Answer:
See explanation
Explanation:
a) maximum height of a projectile = u sin^2θ/2g
H= 600 × (sin 30)^2/2 × 10
H= 7.5 m
b) Time of flight
t= 2u sinθ/g
t= 2 × 600 sin 30/10
t= 60 seconds
Range
R= u^2sin2θ/g
R= (600)^2 × sin2(30)/10
R= 31.2 m
Write one advantage of MKS system over CGS system.
A hot air balloon is a sphere of volume 2210 m3. The density of the hot air inside is 1.13 kg/m3, while the air outside has a density of 1.29 kg/m3. The balloon itself has a mass of 240 kg. What is the TOTAL NET force acting on the balloon?
[?]N
The total net force acting on the balloon will be 24498 Newtons
Given that
Volume of the balloon = 2210 cubic meter
Density of the air inside the balloon = 1.13 kg/m3
What will be the net force exerted on the balloon ?Here force on the balloon will be equal to the weight of the air displaced by balloon
[tex]F= mass of air displaced\times gravity[/tex]
[tex]F= Density \times volume \times gravity[/tex]
[tex]F=1.13 \times 2210 \times 9.81[/tex]
[tex]F=24498 N[/tex]
The total net force acting on the balloon will be 24498 Newtons
To know more about buoyancy force follow
https://brainly.com/question/117714
When a rigid body rotates about a fixed axis, all the points in the body have the same Group of answer choices linear displacement. angular acceleration. centripetal acceleration. tangential speed. tangential acceleration.
Answer:
angular acceleration.
Explanation:
Newton's law of universal gravitation states that the force of attraction (gravity) acting between the Earth and all physical objects is directly proportional to the Earth's mass, directly proportional to the physical object's mass and inversely proportional to the square of the distance separating the Earth's center and that physical object.
Generally, when a rigid body is made to rotate about a fixed axis, all the points in the body would typically have the same angular acceleration, angular displacement, and angular speed.
In the following calculations, be sure to express the answer in standard scientific notation with the appropriate number of
significant figures.
3.88 x 1079 - 4.701 x 1059
x 10
g
Answer:
-45,597.07
Explanation:
if not in scientific calculator and yung answer nung sa scientific sa comment na lang dinadownload ko ka eh
A proton traveling due west in a region that contains only a magnetic field experiences a vertically upward force (away from the surface of the earth). What is the direction of the magnetic field?
South
Explanation:
The magnetic force F on a point charge moving with a velocity v in the presence of a magnetic field B is given by
[tex]\vec{\textbf{F}} = q\vec{\textbf{v}}\textbf{×}\vec{\textbf{B}}[/tex]
and according to the right-hand rule, an upward magnetic force on a proton moving westward is only possible if the magnetic field is directed southward.
Displacement of a body moving in circular motion is
Explanation:
Displacement of a body moving in circular motion is called uniform circular motion.
hope it is helpful to you
Answer:
A constantly moving object with consistent circular movement. However, for its change in direction, it is accelerating
Explanation:
Uniform circular motion in a circle at constant rate can be described as the motion of the object. When an object moves in a circle, it changes its direction constantly. The object moves tangently to the circle at all times. As the velocity vector direction is the same as the object motion direction, the velocity vector is tangent to the circle. This is shown in the animation on the right by a vector arrow.
An item is accelerating that moves in a circle. Objects that accelerate are subjects that change their speed – either the velocity (i.e. the vecteur magnitude) or the direction. An object with consistent circular movement moves at a constant speed. However, because of its change in direction, it is accelerating. The acceleration direction is inside. The animation on the right shows this through a vector arrow
For an object with only a uniform circular movement, the final motion is the net force. The The net force acting on this object is directed to the middle of the circle. The net force is an inner or centripetal force. Without such a deepest force, an object would continue in a straight direction, never deviating. Regrettably, with the inward net force, perpendicular to the vector, the object changes the direction and is accelerated internally.
Can you think of reasons why the charge on each ball decreases over time and where the charges might go
Answer:
By the principle of corona discharge.
Explanation:
The charge on each ball will decreases over time due to the electrical discharge in air.
