15.0 L of an ideal gas at 298 K and 3.36 atm are heated to 383 K with a new pressure of 6.35 atm. What is the new volume in liters

Answers

Answer 1

The new volume of the gas is 33.3 L. If 15.0 L of an ideal gas at 298 K and 3.36 atm are heated to 383 K with a new pressure of 6.35 atm.

We can use the combined gas law to solve this problem.which relates to the pressure, volume, and temperature of an ideal gas:

(P1 x V1) / T1 = (P2 x V2) / T2

where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, respectively, and P2, V2, and T2 are the new pressure, volume, and temperature of the gas, respectively.

Substituting the given values, we get:

(3.36 atm x 15.0 L) / 298 K = (6.35 atm x V2) / 383 K

Simplifying and solving for V2, we get:

V2 = (3.36 atm x 15.0 L x 383 K) / (298 K x 6.35 atm)

V2 = 33.3 L

Learn more about combined gas law  here:

https://brainly.com/question/30458409

#SPJ11


Related Questions

Write the balanced net ionic equation for the reaction that occurs when HC2H3O2(aq) and NaOH(aq) are combined.

Answers

The balanced net ionic equation for the reaction that occurs when HC₂H₃O₂(aq) and NaOH(aq) are combined is as follows:

HC₂H₃O₂(aq) + OH⁻(aq) → C₂H₃O₂⁻(aq) + H₂O(l)

The reaction between HC₂H₃O₂(aq) and NaOH(aq) is an acid-base neutralization reaction. HC₂H₃O₂, also known as acetic acid, is a weak acid, while NaOH, or sodium hydroxide, is a strong base. When they combine, they undergo a reaction to form water (H₂O) and the salt sodium acetate (NaC₂H₃O₂). Here's the balanced molecular equation for this reaction:

HC₂H₃O₂(aq) + NaOH(aq) → NaC₂H₃O₂(aq) + H₂O(l)

To write the net ionic equation, we first need to consider the species that will be dissociated into ions in the aqueous solution. Strong electrolytes, like NaOH, completely dissociate in water, while weak electrolytes, such as HC₂H₃O₂, only partially dissociate. Thus, the ionic equation is:

HC₂H₃O₂(aq) + Na⁺(aq) + OH⁻(aq) → Na⁺(aq) + C₂H₃O₂⁻(aq) + H₂O(l)

In this reaction, the sodium ion (Na⁺) is a spectator ion, as it doesn't participate in the reaction. We can eliminate it from the equation to obtain the net ionic equation:

HC₂H₃O₂(aq) + OH⁻(aq) → C₂H₃O₂⁻(aq) + H₂O(l)

This net ionic equation represents the reaction between acetic acid and sodium hydroxide, resulting in the formation of acetate ion and water.

To know more about net ionic equation, refer to the link below:

https://brainly.com/question/22885959#

#SPJ11

The major source(s) of chloroflurocarbons in the atmosphere is/are A. refrigerants, solvents, and spray propellants B. microbial fermentation of organic mater in coal mines, oil wells, and livestock C. emissions from automobiles and chemical fertilizers D. combustion of fossil fuels

Answers

The major source(s) of chlorofluorocarbons (CFCs) in the atmosphere is/are A. refrigerants, solvents, and spray propellants

CFCs were widely used in the past as cooling agents in refrigeration and air conditioning systems, as solvents in cleaning processes, and as propellants in aerosol products like spray paints and deodorants. They are potent greenhouse gases, contributing to the depletion of the ozone layer and climate change. Due to their harmful environmental effects, the production and use of CFCs have been significantly reduced through international agreements like the Montreal Protocol.

Alternative substances with less environmental impact have been developed to replace CFCs in various applications. The other options mentioned (B, C, and D) are not major sources of CFCs; they primarily contribute to other types of air pollution and greenhouse gas emissions. So therefore the major source(s) of chlorofluorocarbons (CFCs) in the atmosphere is/are A. refrigerants, solvents, and spray propellants

To learn more about CFCs here:

https://brainly.com/question/10583810

#SPJ11

From the following statements, choose which is(are) true. I. At equilibrium, the concentrations of reactants and products are equal. II. At equilibrium, the concentrations of the reactants and products do not change over time. III. At equilibrium, the rates of the forward and reverse reactions are equal. IV. At equilibrium, the chemical reaction has stopped.

Answers

The true statements are II and III.

I. At equilibrium, the concentrations of reactants and products are equal. This statement is false because the concentrations of reactants and products may be different at equilibrium. What remains constant is the ratio of their concentrations, not the concentrations themselves.

II. At equilibrium, the concentrations of the reactants and products do not change over time. This statement is true because, at equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction, which leads to a constant concentration of reactants and products.

III. At equilibrium, the rates of the forward and reverse reactions are equal. This statement is true because, at equilibrium, the system has reached a state where both reactions occur at the same rate, maintaining a constant concentration of reactants and products.

IV. At equilibrium, the chemical reaction has stopped. This statement is false because, at equilibrium, the reaction is still occurring. However, the forward and reverse reactions are happening at the same rate, resulting in no net change in the concentrations of reactants and products.

To know more about equilibrium, visit:

https://brainly.com/question/30694482

#SPJ11

A glucose solution that is prepared for a patient should have a concentration of 180 g/L. A nurse has 18 g of glucose. How many liters of water should she add to the glucose to obtain the required solution?
0.010L
0.10L
3.2L
10.L

Answers

3.2L of water she should add to the glucose to obtain the required solution. Option 3 is correct.

