Answer:
40 degrees Celsius
Explanation:
Have a great summer :)
Gold at 100.0°C is placed in 2.00×10^2 g of water at 20.0°C. The mixture reaches equilibrium at 21.2°C. the specific heat of gold is 0.129 (J/g°C) What is the mass of the gold? Specific heat of water is 4.18 (J/g°C) .
Answer:
there it is fella atleast i tried
Your friend has informed you that his/her uncle has decided not to look after him anymore.Write to your friends uncle giving him at least two reasons why he should change his mind
Answer:
Cause you are their family and they need you. Do you wanna be someone who abandoned them or be the one they look to and dont dislike into adulthood. Also you signed onto this job no one said it was going to be easy but you making your life easier but harder for someone who is just a kid who still needs you.
A swimmer is capable of swimming at 1.4m/s in still water. a. How far downstream will he land if he swims directly across a 180m wide river? b. How long will it take him to reach the other side.
Answer:
t = 180 / 1.4 = 129 sec (time to swim horizontally across river)
S = 129 sec * V where V is speed of current and S is the distance he will be carried downstream
The problem does not specify V the speed of the river
Answer:
Explanation:
From the given information:
a) the distance(D) showing how dar downstream he will land can be computed as follows:
Assuming the current of the river = 0.2 m/s
[tex]D = \dfrac{180 \ m \times 0.2 \ m/s}{1.4 \ m/s}[/tex]
D = 36 m ÷ 1.4
D = 25.71 m
The required time (t) to reach the other side is:
time (t) = 180 m/ 1.4 m/s
time (t) = 128.57 seconds
Answer pls…………………………
From the graph below, which segment has the fastest speed--A, B, C, D, or E?
Answer:
D bcz the slope rose the fastest
Explanation:
I DON'T WANNA BE QUESTIONED, THIS IS BECAUSE y POSITION ROSE FASTER THAN x POSITION
A current of 17 A flows through a resistor of 10 2. What is the voltage
across the resistor
A football is projected at an angle of 30 from the ground with a n initial velocity of 10 m/s, take acceleration due to gravity is g= 10m/s2 .what is the time of flight
Answer: i dont know
Explanation:
Answer:
[tex]{ \bf \: time \: of \: flight : s = 0} \\ { \tt \: s \: is \: displacement} \\ \\ s = ut + \frac{1}{2} a {t}^{2} \\ 0 = u \sin( \theta) t - \frac{1}{2} g {t}^{2} \\ u \sin( \theta)t = \frac{1}{2} g {t}^{2} \\2 u \sin( \theta) = gt \\ { \boxed{ \tt{formular : time \: of \: flight = \frac{2u \sin( \theta) }{g} }}} \\ t = \frac{2 \times 10 \times \sin(30 \degree) }{10} \\ { \green{ \boxed{ \tt{ \bf{answer : { \tt{time \: of \: flight =1 \: second }}}}}}} \\ \\ { \tt{becker \: jnr}}[/tex]
A chemical reaction is the change that takes place when ____ or more substances interact to form new substances.
Answer:
two or more substances
Explanation:
A chemical reaction can't take place if there is only one substance
Answer:
A chemical reaction is the change that takes place when two
or more substances interact to form new substances.
Explanation:
Chemical reactions occur when chemical bonds between atoms are formed or broken. The substances that go into a chemical reaction are called the reactants, and the substances produced at the end of the reaction are known as the products.
B
oc
OD
A metal has a specific heat capacity of 360J/(kg°C).
An object made of this metal has a mass of 2.0kg.
What is the thermal capacity (heat capacity) of the object?