According to the principle of corona discharge, when the curvature is small, the discharge of the charge takes placed form the pointed ends.
a vessel with mass 10kg intially moving withthe velocicity 12m s along the x axis explodes into three exactly identical pieces Just after the explosion one piece moves with speed 10 m s along the x axis and asecond piece moves with speed 10 m s along the y axis What iis the magnitude of the component of velocity of the third piece along the y axiss
Answer:
Explanation:
Apply law of conservation of momentum along y-axis.
Initially there was no momentum along y-axis. So there will be nil momentum along y-axis again finally.
Let the mass of each piece after breaking be m .
Momentum of piece moving along positive y-axis
= m x 10 = 10m .
Let the component of velocity of third piece along y-axis be v .
Its momentum along the same direction = m v .
Total momentum along y -axis = 10 m + m v
According to law of conservation of momentum
10 m + mv = 0
v = - 10 m/s .
Component of velocity of the third piece along y-axis will be - 10 m/s .
In other words it will be along negative y-axis with speed of 10 m/s.
An unwary football player collides with a padded goalpost while running at a velocity of 7.50 m/s and comes to a full stop after compressing the padding and his body 0.350 m. (a) What is his deceleration
Answer:
a= -80.357 m/s
Explanation:
use the formula
vf^2=vi^2+2a(xf-xi)
Plug in givens
0=(7.50)^2+2a(0.350m)
solve for acceleration
a= -80.357 m/s
g A mass of 2.0 kg traveling at 3.0 m/s along a smooth, horizontal plane hits a relaxed spring. The mass is slowed to zero velocity when the spring has been compressed by 0.15 m. What is the spring constant of the spring
By the work-energy theorem, the total work done on the mass by the spring is equal to the change in the mass's kinetic energy:
W = ∆K
and the work done by a spring with constant k as it gets compressed a distance x is -1/2 kx ²; the work it does is negative because the restoring force of the spring points opposite the direction in which it's getting compressed.
So we have
-1/2 k (0.15 m)² = 0 - 1/2 (2.0 kg) (3.0 m/s)²
Solve for k to get k = 800 N/m.
Which level of government relies the most on income tax?
OA.
federal
state
OC.
local
Answer:
Its the Federal government
(a) What is the maximum frictional force (in N) in the knee joint of a person who supports 45.0 kg of her mass on that knee if the coefficient of static friction is 0.016
Answer:
f = 7.06 N
Explanation:
The maximum frictional force on the knee joint of the person can be given by the following formula:
[tex]f = \mu R = \mu W \\[/tex]
where,
f = maximum frictional force = ?
μ = static friction coefficient = 0.016
W = Weight load on knee = mg
m = mass supported by knee = 45 kg
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]f = \mu mg\\f = (0.016)(45\ kg)(9.81\ m/s^2)\\[/tex]
f = 7.06 N
A conducting sphere of radius 5.0 cm carries a net charge of 7.5 µC. What is the surface charge density on the sphere?
Answer:
[tex]\sigma=0.014\ C/m^2[/tex]
Explanation:
Given that,
The radius of sphere, r = 5 cm = 0.05 m
Net charge carries, q = 7.5 µC = 7.5 × 10⁻⁶ C
We need to find the surface charge density on the sphere. Net charge per unit area is called the surface charge density. So,
[tex]\sigma=\dfrac{7.5\times 10^{-6}}{\dfrac{4}{3}\pi \times (0.05)^3}\\\\=0.014\ C/m^2[/tex]
So, the surface charge density on the sphere is [tex]0.014\ C/m^2[/tex].
An electron in a hydrogen atom is in a p state. Which of the following statements is true?
a.
The electron’s wavefunction has at least one node (i.e., at least one place in space where it goes to zero).
b.
The electron has an energy of -13.6 eV.
c.
The electron has a total angular momentum of ħ.
d.
The electron has a z-component of angular momentum equal to sqrt(2)* ħ.
Answer:
The electron’s wavefunction has at least one node (i.e., at least one place in space where it goes to zero).
Explanation:
We know that the p-orbitals have nodes. A node is a region where the probability of finding an electron goes down to zero.