To find out how much water should be added to the 18 g of glucose to obtain a glucose solution with a concentration of 180 g/L, we can use the formula:

C1V1 = C2V2

where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

In this case, we know that C1 = 18 g/L, C2 = 180 g/L, and V1 = unknown (since we don't know how much water to add). We want to find V2, which represents the total volume of the final solution.

Rearranging the formula, we get:

V2 = (C1/C2) * V1V2 = (18 g/L) / (180 g/L) * V1V2 = 0.1 * V1

We know that the final volume should be the sum of the volumes of glucose and water, so we can write:

V2 = V1 + V_water

Substituting V2 = 0.1V1 and solving for V_water, we get:

V_water = V2 - V1V_water = 0.1V1 - V1V_water = -0.9V1

Since V_water cannot be negative, we know that V1 must be greater than 0. Dividing both sides by -0.9, we get:

V1 = V_water / -0.9V1 = -3.56 L / -0.9V1 = 3.96 L

However, we only need to add water to the glucose, so the actual volume of water to add is:

V_water = V2 - V1V_water = 3.2 L

Therefore, the nurse should add 3.2 liters of water to the 18 g of glucose to obtain the required solution. Hence Option 3 is correct.

To learn more about solutions, here

https://brainly.com/question/30665317

#SPJ1

Suppose 0.540 mol of electrons must be transported from one side of an electrochemical cell to another in minutes. Calculate the size of electric current that must flow. Be sure your answer has the correct unit symbol and round your answer to significant digits.

Answers

I = 435 A (to three significant digits). To calculate the size of the electric current, we need to use Faraday's constant, which relates the amount of charge transferred to the number of moles of electrons involved in the reaction.

One mole of electrons represents a charge of 96,485 C (coulombs), which is equal to Faraday's constant (F).
Therefore, the amount of charge transferred in this case is:
0.540 mol x F = 52,126 C
Since the time is given in minutes, we need to convert it to seconds:
t = 2 minutes x 60 seconds/minute = 120 seconds
Finally, the electric current (I) is given by:
I = Q/t = 52,126 C / 120 s = 435 A
The unit symbol for electric current is "A" (ampere).
We need to round the answer to the correct number of significant digits, which is three, because the original value 0.540 has three significant digits.
Therefore, the final answer is:
I = 435 A (to three significant digits).

Learn more about Faraday's constant here: brainly.com/question/31604460

#SPJ11

Changing conformation at the active site as a result of binding a substance at a different site is known as ________.

Answers

Changing conformation at the active site as a result of binding a substance at a different site is known as allosteric regulation.

Allosteric regulation plays a crucial role in controlling various biological processes and maintaining cellular functions, it involves the binding of an effector molecule at a site other than the active site, which is the allosteric site. This binding event induces a conformational change in the protein structure, resulting in either activation or inhibition of the enzyme's activity. The conformational change can either enhance or reduce the enzyme's affinity for its substrate, ultimately influencing the rate of reaction. Allosteric regulation allows enzymes to fine-tune their functions and respond to changes in cellular conditions.

It is an essential mechanism for maintaining cellular homeostasis, as it provides a means to regulate and coordinate various metabolic pathways. There are two types of allosteric effectors: positive and negative and the positive effectors enhance the enzyme's activity, while negative effectors inhibit it. Allosteric regulation is vital for the proper functioning of numerous enzymes and cellular processes, including cellular signaling, gene expression, and metabolic regulation. By providing a dynamic way to control enzyme activity, allosteric regulation allows cells to adapt and respond efficiently to their ever-changing environment. So therefore changing conformation at the active site as a result of binding a substance at a different site is known as allosteric regulation.

To learn more about enzyme here:

https://brainly.com/question/29774898

#SPJ11

Spectrophotometers compare the light transmitted through a sample to the light transmitted through A. a heated sample B. a blank

Answers

Spectrophotometers are analytical instruments that are widely used in chemistry, biochemistry, and other scientific fields to measure the concentration of a substance in a sample. These instruments work by comparing the amount of light transmitted through a sample to the amount of light transmitted through a reference material, known as a blank.

The blank is typically a solution that is identical to the sample in every way except that it does not contain the substance being measured. By comparing the light transmitted through the blank to the light transmitted through the sample, spectrophotometers can determine the amount of light absorbed by the substance being measured.
The blank is essential in spectrophotometry because it allows the instrument to account for any variations in the light source, the instrument, or the sample container. Without a blank, any changes in the light source or the instrument itself could lead to erroneous results. Similarly, any contaminants or impurities in the sample container could affect the amount of light transmitted through the sample, making it difficult to accurately measure the concentration of the substance being analyzed.
In summary, spectrophotometers compare the light transmitted through a sample to the light transmitted through a blank in order to accurately measure the concentration of a substance in the sample. The blank is essential for ensuring the accuracy and reliability of the instrument, and it is an important component of any spectrophotometry analysis.

For more such questions  on Spectrophotometers

https://brainly.com/question/24864511

#SPJ11

A certain acid, HA, has a pKa of 8. What is the pH of a solution made by mixing 0.30 mol of HA with 0.20 mol of NaA

Answers

The pH of the solution can be calculated using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]), where [A-] is the concentration of the conjugate base (NaA) and [HA] is the concentration of the acid (HA).  The pH of the solution is 7.8.