Answer:
Thermal capacity of the object = 720 j/°C
Explanation:
Given:
Specific heat capacity of metal = 360J/(kg°C)
Mass of given object = 2 kg
Find:
Thermal capacity of the object
Computation:
Thermal capacity = Specific heat x Mass
Thermal capacity of the object = Specific heat capacity of metal x Mass of given object
Thermal capacity of the object = 360 x 2
Thermal capacity of the object = 720 j/°C
Which of the following is not a true statement
Answer:
gadjgdasgdghgsdgd
Explanation:sorry need answer
Answer:
V * t = cm/sec * sec = cm
V * t should give distance as a result -
The other three fit the fundamental equations
Why do we see different phases of the lunar cycle?
A) As the moon rotates around its axis, different sides of it become visible.
B) as the earth rotates its axis, people can see different sides of the moon.
C) as earth revolves around the sun, the moon is cast into different shadows by earth.
D) as the moon revolves around earth, the different amounts of the sunlit side faces earth.
Answer: The answer is: D) as the moon revolves around earth, the different amounts of the sunlit side faces earth.
Explanation: I have my ways ;>
Have a great day!
-Sunny
A ball is thrown vertically up. If the ball reached at maximum height in 3s. Assume air resistance is negligible. What is the initial velocity of the ball. (Answer using a coordinate system where upwards is positive)
Answer:
Explanation:Gravitational force always acts on the ball in the downward direction, thus an acceleration due to gravity always point in the downward direction with a constant magnitude 10.6m/s
PLS HELP IM GOING TO GIVE U BRAINLIST
The nucleus contains positively charged protons and uncharged neutrons . Protons and neutrons are collectively referred to as
A. nucleons
B. atoms
C. ions
d. molecules
ASAPP PLS HELP MEE
The density of aluminum is 2.7 g/cm^3. Which of the following statement is true?
A) 1 g of aluminium has a volume of 1 cm^3
B) 2.7 g of aluminium has a volume of 1 cm^3
C) 1 g of aluminium has a volume of 2.7 cm^3
D) 2 g of aluminium has a volume of 7 cm^3
Answer:
B) 2.7 g of aluminium has a volume of 1 cm^3
Explanation:
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
[tex]Density = \frac{mass}{volume}[/tex]
If the density of aluminum is 2.7 g/cm³, it simply means that 2.7 g of aluminium has a volume of 1 cm³
Check:
Given the following data;
Mass = 2.7 grams
Volume = 1 cm³
Substituting into the formula, we have;
[tex]Density = \frac{2.7}{1}[/tex]
Density = 2.7 g/cm³
Match the reactants with the products. zinc sulfate + copper aluminum chloride + copper copper oxide copper + water copper sulfate + oxygen
Answer:
The Reactants Products
Copper sulfate + zinc → Zinc sulfate + copper
aluminum + copper chloride → Aluminum chloride + Copper
Copper + Oxygen → Copper oxide
Explanation:
The Reactants Products
Copper sulfate + zinc Zinc sulfate + copper
aluminum + copper chloride Aluminum chloride + Copper
Copper + Oxygen Copper oxide
First reaction can be described as a single replacement reaction
Second reaction is also a single replacement reaction just like the first reaction
The third is a synthesis reaction ( i.e. reaction in which elements combine to form single compound )
A runner is traveling with an initial velocity of 0.3 m/s in the positive direction accelerates at a constant rate of 0.4m/s^2 for a time of 2 seconds. What is the velocity at the end of 2 seconds?
Answer:
1.1 m/s
Explanation:
Applying,
v = u+at.............. Equation 1
Where v = final velocity, u = initial velocity, a = acceleration, t = time.
From the question,
Given: u = 0.3 ms, a = 0.4 m/s², t = 2 seconds
Substitute these values into equation 1
v = 0.3+0.4(2)
v = 0.3+0.8
v = 1.1 m/s
Hence the velocity at the end of 2 seconds is 1.1 m/s
five scientist who travelled to space
Answer:
The Most Famous Astronomers of All Time. Karl Tate, SPACE.com. ...
Claudius Ptolemy. Bartolomeu Velho, Public Domain. ...
Nicolaus Copernicus. Public Domain. ...
Johannes Kepler. NASA Goddard Space Flight Center Sun-Earth Day. ...