P orbitals are oriented along the x,y,z Cartesian axes and are known to have angular nodes along the axes.
Hence, if an electron in a hydrogen atom is in a p state, the electron’s wavefunction has at least one node
Which simple machine is shown in the diagram?
a wedge
a screw
an inclined plane
a wheel and axle
Answer:
Wheel and axle
Explanation:
Which simple machine is shown in the diagram?
a wheel and axle
From the given diagram, the machine shown is actually a wheel and axle
Description of wheel and axle
The wheel and axle is a machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other.
Answer:
Wheel and axle
Explanation:
An automobile engine has an efficiency of 22.0% and produces 2510 J of work. How much heat is rejected by the engine
Answer:
If efficiency is .22 then W = .22 * Q where Q is the heat input
Heat Input Q = 2510 / .22 = 11,400 J
Heat rejected = 11.400 - 2510 = 8900 J of heat wasted
Also, 8900 J / (4.19 J / cal) = 2120 cal
An efficiency is the measure of productivity of an engine. The heat rejected by the engine is 8900 Joules.
What is efficiency?An efficiency of a heat engine is the ratio of the work done and heat supplied.
Given is the automobile engine has the efficiency 22% and Work done is 2510 Joules.
The efficiency is written as,
η= W / Qs.
The work done is W= Qs - Qr, where Qr is the rejected heat.
The heat rejected can be represented as
Qr = W ( 1/η -1)
Substituting the value into the equation, we get the rejected heat.
Qr = 2510 (1/0.22 -1)
Qr = 8900 Joules.
Thus, the heat rejected by the engine is 8900 Joules.
Learn more about efficiency.
#SPJ2
A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a compressed position. The record of time is started when the oscillating mass first passes through the equilibrium position, and the position of the mass at any time is described by
The question is incomplete. The complete question is :
A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a compressed position. The record of time is started when the oscillating mass first passes through the equilibrium position, and the position of the mass at any time is described by x = (4.7 cm)sin[(7.9 rad/s)πt].
Determine the following:
(a) frequency of the motion
(b) period of the motion
(c) amplitude of the motion
(d) first time after t = 0 that the object reaches the position x = 2.6 cm
Solution :
Given equation : x = (4.7 cm)sin[(7.9 rad/s)πt].
Comparing it with the general equation of simple harmonic motion,
x = A sin (ωt + Φ)
A = 4.7 cm
ω = 7.9 π
a). Therefore, frequency, [tex]$f=\frac{\omega}{2 \pi}$[/tex]
[tex]$=\frac{7.9 \pi}{2 \pi}$[/tex]
= 3.95 Hz
b). The period, [tex]$T=\frac{1}{f}$[/tex]
[tex]$T=\frac{1}{3.95}[/tex]
= 0.253 seconds
c). Amplitude is A = 4.7 cm
d). We have,
x = A sin (ωt + Φ)
[tex]$x_t=4.7 \sin (7.9 \pi t)$[/tex]
[tex]$2.6 = 4.7 \sin (7.9 \pi t)$[/tex]
[tex]$\sin (7.9 \pi t) = \frac{26}{47}$[/tex]
[tex]$7.9 \pi t = \sin^{-1}\left(\frac{26}{47}\right)$[/tex]
Hence, t = 0.0236 seconds.
A 55-kg block, starting from rest, is pushed a distance of 5.0 m across a floor by a horizontal force Fp whose magnitude is 140 N. Fp is parallel to the displacement of the block. The final speed of the block is 2.35 m/s.
a) How much work was converted to thermal energy? What work did friction do on the box?
b) What is the coefficient of friction?
Answer:
The answer is "151.25 J and -547.64 J".
Explanation:
[tex]u = 0\\\\v = 2.35\ \frac{m}{sec}\\\\d = 5.0 \ m\\\\[/tex]
Using formula:
[tex]v^2 = u^2 + 2 \times a \times d\\\\2.35^2 = 0^2 + 2 \times a \times 5\\\\a = \frac{2.35^2}{10} \\\\[/tex]
[tex]= 0.55 \ \frac{m}{sec^2}\\\\[/tex]
[tex]F_{net} = m \times a\\\\F_{net} = 55 \times 0.55 = 30.25\ N\\\\[/tex]
Calculating the Work by net force
[tex]W = F_{net}\times d\\\\W = 30.25 \times 5 = 151.25 \ J\\\\[/tex]
The above work is converted into thermal energy.