First, we need to determine the concentration of each species in the solution. Since we mixed 0.30 mol of HA with 0.20 mol of NaA, we can assume that all of the HA has dissociated into H+ and A-. Therefore, the concentration of [HA] is 0 and the concentration of [A-] is 0.20 mol.
Next, we need to calculate the concentration of [HA] using the dissociation equation: HA ⇌ H+ + A-. Since the acid has a pKa of 8, we can assume that at pH 8, the concentration of [HA] and [A-] are equal. Therefore, we can use the equation [HA] = [A-] = 0.30 mol.
Plugging in these values into the Henderson-Hasselbalch equation, we get:
pH = 8 + log(0.20/0.30) = 7.8
Therefore, the pH of the solution is 7.8.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ11



You find that the CEC of a sandy loam soil at pH 5.0 is 8 cmolc/kg. At pH 8.2, the measured CEC is 14 cmolc/kg. What is the most likely reason for this difference

Answers

The CEC (Cation Exchange Capacity) of a soil is a measure of the soil's ability to hold onto positively charged ions, such as calcium, magnesium, and potassium. The CEC can vary depending on the pH of the soil. In this case, the CEC of a sandy loam soil at pH 5.0 was found to be 8 cmolc/kg, while at pH 8.2, the measured CEC was 14 cmolc/kg. This indicates that the soil has a higher CEC at a higher pH.

The most likely reason for this difference in CEC is due to the influence of soil pH on the ionization of soil particles. At a lower pH, soil particles tend to be positively charged, which can limit their ability to hold onto cations. However, at a higher pH, soil particles become negatively charged, which increases their ability to hold onto cations.

This phenomenon is known as soil buffering, where the pH of the soil is controlled by the ability of soil particles to absorb or release hydrogen ions. As the pH of the soil increases, more negative charges are generated on the soil particles, allowing them to bind more positively charged ions.

Therefore, it is important to consider the pH of the soil when evaluating its CEC. By understanding how soil pH affects the CEC of a soil, farmers and researchers can optimize soil fertility and crop yield by adjusting the soil pH accordingly.

to know more about  CEC (Cation Exchange Capacity) click this link -

brainly.com/question/31461178

#SPJ11

write a simple ordinary differential equation that describes the concentration of contamination g

Answers

Answer:

Here's a simple ordinary differential equation that describes the concentration of contamination, g:

dg/dt = -k*g

Where g is the concentration of contamination, t is time, and k is a constant representing the rate of decay of the contamination.

Explanation:

This equation states that the rate of change of contamination concentration with respect to time is proportional to the current concentration of contamination

With a negative sign indicating that the concentration is decreasing over time due to the decay process. The larger the value of k, the faster the contamination concentration will decay.

To know more on contamination concentration ,

https://brainly.com/question/17770952#

#SPJ11

the initial volume of the bubbles in a divers blood is 15ML and the initial pressure is 12.75 atm. what temp are they

Answers

The volume of the bubbles when the diver has surfaced to 1.00 atm pressure is 192 mL.

The amount of three-dimensional space that matter occupies is quantified by a physical quantity called volume. It is a derived quantity that draws its foundation from the length unit. The cubic metre is the SI unit, however litres, millilitres, ounces, and gallons are all frequently used volume units. Chemistry requires a volume definition since the discipline typically works with liquid substances, mixtures, and reactions that need for a specific amount of liquids.

Capacity and volume are frequently used interchangeably. The two quantities are connected, yet they are still distinct from one another. Volume is the amount of space an object takes up, whereas capacity is the quality of a container, especially the amount of liquid it can store.

At constant temperature,

P1V1 = P2V2

Thus, [tex]V_2=\frac{P_1V_1}{P_2}[/tex]

V2 = 12.75 x 15/1 = 191.25 ≈ 192 mL.

Therefore, volume of the bubbles when the diver has surfaced to 1.00 atm pressure is 192 mL.

Learn more about Volume:

https://brainly.com/question/10830111

#SPJ4

Complete question:

If the initial volume of the bubbles in a diver's blood is 15 mL and the initial pressure is 12.75 atm, what is the volume of the bubbles when the diver has surfaced to 1.00 atm pressure?

How many grams of Na2CO3 are present in 21.0 mL of a solution that is 39.0% Na2CO3 by mass? The density of the solution is 1.05 g/mL.

Answers

The first step in solving this problem is to find the mass of the solution, which can be calculated using its volume and density:

mass = volume × density

mass = 21.0 mL × 1.05 g/mL

mass = 22.05 g

Next, we can use the percentage of Na2CO3 by mass to find the mass of Na2CO3 present in the solution:

mass of Na2CO3 = 39.0% × mass of solution

mass of Na2CO3 = 39.0% × 22.05 g

mass of Na2CO3 = 8.60 g

Therefore, there are 8.60 grams of Na2CO3 present in 21.0 mL of the solution.

To know more about mass percentage, click here:-

https://brainly.com/question/31430784

#SPJ11

A current sample of carbon of mass 1.00 g shows 921 disintegrations per hour. If 1.00 g of charcoal from an archaeological dig in a limestone cave in Slovenia shows disintegrations in 24.0 h, what is the age of the charcoal sample

Answers

The age of the charcoal sample is approximately 3.17 x [tex]10^7 years.[/tex]

To determine the age of the charcoal sample, we can use the following equation:

t = ln(N/N0) / k

where t is the age of the sample in years, N is the number of disintegrations per unit time (usually expressed in units of disintegrations per minute, or dpm), N0 is the initial number of disintegrations per unit time, and k is the decay constant.

