Now,

V = LWH   ----------- equation (2)

Now, if each dimension increases by a factor of 2, the volume becomes:

V' = (2L)(2W)(2H)

V' = 8 LWH

using equation (2)

V' = 8 V

So, for constant mass, density becomes:

D' = m/V'

D' = m/8V

using equation (1)

D' = D/8

D' = 0.125 D

So, the density will change by a factor of 0.125

(a) The density of the object will be reduced by one-eighth times on increasing the dimension by a factor of two and keeping the material constant.

(b)  With constant mass and increasing the dimensions by a factor of 2, the density will reduce by the factor of 1/8.

The degree measure of the compactness of an object is known as the density of an object. Mathematically, it is expressed as the ratio of the mass of the object to its volume.

(a)

Let us consider an object of dimension 'a'. As per the above definition, the density of an object is,

[tex]\rho = \dfrac{m}{V}[/tex]

Here,

m is the mass of the object.

V is the volume of the object. And its value is, [tex]V = a^{3}[/tex].

So the density becomes,

[tex]\rho = \dfrac{m}{a^{3}}[/tex]  ..............................................................(1)

Now, if the dimensions of the object is increased by a factor of 2. Then, new density becomes,

[tex]\rho' =\dfrac{m}{(2a) \times (2a) \times (2a)}\\\\\\ \rho' =\dfrac{m}{8a^{3}}\\\\[/tex]

Substitute the value of equation (1) in the above expression as,

[tex]\rho' =\dfrac{1}{8} \times \dfrac{m}{a^{3}}\\\\\rho' =\dfrac{1}{8} \times \rho[/tex]

Thus, we can conclude that the density of the object will be reduced by one-eighth times on increasing the dimension by a factor of two and keeping the material constant.

(b)

The density of the material is equal to the ratio of the mass of the object (m) and the volume of the object (V). So, if the mass remains unchanged and the dimensions increased by the factor of 2, then the result will remain same as the above part.

Thus, we can conclude that with constant mass and increasing the dimensions by a factor of 2, the density will reduce by the factor of 1/8.

Learn more about the density here:

https://brainly.com/question/952755

Answer:

heat pressure, neutron degeneracy, electron degeneracy,nothing.

Explanation:

In main sequence star, gravity's inward pull is greatly balanced by the heat pressure. In the white dwarf, gravity is mainly balanced by the electron degeneracy pressure that arises from the fact that the electrons are fermions and they obey the Pauli's exclusion principle.  So there is no two electrons that have the same the four quantum numbers.

While in neutron star, the neutron degeneracy pressure obeys the Pauli's exclusion principle that gives rise to the degeneracy pressure and noting pushes against the gravity in the black hole. Therefore the correct option is the heat pressure, neutron degeneracy, electron degeneracy and nothing.

Explanation:

trip 3 ( 9 minutes)

If the ferry is moving at a faster speed, it will travel the same distance in a shorter time. The ferry crossed the river the fastest on Trip 3 because it took the shortest amount of time on that trip.

The answer is 45J

Don’t know how to explain sorry

Answer:

I found the experience tasking

Explanation:

I wouldn't say it was hard, neither was it easy. I'd rather go for something like it being tasking. It's worthy of note that it was my first time, and I think it's very normal especially when one hasn't been doing something of that nature previously. Of course I did my draft, which unsurprisingly happened to be not good enough, and I had to look for templates to guide me through the acceptable way.

I still did it in my own way, but in the right way. Ever since then though, I have never stuttered when writing application letters, as it had since then seem inborn

The experience of writing a bio-data or an application letter was quite a tasking goal, where proper structure is required.

The given problem is based on the fundamentals of bio-data. Biodata is a document that is used to display the biographical data about the work experience in any organization.

Thus, it is concluded that writing a bio-data or an application letter was quite a tasking goal, where proper structure is required.

Learn more about the biodata here:

https://brainly.com/question/22965812

Answer:

When one person applies force f1 = 60 N at one end, the other person applies f2 = 160 - 60 = 100 N. The torques about the center must balance. Thus the distances from the center d1 and d2 must be such that f1*d1 = f2*d2, or 60*1.5 = 100*d2, so d2=0.9. Thus f2 must be applied at a point 1.5 + 0.9 = 2.4 m from the end where f1 is applied.

Answer:

7 * 10^-4Wb

Explanation:

The magnetic flux is the product of the inductance and current

Magnetic flux = LI

L is the inductance = 3.5mH

I is the current = 2.0A

Number of turns N = 2A

Since for a 10-turn solenoid, L = 3.5mH

For a one-turn solenoid, L = 3.5/10 = 0.35mH

magnetic flux = 0.35mH * 2

magnetic flux = 0.35 * 10^-3 * 2

magnetic flux = 0.7* 10^-3

Magnetic flux = 7 * 10^-4Wb

Hence the magnetic flux through each turn is 7 * 10^-4Wb

The magnetic flux through each turn is 7 ×10⁻⁴ Wb. The magnetic flux is the product of the inductance and current.

The surface integral of the normal component of the magnetic field B across a surface is the magnetic flux through that surface. It is commonly indicated by the letters B.

The weber is the SI unit for magnetic flux, while the maxwell is the CGS unit.

The given data in the problem is;

[tex]\rm \phi[/tex] is the magnetic flux =?

L is the inductance = 3.5mH

I is the current = 2.0A

N number of turns of solenoid  = 2A

The inductance for the one turn is found by;

For a 10-turn solenoid, L = 3.5mH

For a one-turn solenoid, L = 3.5/10 = 0.35mH

The megnetic flux through each turn is found by;

[tex]\rm \phi = L \times I \\\\ \rm \phi = 0.35 \times 10^{-3}\times 2\\\\ \rm \phi =7 \times 10^{-4}[/tex]

Hence the magnetic flux through each turn is 7 ×10⁻⁴ Wb.