Galileo Galilei. NASA
The valid digits in a measurement are called _____ digits.
Answer:
Significant
Explanation:
As the word suggests, significant figures or digits are numbers that are valid in measurement.
Answer:
SIGNIFICANT DIGITS
Explanation:
MARK ME BRAINLIEST PLZZZ
An object with a mass of 7.60 kg is moving to the right and experiences an applied force of 50 N to the right. The friction force on this object is 30 N to the left. What is the acceleration of the object?
Answer:
Explanation:
We will use the equation F - f = ma, which is a fancy way of stating Newton's 2nd Law.
F = +50.0,
f = -30.0,
m = 7.60 kg. Therefore:
50.0 - 30.0 = 7.60a and
20.0 = 7.60a and
a = 20.0/7.60 so
a = 2.63 m/s/s to the right
An aluminium cube of side 5cm and R.D 2.7 is suspended by a thread in alcohol of relative density 0.8o. Find the tension in thread.
Answer:
The tension in the thread is approximately 3.2103225 Newtons
Explanation:
The given parameters are;
The side length of the aluminum cube, s = 5 cm
The R.D. of aluminum = 2.7
The relative density of alcohol into which the aluminum cube is placed = 0.8
The volume of the aluminum cube, V = s³ = (5 cm)³ = 125 cm³
The mass of the aluminum cube, V = The volume of the cube
The mass of the aluminum cube, m = V × R.D. × Density of water
m₁ = 0.000125 × 2.7 × 970 = 0.327375 kg
The mass of the alcohol displaced, m₂ = 0.000125 × 0.8 × 970 = 0.097
The tension in the string, T = The apparent weight of the aluminum cube, Wₐ
∴ The tension in the thread, T = Wₐ = (m₁ - m₂) × g
Where;
g = The acceleration due to gravity ≈ 9.81 m/s²
∴ T ≈ (0.327375 - 0.000125) × 9.81 = 3.2103225
The tension in the thread, T ≈ 3.2103225 N.
Which of these is untrue about ray diagrams?
A. The arrowheads show the direction of the light
B. Lines must always be straight
C. More arrowheads on lines mean a brighter light
Answer:
The untrue option is C: "More arrowheads on lines mean a brighter light"
Explanation:
Ray diagrams are used to show how the light behaves with things like mirrors or lenses. Where we only study how the direction of the light changes when it interacts with these objects.
The "light" is represented with arrows, where again, the only thing we care is the direction of the light, so the first statement is true, the arrowheads show the direction of the light, and only that.
The intensity of the light, in this context, has no effect on how light behaves, so there is not a necessity of representing the intensity of the light, thus, more arrowheads on lines do not mean a brighter light. It may only be used to represent changes in direction of the light.
Finally, we know that light travels in straight pats (the pats can be curved in some cases, like with large gravitational fields, but this is not the case of a ray diagram) so the lines that represent the light should always be straight, thus option B is also true.
The untrue option is C: "More arrowheads on lines mean a brighter light"
A girl travels 50m in 12s and then another 30m in 5s .Calculate her average speed?
Answer:
4.71m/s
Explanation:
Average speed = Total distance travelled ÷ Total time taken.
80/17=4.71
4.71m/s
Answer:
Average speed = Total distance travelled ÷ Total time taken.In this question,
Total distance travelled = 50m + 30m= 80m.
Total time taken = 12s + 5s= 17s
So, Average speed would be 80 ÷ 17
= [tex]\frac{80}{17}[/tex]
= 4.71 m/s. or 4.71 meter per second.
calculate the volume of a ball having radius of 8 cm
Step-by-step explanation:
V = 2,143. 6 cm³ (rounded to one-decimal place) is the volume of a ball that has a radius of 8 cm.