We are given that the current sample of carbon has 921 disintegrations per hour, so the initial number of disintegrations per unit time (N0) can be calculated as follows:

N0 = dpm/t

where dpm is the disintegration rate of the sample, which is the number of disintegrations per unit time.

We are also given that the charcoal sample from the archaeological dig in Slovenia has 24.0 disintegrations per hour. The disintegration rate of the charcoal sample can be calculated as follows:

dpm = N / t

where dpm is the disintegration rate of the sample, N is the number of disintegrations per unit time, and t is the time in hours.

We can use these equations to solve for t, which is the age of the charcoal sample in years:

t = ln(921/24) / k

t = ln(38.25) / 0.000112

t ≈ [tex]3.17 x 10^7 years[/tex]

Therefore, the age of the charcoal sample is approximately 3.17 x [tex]10^7[/tex] years.

To learn more about decay:

https://brainly.com/question/30025725

#SPJ4

. If you add boiling water to a cup at room temperature, what would you expect the final equilibrium temperature of the unit to be

Answers

When you add boiling water to a cup at room temperature, you would expect the final equilibrium temperature of the unit to be somewhere between the initial temperature of the cup and the temperature of the boiling water.

The final equilibrium temperature of the unit will depend on a number of factors, including the initial temperature of the cup, the amount of boiling water added, and the rate of heat transfer between the water and the cup.

Assuming the cup is at room temperature, which is typically around 20-25 degrees Celsius, and the boiling water is at 100 degrees Celsius, the final equilibrium temperature will likely be somewhere in the range of 25-100 degrees Celsius.

This is because heat will transfer from the hotter water to the cooler cup until they reach thermal equilibrium or the same temperature. The rate of heat transfer will depend on the materials and properties of the cup and the water, as well as any other factors that may impact the process.

Factors that could impact the final equilibrium temperature include the size and shape of the cup, the type of material it is made from, the amount of boiling water added, and any insulation or other barriers that may affect the rate of heat transfer.

To know more about thermal equilibrium visit:

https://brainly.com/question/31270337

#SPJ11

When a 16.6 mL sample of a 0.329 M aqueous hydrocyanic acid solution is titrated with a 0.437 M aqueous potassium hydroxide solution, what is the pH after 18.7 mL of potassium hydroxide have been added

Answers

The pH of the solution after 18.7 mL of potassium hydroxide have been added is 10.96.

Explanation:

To calculate the pH of the solution ,

The titration reaction between hydrocyanic acid and potassium hydroxide can be represented as follows:

HCN(aq) + KOH(aq) → KCN(aq) + H2O(l)

At the equivalence point, all of the hydrocyanic acid will have reacted with the potassium hydroxide, leaving only potassium cyanide and water in solution.

This means that the moles of hydrocyanic acid initially present in the sample can be calculated from the volume and concentration of the hydroxide solution added up to the equivalence point.

The remaining moles of hydroxide can then be used to calculate the pH of the solution after the equivalence point has been reached.

Initial moles of HCN = (0.329 M) x (16.6 mL / 1000 mL) = 0.00546 moles HCN

Moles of KOH added at equivalence point = (0.437 M) x (18.7 mL / 1000 mL) = 0.00818 moles KOH

Since the stoichiometric ratio between hydrocyanic acid and potassium hydroxide is 1:1, the number of moles of hydrocyanic acid that react with the added potassium hydroxide at the equivalence point is also 0.00818 moles.

The total volume of the solution at the equivalence point is the sum of the volumes of the hydrocyanic acid solution and the added potassium hydroxide solution:

Veq = 16.6 mL + 18.7 mL = 35.3 mL = 0.0353 L

The concentration of potassium cyanide at the equivalence point can be calculated from the moles of potassium cyanide produced and the volume of the solution:

[C] = moles / volume = 0.00818 moles / 0.0353 L = 0.232 M

The reaction between potassium cyanide and water can be written as:

KCN(aq) + H2O(l) ⇌ KOH(aq) + HCN(aq)

The equilibrium constant for this reaction can be calculated using the ionization constant of hydrocyanic acid:

Ka = [H+][CN-] / [HCN]

Ka = 4.9 × 10^-10 (at 25°C)

[H+] = (Ka x [HCN]) / [CN-] = (4.9 × 10^-10 x 0.00528) / 0.232 = 1.1 × 10^-11 M

pH = -log[H+] = -log(1.1 × 10^-11) = 10.96

TO KNOW MORE ON   pH ,

https://brainly.com/question/15289741#

#SPJ11

What would be the effect on measured cell potential if some solution in one well spilled over and mixed with that in the other well

Answers

If some solution in one well of a cell spills over and mixes with that in the other well, it will cause contamination of the solution in the other well, and the measured cell potential will be affected.

The spill-over may change the concentrations of the reactants and products in the half-cells, causing a shift in the equilibrium of the redox reaction taking place in the cell. This shift in the equilibrium will alter the cell potential, leading to an inaccurate measurement.

Additionally, if the spilled solution is an electrolyte, it may react with the solution in the other well, resulting in the formation of additional products or reactants that were not present in the original solution.

This will also affect the measured cell potential. Therefore, it is important to be careful when handling and transporting cells to prevent such spills and contamination.

To know more about the cell spills refer here :

https://brainly.com/question/29851741#

#SPJ11

if two different radioisotopes a and b have the same activity but the half-life of isotope ais larger than the half-life of isotope b, what is the relative magnitude of the numbers of radioactive nuclei of isotope a to isotope b

Answers

The number of radioactive nuclei of isotope A is larger than the number of radioactive nuclei of isotope B.

What is Isotope?