Now,
[tex]F_{net} = F_p - F_f\\\\F_p = 140 \ N\\\\F_f = u_k\times m \times g = u_k \times 55 \times 9.81\\\\F_f = 539.55 \times u_k\\\\30.25 = 140 - u_k \times 55 \times 9.81\\\\u_k = \frac{(140 - 30.25)}{(55\times 9.81)}\\\\uk = 0.203 = \text{Coefficient of friction}\\\\W_f = -F_f \times d\\\\W_f = -0.203 \times 55 \times 9.81 \times 5\\\\Work\ done\ by\ friction = -547.64 \ J[/tex]
An electric lamp consumes 60W at 220 volts. How many dry cells of 1.5 V and internal resistance 1 Ohm are required to glow the lamp?
Answer:
1. Number of dry cells of 1.5 V required is 40.
2. Number of internal resistance of 1 ohm required is 807
Explanation:
We'll begin by calculating the resistance. This can be obtained as follow:
Power (P) = 60 W
Voltage (V) = 220 V
Resistance (R) =?
P = V²/R
60 = 220² / R
Cross multiply
60 × R = 220²
60 × R = 48400
Divide both side by 60
R = 48400 / 60
R ≈ 807 Ohm
1. Determination of the number of dry cells of 1.5 V required.
Voltage (V) = 220
Dry Cells = 1.5 V
Number of dry cells (n) =?
n = Voltage / Dry cells
n = 60 / 1.5
n = 40
2. Determination of the number of internal resistance of 1 ohm required.
Resistance (R) = 807 Ohm
Internal resistance (r) = 1 ohm
Number of internal resistance (n) =?
n = R/r
n = 807 / 1
n = 807
SUMMARY:
1. Number of dry cells of 1.5 V required is 40.
2. Number of internal resistance of 1 ohm required is 807
Name the electrolyte in the chemical method of generating electricity
A wave moves in a rope with a certain wavelength. A second wave is made to move in the same rope with twice the wavelength of the first wave. The frequency of the second wave is _______________ the frequency of the first wave.
Answer:
The frequency of the second wave is half of the frequency of first one.
Explanation:
The wavelength of the second wave is double is the first wave.
As we know that the frequency is inversely proportional to the wavelength of the velocity is same.
velocity = frequency x wavelength
So, the ratio of frequency of second wave to the first wave is
[tex]\frac{f_2}{f_1} =\frac{\lambda _1}{\lambda _2}\\\\\frac{f_2}{f_1} =\frac{\lambda _1}{2\lambda _1}\\\\\frac{f_2}{f_1} =\frac{1}{2}\\\\[/tex]
The frequency of the second wave is half of the frequency of first one.
The energy truck travelling at 10 km/h has kinetic energy. How much kinetic energy does it have when it is loaded so its mass is twice and its speed is increased to twice?
Explanation:
The initial kinetic energy [tex]KE_0[/tex] is
[tex]KE_0 = \frac{1}{2}m_0v_0^2[/tex]
When its mass and velocity are doubled, its new kinetic energy KE is
[tex]KE = \frac{1}{2}(2m_0)(2v_0)^2 = \frac{1}{2}(2m_0)(4v_0^2)[/tex]
[tex]\:\:\:\:\:\:\:= 8 \left(\frac{1}{2}m_0v_0^2 \right)= 8KE_0[/tex]
Therefore the kinetic energy will increase by a factor of 8.
The gravitational field strength due to its planet is 5N/kg What does it mean?
Answer:
The weight of an object is the force on it caused by the gravity due to the planet. The weight of an object and the gravitational field strength are directly proportional. For a given mass, the greater the gravitational field strength of the planet, the greater its weight.