Answer:
2143.57 cm^3
Explanation:
volume of a ball = 4/3 *π*r^3
= [tex]\frac{4}{3} *3.14 *8^{3}[/tex]
=[tex]\frac{4*3.14}{3} *512[/tex]
[tex]\frac{12.56}{3} *512[/tex]
=[tex]\frac{12.56*512}{3}[/tex]
=[tex]\frac{6430.72}{3}[/tex]
=2143.57
Jenny is doing her homework when Jenny writes, the pencil exerts a force of 5N on the paper. The area of the pencil in contact with the paper is 0.5mm2 calculate the pressure of the pencil in the paper give the unit
Answer:
here is your answer
mark me as brainlist
1) Un cuerpo se mueve desacelerando a razón de 8m/s2, calcula: a) La velocidad que tenía 5 segundos antes de detenerse. b) La distancia recorrida los últimos 5 segundos de su trayectoria.
Answer:
Initial velocity (u) = 40 m/s
Distance travel in last 5 seconds = 100 m
Explanation:
Given:
Acceleration (a) = 8 m/s²
Final velocity (v) = 0 m/s
Find;
1] Initial velocity before 5 sec
2] Distance travel in last 5 seconds
Computation:
1] Initial velocity before 5 sec
v = u + at
0 = u + (-8)(5)
u - 40 = 0
Initial velocity (u) = 40 m/s
2] Distance travel in last 5 seconds
s = ut + (1/2)(a)(t²)
s = (40)(5) + (1/2)(-8)(5²)
s = 200 - 100
Distance travel in last 5 seconds = 100 m
Which has greater kinetic energy, a car traveling at 40 mph or a half-as-massive car traveling at 80 mph?
a
-The 40 mph car
-The 80 mph car
-Both have the same kinetic energy
-Neither has kinetic energy
Answer:
The 80 mph car
Because the formula says 1/2 mass but for the velocity it is squared
To pop a balloon you stab it with a pencil. If the area of the pencil tip is .01 cm² and the pressure applied by the pencil to the balloon is 100 N/ cm², how hard (what force) must you push on the pencil to make the balloon pop?
Answer:
Push with force of 1N
Explanation:
I have explained in the paper.
Goodluck
You must push with 1 newton on the pencil to make the balloon pop.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
A spring balance can be used to calculate the Force. Newton is the SI unit of force.
Applied pressure is = 100 N/cm².
Cross sectional area = 0.01 cm².
The required force = pressure × area
= 100 N/cm² × 0.01 cm²
= 1 Newton.
Hence, you must push with 1 newton on the pencil to make the balloon pop.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
skater with a mass of 50.0 kg slides across an icy
pond with negligible friction. As he approaches a
friend, both he and his friend hold out their hands,
and the friend exerts a force in the direction oppo-
site to the skater's movement, which slows the skat-
er's speed from 2.0 m/s to 1.0 m/s. What is the
change in the skater's kinetic energy?
A. –25 J
C. – 100J
B. -75J
D. -150J
Answer:
B
Explanation:
Calculate the kinetic energy before and after they hold hands. Then, to find the change in kinetic energy simply subtract the final KE by initial KE.
Which statement is the best interpretation of the ray diagrem shown below
Answer:
B...................
Answer:
Option A is correct: "A concave mirror forming a larger, virtual image"
Explanation:
There are two types of mirror:
Concave (converging) mirrors: a concave mirror is a mirror that reflects the light inward
Convex (diverging) mirrors: a convex mirror is a mirror that reflects the light outward
The image formed by a mirror can also be of two types:
Real image: it is formed on the same side of the object, with respect to the mirror
Virtual image: it is formed on the opposite side of the object, with respect to the mirror
In the figure of this problem, we see that:
< The mirror reflects the light from the object inward --> so it is a concave mirror
< The image is formed on the other side of the mirror --> it is a virtual image
So the correct option is
A) A concave mirror forming a larger, virtual image
help please just give the answers asap no explanation needed
Answer:
where is the question? I can only see the diagram
d) is an atom of Sodium and an atom of Chlorine.
e) is a molecule of water.