An isotope is a variant of a chemical element that has the same number of protons but a different number of neutrons in its atomic nucleus. This means that isotopes of the same element have the same atomic number (i.e., the same number of protons in the nucleus) but different atomic masses due to the varying number of neutrons.  

The activity of a radioactive substance is defined as the rate at which its nuclei decay, and is measured in units of becquerels (Bq) or curies (Ci). The half-life of a radioactive isotope is the time it takes for half of the radioactive nuclei in a sample to decay. Therefore, if two different radioisotopes A and B have the same activity, it means they are decaying at the same rate, but if the half-life of isotope A is larger than the half-life of isotope B, then isotope A has more radioactive nuclei than isotope B.

To know more about Isotope, visit;

https://brainly.com/question/364529

#SPJ4

Someone steps on your toe, exerting a force of 200 N on an area of 1.0 cm2 . What is the average pressure on that area in atm

Answers

The average pressure exerted on the toe is approximately 19.74 atm.

To calculate the average pressure on the area in atm, we need to first convert the force and area to their respective SI units and then apply the pressure formula.

Force: 200 N (already in SI units)

Area: 1.0 cm² = 0.0001 m² (conversion: 1 cm² = 0.0001 m²)

Pressure formula: Pressure = Force / Area

Pressure (in pascals) = 200 N / 0.0001 m² = 2,000,000 Pa

Now, we need to convert the pressure from pascals to atmospheres (atm):

1 atm = 101325 Pa

Pressure (in atm) = 2,000,000 Pa / 101325 Pa/atm ≈ 19.74 atm

So, the average pressure on that area when someone steps on your toe with a force of 200 N is approximately 19.74 atm.

To know more about pressure click on below link :

https://brainly.com/question/16789304#

#SPJ11

A mixture of O2 and He gas is 92.3% by mass O2. What is the partial pressure of O2 if the total pressure is 745 Torr

Answers

The partial pressure of O2 in the mixture is 446 Torr.

To find the partial pressure of O2 in a mixture, we need to use the mole fraction of O2 and the total pressure of the mixture.

The mole fraction of O2 (XO2) is the ratio of the moles of O2 to the total moles of gas in the mixture:

XO2 = moles of O2 / total moles of gas

We can find the moles of O2 by dividing the mass of O2 by its molar mass:

moles of O2 = mass of O2 / molar mass of O2

Similarly, we can find the moles of He in the mixture by dividing the mass of He by its molar mass:

moles of He = mass of He / molar mass of He

The total moles of gas in the mixture is the sum of the moles of O2 and He:

total moles of gas = moles of O2 + moles of He

Now we can find the mole fraction of O2:

XO2 = moles of O2 / total moles of gas

We are given that the mixture is 92.3% by mass O2, which means that 7.7% of the mass is due to He.

Therefore, we can assume that we have 100 g of the mixture, of which 92.3 g is O2 and 7.7 g is He.

The molar mass of O2 is 32 g/mol and the molar mass of He is 4 g/mol. Using these values, we can calculate the moles of O2 and He in the mixture:

moles of O2 = 92.3 g / 32 g/mol = 2.884 mol

moles of He = 7.7 g / 4 g/mol = 1.925 mol

The total moles of gas in the mixture is:

total moles of gas = moles of O2 + moles of He = 2.884 mol + 1.925 mol = 4.809 mol

Now we can find the mole fraction of O2:

XO2 = moles of O2 / total moles of gas = 2.884 mol / 4.809 mol = 0.5999

The partial pressure of O2 can be found by multiplying the mole fraction of O2 by the total pressure of the mixture:

partial pressure of O2 = XO2 * total pressure = 0.5999 * 745 Torr = 446 Torr

to know more about  partial pressure refer here:

https://brainly.com/question/31214700#

#SPJ11

Gallium is produced by the electrolysis of a solution made by dissolving gallium oxide in concentrated NaOH(aq). Calculate the amount of Ga(s) that can be deposited from a Ga(III) solution using a current of 0.360 A that flows for 90.0 min.

Answers

The amount of Ga(s) that can be deposited from a Ga(III) solution using a current of 0.360 A that flows for 90.0 min is 0.469 g.

To calculate the amount of Ga(s) that can be deposited, we need to use Faraday's law of electrolysis which states that the amount of substance deposited is directly proportional to the amount of electricity passed through the solution.

First, we need to determine the charge passed through the solution using the current and time given:

Charge (Q) = current (I) x time (t)
Q = 0.360 A x 90.0 min x 60 s/min = 1944 C

Next, we need to convert the charge to moles of electrons using Faraday's constant:

1 mole of electrons = 96500 C
moles of electrons = Q / 96500
moles of electrons = 1944 C / 96500 C/mol = 0.0202 mol

Since each Ga(III) ion requires 3 moles of electrons to be reduced to Ga(s), we need to multiply the moles of electrons by 1/3 to get the moles of Ga(s) deposited:

moles of Ga(s) = 0.0202 mol x 1/3 = 0.00673 mol

Finally, we can calculate the mass of Ga(s) deposited using its molar mass:

molar mass of Ga = 69.72 g/mol
mass of Ga(s) = moles of Ga(s) x molar mass of Ga
mass of Ga(s) = 0.00673 mol x 69.72 g/mol = 0.469 g

Therefore, the amount of Ga(s) that can be deposited from a Ga(III) solution using a current of 0.360 A that flows for 90.0 min is 0.469 g.