To learn more about the megnetic flux refer to the link;

https://brainly.com/question/13290530

Answer:

Explanation:

Using the Newtons law of motion;

[tex]\sum Fx = ma_x\\Fm - Ff = ma_x[/tex]

Fm is the moving force = 400N

Ff is the frictional force = μR

μ is the coefficient of kinetic friction

R is the reaction = mg

m is the mass

a is the acceleration

The equation becomes;

[tex]Fm - \mu R = ma_x\\Fm - \mu mg = ma_x\\400- \mu (25)(9.8) = 25(9)\\400 - 254.8 \mu = 225\\- 254.8 \mu = 225 - 400\\- 254.8 \mu = -175\\ \mu = \frac{-175}{- 254.8} \\\mu = 0.69[/tex]

Hence the coefficient of kinetic friction between the box and floor is 0.69

The coefficient of kinetic friction between the box and the floor is 0.714.

Friction: This can be defined as the force that tends to oppose two surfaces in motion.

The question above can be solved using the formula

F-ma = mgμ................. Equation 1

Where F = Force applied to push the box, m = mass of the box, a = acceleration of the box, μ = coefficient of kinetic friction, g = acceleration due to gravity.

make μ the subject of the equation

μ = (F-ma)/mg................ Equation 2

From the question,

Given: F = 400 N, m = 25 kg, a = 9 m/s²,

Constant: g = 9.8 m/s²

Substitute these values into equation 2

μ = [400-(25×9)]/(25×9.8)

μ = (400-225)/245

μ = 175/245

μ = 0.714

Hence, the coefficient of kinetic friction between the box and the floor is 0.714.

Learn more about friction here: https://brainly.com/question/13683196

Answer:

2.71 m

Explanation:

Force is the product of mass and acceleration

F=m*a

Work done is the product of force and distance

Work done=F*d

In this case;

F= 35 N

Work done = 95 J

95 =35 * d

95 /35 = d

2.71 m= d

Answer:

very small...

Explanation:

i guess... but i may be missing something. the question feels too straightforward

Answer:

Twice as much work

Explanation:

Answer:

212 I think

Explanation:

I looked it up

Answer:

What is the acceleration a of the refrigerator 4 s after the person begins pushing on it with a force of 400 N? a=2m/s^2 Applying Newton's 2nd law, a=Fnet/m=(400N)/(200kg)=2m/s^2. The acceleration is constant.

Explanation:

The person begins to push a refrigerator with a force of 400 N. So, the acceleration of the refrigerator will be 2 m/s².

In mechanics, acceleration is the measure of how rapidly an object's velocity changes over time. It is a vector quantity. An object's acceleration depends on the direction of the net force exerted on it.

A vector quantity, acceleration is something that has both a magnitude and a direction. As a vector quantity, velocity is also. The ratio of the velocity vector change over a time interval to that interval is the definition of acceleration.

There are several types of acceleration :

According to the question, the given values are :

Force applied to the refrigerator is 400 N.

The mass of the refrigerator is 200 kg.

Use the 2nd law of newton,

[tex]Force= mass*acceleration[/tex]

Acceleration = 400/200

Acceleration = 2 m/s².

To get more information about Acceleration :

https://brainly.com/question/2303856

#SPJ12

Answer:

the correct answer is E

Explanation:

Work is defined by the expression

        W = F. d

Where the bold indicates vectors, we can make the dot product explicit

         W = F d cos θ

We can see that this definition of work the two men apply a force, but the wall does not move, so if there is no displacement the work is zero.

When checking the correct answer is E

Answer: ok

Explanation: ok

Answer:

The angle between the electric field and the axis of the filter is 54⁰

Explanation:

Apply the equation for intensity of light through a polarizer.

[tex]I = I_oCos^2 \theta[/tex]

where;

I is the intensity of the transmitted light

I₀ is the intensity of the incident light

θ is the incident angle

If only 35 % of the intensity of a polarized light wave passes through a polarizing filter, then the ratio of the intensity of the transmitted light to that of the intensity of the incident light is given by;

[tex]\frac{I}{I_o} = Cos^2 \theta\\\\\frac{35}{100} = Cos^2 \theta\\\\Cos^2 \theta = 0.35\\\\Cos\theta = \sqrt{0.35} \\\\Cos\theta = 0.5916\\\\\theta = Cos^{-1}(0.5916)\\\\\theta = 54 ^0[/tex]

Therefore, the angle between the electric field and the axis of the filter is 54⁰

The angle between the electric field and the axis of the filter for the polarized light wave which passes through a polarizing filter is 54°.

The electric field is the field, which is surrounded by the electric charged. The electric field is the electric force per unit charge.

From the Malus's law, the intensity of the polarized beam can be calculated with the following formula.

[tex]I=I_o\cos^2\theta[/tex]

Here, (I₀) is the intensity of the polarized beam incident on the observer θ is the angle of incident.

It is given that only 35 % of the intensity of a polarized light wave passes through a polarizing filter.

The angle between the electric field and the axis of the filter can be found out using the above formula as,

[tex]35\%=(100\%)\cos^2\theta\\\theta=\cos^{-1}\sqrt{\left(\dfrac{35}{100}\right)}\\\theta=54^o[/tex]

Hence, the angle between the electric field and the axis of the filter for the polarized light wave which passes through a polarizing filter is 54°.

Learn more about electric field here;

https://brainly.com/question/14372859

Answer: Your correct answer would be the second option; axial and appendicular. The axial region makes up the axis of the human body, this includes your head, neck, etc. The appendicular region makes up the parts of the human body that connects to the axial region, for example limbs and appendages.