Weight can be calculated using the equation:
weight = mass × gravitational field strength
This is when:
weight (W) is measured in newtons (N)
mass (m) is measured in kilograms (kg)
gravitational field strength (g) is measured in newtons per kilogram (N/kg)
When an object is in free fall, ____________________.
Answer:
Objects that are said to be undergoing free fall, are not encountering a significant force of air resistance; they are falling under the sole influence of gravity.
Explanation:
Under such conditions, all objects will fall with the same rate of acceleration, regardless of their mass.
Harmonics a.are components of a complex waveform. b.have frequencies that are integer multiples of the frequency of the complex waveform. c.are pure tones. d.have sinusoidal waveforms. e.all of the above
Answer:
b.have frequencies that are integer multiples of the frequency of the complex waveform
Explanation:
Please correct me if I am wrong
What is the total number of moles of products involved in the following reaction?
CaCO3 (s) + 2HCl (aq) - CaCl2 (aq) + CO2 (g) + H20 (g)
O 6
2.
3
5
Answer:
3
Explanation:
You must first make sure the equation is balanced. This one is. Then, you simply add up the coefficients of each compound on the products side of the equation. When the coefficient is not specified, you can assume it is 1 mole. So, in this equation, there is 1 mole of CaCl₂, 1 mole of CO₂, and 1 mole of H₂O = 3 moles.
The reactant side of the equation also has three moles:
1 mole of CaCO₃ and 2 moles of HCl.
What power (in kW) is supplied to the starter motor of a large truck that draws 260 A of current from a 25.5 V battery hookup
Answer:
P = 6.63 kW
Explanation:
Given that,
Current, I = 260 A
Voltage of the battery, V = 25.5 V
We need to find the power supplied to the starter motor. We know that,
P = VI
Put all the values,
P = 25.5 × 260
P = 6630 W
or
P = 6.63 kW
So, the power supplied to the motor is 6.63 kW.
Answer:
The power is 6.63 kW.
Explanation:
Current, I = 260 A
Voltage, V = 25.5 V
Power of an electrical appliance is given by
P = V I
P = 25.5 x 260
P = 6630 W
1 kW = 1000 W
So, the power is
P = 6.63 kW
Physical quantities expresed only by their magnitude is
Answer:
Scalar quantity is the Physical quantity expresed only by their magnitude.
A charge of 0.20uC is 30cm from a point charge of 3.0uC in vacuum. what work is required to bring the 0.2uC charge 18cm closer to the 3.0uC charge?
Answer:
The correct answer is "[tex]4.49\times 10^{10} \ joules[/tex]".
Explanation:
According to the question,
The work will be:
⇒ [tex]Work=-\frac{kQq}{R}[/tex]
[tex]=-\frac{1}{4 \pi \varepsilon \times (18-30)\times 3\times 0.2}[/tex]
[tex]=-\frac{1}{4 \pi \varepsilon \times (-12)\times 3\times 0.2}[/tex]
[tex]=\frac{0.3978}{\varepsilon }[/tex]
[tex]=4.49\times 10^{10} \ joules[/tex]
Thus the above is the correct answer.
We have that the workdone is mathematically given as
W=4.49*10e10 J
From the question we are told
A charge of 0.20uC is 30cm from a point charge of 3.0uC in vacuum. what work is required to bring the 0.2uC charge 18cm closer to the 3.0uC charge?WorkdoneGenerally the equation for the workdone is mathematically given as
W=-kQq/R
Therefore
0.3978/ε0 =-1/(4πε0*(18-30)*3*0.2
Hence
W=4.49*10e10 JFor more information on Charge visit
https://brainly.com/question/9383604
g Three masses are located in the x- y plane as follows: a mass of 6 kg is located at (0 m, 0 m), a mass of 4 kg is located at (3 m, 0 m), and a mass of 2 kg is located at (0 m, 3 m). Where is the center of mass of the system
Answer:
Xcm = (6 * 0 + 4 & 3 + 2 * 0) / 12 = 1
Ycm = (6 * 0 + 4 * 0 + 2 * 3) / 12 = 1/2
(Xcm , Ycm) = (1 , 1/2)
Using definition of center of mass