To know more about electrochemical cell:

https://brainly.com/question/26227363

#SPJ11

If 9.11 mL of 0.106 M sodium hydroxide is required to titrate the acetylsalicylic acid in an aspirin tablet, how many milligrams of acetylsalicylic acid are in the tablet

Answers

The mass of acetylsalicylic acid in the tablet is 174 mg. If 9.11 mL of 0.106 M sodium hydroxide is required to titrate the acetylsalicylic acid in an aspirin tablet.

In order to calculate the mass of acetylsalicylic acid in the tablet, we need to use the balanced chemical equation for the reaction between sodium hydroxide and acetylsalicylic acid:

C9H8O4 + NaOH → NaC9H7O4 + H2O

From the equation, we can see that 1 mole of NaOH reacts with 1 mole of acetylsalicylic acid. Therefore, we can calculate the number of moles of acetylsalicylic acid in the tablet using the volume and concentration of NaOH used in the titration:

moles of NaOH = volume of NaOH (in L) x concentration of NaOH (in mol/L)

moles of NaOH = 9.11 mL / 1000 mL/L x 0.106 mol/L

moles of NaOH = 0.000966 mol

Since 1 mole of NaOH reacts with 1 mole of acetylsalicylic acid, the number of moles of acetylsalicylic acid in the tablet is also 0.000966 mol. Finally, we can calculate the mass of acetylsalicylic acid in the tablet using its molar mass:

mass of acetylsalicylic acid = moles of acetylsalicylic acid x molar mass of acetylsalicylic acid

mass of acetylsalicylic acid = 0.000966 mol x 180.16 g/mol

mass of acetylsalicylic acid = 0.174 g or 174 mg

Learn more about acetylsalicylic acid here:

https://brainly.com/question/13188890

#SPJ11

Write the full electron configuration for a Ca ion. electron configuration: Write the full electron configuration for an O ion. electron configuration

Answers

Which makes it stable like the noble gas neon (with the same electron configuration, but with two fewer electrons).

Why will be the full electron configuration for an O ion?

Sure, here are the full electron configurations for a [tex]Ca[/tex] ion and an [tex]O[/tex] ion:

Ca ion: A [tex]Ca[/tex] ion has lost two electrons from its neutral atom, so its electron configuration is written as [tex][Ar] 4s^0[/tex]. The notation [[tex]Ar[/tex]] indicates that the 18 electrons of the previous noble gas, Argon ([tex]Ar[/tex]), remain in their respective shells, and the remaining two electrons that were originally in the 4s orbital of the neutral [tex]Ca[/tex] atom have been removed.

O ion: An [tex]O[/tex] ion has gained two electrons to become negatively charged, so its electron configuration is written as [tex]1s^2 2s^2 2p^6[/tex]. This configuration shows that oxygen now has a full valence shell (8 electrons in total),

Learn more about electron configuration

brainly.com/question/29757010

#SPJ11

What are the respective concentrations (M) of Mg 2 and C 2H 3O 2 - afforded by dissolving 0.600 mol Mg(C 2H 3O 2) 2 in water and diluting to 135 mL

Answers

The concentration of Mg²⁺ ions is 8.89 M and the concentration of C₂H₃O₂⁻ ions is 17.8 M in the solution.

Assuming complete dissociation of Mg(C₂H₃O₂)₂ in water, we can use stoichiometry to determine the concentrations of Mg²⁺ and C₂H₃O₂⁻ ions in the solution.

First, we need to calculate the total number of moles of ions produced by dissolving 0.600 mol Mg(C₂H₃O₂)₂ in water;

0.600 mol Mg(C₂H₃O)₂ x 2 mol ions per mole of Mg(C₂H₃O₂)₂

= 1.20 mol ions

Since the volume of the solution is 135 mL = 0.135 L, we can calculate the concentrations of the ions;

[Mg²⁺] = 1.20 mol / 0.135 L = 8.89 M

[C₂H₃O₂⁻] = 2 x 1.20 mol / 0.135 L

= 17.8 M

Therefore, the concentration of Mg²⁺ ions and C₂H₃O₂⁻ ions is;  8.89 M and 17.8 M.

To know more about complete dissociation here

https://brainly.com/question/31145781

#SPJ4

What mass of iodine, I2 (molar mass 253.80 g/mol), must be used to prepare a 0.960 m solution if 100.0 g of ethanol, C2H5OH, is used

Answers

To prepare a 0.960 m solution using 100.0 g of ethanol, we need 243.65 g of iodine.

To determine the mass of iodine needed to prepare a 0.960 m solution using 100.0 g of ethanol, we first need to calculate the number of moles of ethanol present:
moles of ethanol = mass of ethanol / molar mass of ethanol
moles of ethanol = 100.0 g / 46.07 g/mol
moles of ethanol = 2.17 mol
Next, we can use the molarity equation to calculate the number of moles of iodine needed for the solution:
molarity = moles of solute / liters of solution
Since we don't know the volume of the solution, we can assume it is 1 liter to make the calculation easier. Therefore:0.960 m = moles of iodine / 1 L
moles of iodine = 0.960 mol
Finally, we can use the number of moles of iodine needed to calculate the mass of iodine required:
mass of iodine = moles of iodine x molar mass of iodine
mass of iodine = 0.960 mol x 253.80 g/mol
mass of iodine = 243.65 g

Learn more about solution: https://brainly.com/question/30665317

#SPJ11

solution containing a mixture of metal cations was treated as outlined. Dilute HCl was added and no precipitate formed. H2S was bubbled through the acidic solution. A precipitate formed and was filtered off. The pH was raised to about 9 and H2S was again bubbled through the solution. A precipitate formed and was filtered off. Finally, sodium carbonate was added to the filtered solution. A precipitate formed and was filtered off. What can be said about the presence of each of these groups of cations in the original solution

Answers

Based on the results of the qualitative analysis scheme, the original solution likely contained Group 2, Group 3, and Group 4 cations.

The procedure described is a common qualitative analysis scheme used to identify the presence of different groups of metal cations in a mixture.

The fact that no precipitate formed when dilute HCl was added suggests that none of the cations present form insoluble chlorides under acidic conditions. This rules out the presence of the Group 1 cations, which include [tex]Ag^+, Hg_2^{2+}, and Pb^{2+}[/tex].

The formation of a precipitate upon bubbling [tex]H_2S[/tex] through the acidic solution suggests the presence of Group 2 cations, which include [tex]Cd^{2+}, Cu^{2+}, Hg^{2+}, Pb^{2+}, Bi^{3+}, and \ As^{3+}[/tex]. The precipitate formed is likely to be a mixture of metal sulfides, which are insoluble in water.

The fact that a second precipitate forms when [tex]H_2S[/tex] is bubbled through the basic solution suggests the presence of Group 3 cations, which include [tex]Fe^{3+}, Al^{3+}, and \ Cr^{3+}[/tex]. These cations form insoluble sulfides under basic conditions.

The formation of a final precipitate upon adding sodium carbonate suggests the presence of Group 4 cations, which include [tex]Ca^{2+}, Ba^{2+}, and \ Sr^{2+}[/tex]. These cations form insoluble carbonates in basic solutions.

For more question on qualitative analysis click on

https://brainly.com/question/31035679

#SPJ11

The cyclic form of sugars: Group of answer choices has one more chiral center (the anomeric carbon) than the open-chain form. is not usually found in nature. loses a chiral center compared to the open-chained form. can have two possible forms, designated R and S.

Answers

The cyclic form of sugars A ) has one more chiral center, known as the anomeric carbon, compared to the open-chain form.

This is because the cyclic form involves the reaction between the carbonyl group and a hydroxyl group, resulting in the formation of a hemiacetal or hemiketal. However, the cyclic form is actually very common in nature, as many sugars exist in this form in solution or in living organisms.

The configuration of the anomeric carbon can be designated as R or S, depending on the orientation of the substituents around the chiral center. Therefore, the statement "loses a chiral center compared to the open-chained form" is incorrect, as the cyclic form actually introduces an additional chiral center.

Therefore, the correct answer is option A.

To know more about sugars click on below link :

https://brainly.com/question/30738818#

#SPJ11

COMPLETE QUESTION:

The cyclic form of sugars:

A) has one more chiral center (the anomeric carbon) than the open-chain form.

B) is not usually found in nature.

C) can have two possible forms, designated R and S.

D) loses a chiral center compared to the open-chained form.

Suppose Sam prepares a solution of 1 g of sugar in 100 mL of water and Ash prepares a solution of 2 g of sugar in 100 mL of water. Who made the more concentrated solution

Answers

Ash made the more concentrated solution as it contains a higher amount of sugar (2 g) in the same volume of water (100 mL) compared to Sam's solution with only 1 grm of sugar in the same volume.

In this scenario, Ash prepared the more concentrated solutions. Here's a step-by-step explanation:
1. Sam prepared a solution by dissolving 1 g of sugar in 100 mL of water. To determine the concentration, we can use the formula: Concentration = Mass of solute / Volume of solvent. In Sam's case,

the concentration is \frac{1 g }{ 100 mL} = 0.01 g/mL.
2. Ash prepared a solution by dissolving 2 g of sugar in 100 mL of water. Using the same concentration formula, we find that Ash's solution has a concentration of \frac{ 2 g }[100 mL} = 0.02 g/mL.
3. To compare the two solutions, we look at their concentrations. Sam's solution has a concentration of 0.01 g/mL, while Ash's solution has a concentration of 0.02 g/mL.
4. Since 0.02 g/mL is greater than 0.01 g/mL, we can conclude that Ash's solution is more concentrated than Sam's solution.

learn more about concentrated solutions Refer: https://brainly.com/question/30956529

#SPJ11

What is the effect on pressure if the volume of a gas sample doubles yet the temperature of the sample decreases by half

Answers

The pressure of the gas sample would remain the same since PV is equal to (n)(R)(T) and the number of moles and gas constant is constant for a given sample of gas.

If the volume of a gas sample doubles, the new volume would be 2V. However, if the temperature of the gas sample decreases by half, the new temperature would be T/2.

Substituting these values into the ideal gas law, we get:

(P)(2V) = (n)(R)(T/2)

Simplifying the equation, we get:

PV = (n)(R)(T)

A mole is a unit of measurement used to express the amount of a substance present in a sample. Specifically, a mole represents the amount of substance that contains as many elementary entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12.

The value of a mole is approximately 6.022 x [tex]10^{23[/tex]known as Avogadro's number. This means that one mole of a substance contains 6.022 x [tex]10^{23[/tex] particles. The mole is commonly used in calculations involving chemical reactions and stoichiometry. For example, if you have the mass of a substance and its molar mass (the mass of one mole of the substance), you can calculate the number of moles of that substance present in the sample.

To learn more about Moles visit here:

brainly.com/question/31597231

#SPJ4

n simple terms, sucrase _______. Multiple Choice joins glucose and fructose together to form sucrose forms a disaccharide from a monosaccharide breaks down sucrose into glucose and fructose makes sucrose from hydrogen, oxygen, and carbon atoms

Answers

Sucrase breaks down sucrose into glucose and fructose. The correct answer is option C.

An enzyme called sucrase is responsible for hydrolyzing sucrose into glucose and fructose. The small intestine produces sucrase, which catalyzes the breakdown of sucrose into glucose and fructose which are then absorbed by the small intestine and then carried through the portal vein to the liver, where it is then distributed to all tissues. This enzyme is responsible for the majority of the sugar absorption in the body.

Sucrase enzymes are also present in other body organs, including the liver, where they aid in the conversion of sugars into energy. A pH range between 4.5 to 7.0 is where the intracellular sucrase exhibits almost 80% of its activity.

Therefore, option C is the correct answer.

The question should be:

In simple terms sucrase

A) joins glucose and fructose together to form sucrose.

B) forms a disaccharide from a monosaccharide.

C) breaks down sucrose into glucose and fructose

D) makes sucrose from hydrogen, oxygen, and carbon atoms.

To learn more about sucrase visit:

https://brainly.com/question/2545618

#SPJ11

A sample of N2 gas (2.0 mmol) effused through a pinhole in 5.5 s. It will take __________ s for the same amount of CH4 to effuse under the same conditions.

Answers

A sample of N₂ gas (2.0 mmol) effused through a pinhole in 5.5 s. It will take 4.2s for the same amount of CH₄ to effuse under the same conditions.

A substance can travel from an area of high concentration to an area of low concentration, a phenomenon known as diffusion. This indicates that molecules or particles disperse across the medium. If you spray, for instance, at one end of the room, you can smell it at the other. Due to the diffusion phenomena, this has happened.

Graham's law connects the rates of effusion (RoE) of two gases and their molar masses (M):

[tex]\frac{R_0E(A)}{R_0E(B)} =\sqrt{\frac{M(B)}{M(A)} }[/tex]

We can calculate the RoE for N₂ by using the given number of moles (n = 2.0 mol) and time (t = 5.5 s) needed for it to effuse:

RoE(N₂) = n/t

RoE(N₂) = 2.0 mmol / 5.5 s

RoE(N₂) = 0.36 mmol/s

Now, we can use the molar masses of nitrogen (M = 28 g/mol) and methane (M = 16 g/mol) to calculate the RoE(CH₄):

[tex]R_oE(CH_4)=\frac{0.36}{\sqrt{\frac{16}{28} } }[/tex]

RoE(CH₄) = 0.48 mmol/s

Now we can use this to calculate the time 2.0 mmol of methane will require:

t = n(CH₄) / RoE(CH₄)

t = 2.0 mmol / 0.48 mmol/s

t = 4.2 s.

Learn more about Sample of N₂:

https://brainly.com/question/29107716

#SPJ4

Other Questions
The ________ requires all contracts for the sale of goods costing $500 or more and lease contracts involving payments of $1,000 or more to be in writing. A. parol evidence rule B. open price term C. firm offer rule D. Statute of Frauds Show that the normal line at any point of the circle x^2+y^2 = a^2 passes through the origin. What is the present value of a payment of $200 to be made one year from today if the interest rate is 10 percent According to Classical economists, which type of fiscal policy financing produces a decline in private investment expenditures due to higher real interest rates? Out of 50 students taking a midterm psychology exam, 26 answered the first of two bonus questions, 33 answered the second bonus question, and 2 didn't bother with either Who is principle entity responsible for implementation for health care IT standards for interoperability 24.2 starting with ficks rate equation for the diffusion of a through a binary mixture of components a and b, prove a. nanbcv b. nanbrv c. jajb0 Assume a company sold 50 units in Year 1 and 80 units in Year 2. The percentage change in units sold from Year 1 to Year 2 is ______. Consider an A36 steel section (let's say a W-shape) used as a steel column in a certain structural application. A normal service load of 108 kips is expected on this column during its service life. Using load and resistance factor design (LRFD), it is determined that the minimum cross-sectional area required for this steel section to safely carry the service load is 6 in2 . If a load factor of 1.5 was used in the LRFD of this column, the resistance factor was: How would a visual effects designer working on an animated movie with human characters best use knowledge of biology? (1 point) The carbon-14 dating method can be used to determine the age of a ________. stone axe head clay pot flint arrowhead rock papyrus scroll [20 pts] determine the maximum deflection and maximum slope of the cantilevered beam use e = 200 gpa and i = 65.0 x 106 mm4 PLEASE HELPA LOT OF POINTS Insertion sort can be improved by using binary search to find the next insertion point. However, this does not change the overall complexity of the algorithm. Why how does the speed of the vertically launched sphere compare to the speed of the horizonally launched sphere as they hit the dloor In a Random Forest model, each tree is fitted using: Group of answer choices A few randomly chosen rows and randomly chosen columns All predictors and all rows A few randomly chosen rows and all columns All rows and randomly chosen columns The postInvalidate method of the View class that has no parameter triggers a call to the __________________ method and refreshes the whole View. Second mortgage loans in which borrowers borrow against the accumulated equity in their home are more commonly referred to as: Multiple Choice piggyback mortgage. purchase-money mortgage (PMM). home equity loan. reverse mortgage. If the Vikings had a _____ worldview, they would have protected the forests and grasslands not just for the resources provided but also for the natural processes in those areas. Find the probability that a 13-card hand (from a 52-card deck) has exactly 3 three-of-a-kinds (no 4-of-akinds and no pairs).