Answer:
Add the computer case to the Workspace.
Install the motherboard and connect the front panel connectors to it.
Install a power supply and connect it to the motherboard.
Install the processor and memory in dual channel mode.
Install the SSD hard drive and SATA hard drive.
Install the optical drive.
Connect a monitor, mouse, and keyboard.
Boot into the BIOS configuration utility to verify that all hardware is installed correctly.
Note: It is important to refer to the motherboard manual for specific instructions and compatibility of hardware components. It is also important to follow proper safety precautions when handling computer components and installing them.
Explanation:
The specific steps and hardware requirements will vary depending on the motherboard and other components being used.
What is motherboard?It is the circuit board that establishes the several sorts of storage devices, memory modules, and graphics cards that can be connected to your computer.
It also distributes electricity from your power source and links all of your hardware to your processor.
A general overview of the steps involved in building a computer:
Start by preparing a clean, well-lit workspace and gathering all the necessary hardware components.Install the motherboard in the computer case, using the screws provided.Install the power supply in the computer case, using the screws provided.Install the processor on the motherboard, following the manufacturer's instructions.Install the memory (RAM) on the motherboard, ensuring that it is installed in dual channel mode.Install the hard drives (SSD and SATA) and optical drive in the computer case, using the screws provided.Connect the front panel connectors (power switch, reset switch, LED indicators, etc.) to the motherboard.Connect the power cables from the power supply to the motherboard and other components.Connect a monitor, mouse, and keyboard to the computerTurn on the computer and enter the BIOS configuration utility to verify that all the hardware components are detected and installed correctly.If everything is working properly, you can proceed to install an operating system and any necessary drivers and software.Thus, in order to ensure that the finished product is dependable and performs as intended, it is crucial to refer to the manufacturer's documentation and adhere to best practices for computer assembly.
For more details regarding computer, visit:
https://brainly.com/question/21080395
#SPJ2
Write a python program to display the cube of a number upto given integer
Answer:
def display_cube(n):
for i in range(1, n+1):
print("Number is : {} and cube of the number is : {}".format(i, i**3))
# Test the function
display_cube(5)
Explanation:
This program defines a function display_cube(n) that takes an integer n as an argument and prints out the cube of the numbers from 1 to n. The range() function is used to generate a sequence of numbers from 1 to n, and the print() function is used to display the number and its cube. The ** operator is used to calculate the cube of a number. You can test the function by calling it and passing in an integer value as an argument.
What tasks does Disk Cleanup perform?
When the terminal phosphate bond of ATP is broken what is released?
The three phosphate groups in this ATP molecule are referred to as high energy bonds because they release a lot of energy when they break.
What takes place when ATP's phosphate bonds break?When one phosphate group is removed by breaking a phosphoanhydride bond during the process known as hydrolysis, energy is released and ATP is transformed into adenosine diphosphate (ADP). Energy is also released, just like when a phosphate is taken out of ADP to make adenosine monophosphate (AMP).
When the terminal phosphate link is broken, does ATP release energy?When ATP is broken down, usually by removing its terminal phosphate group, energy is released. The energy is utilized by the cell to perform work, typically by means of the liberated phosphate attaching.
To know more about terminal phosphate visit:-
https://brainly.com/question/17021565
#SPJ4
The term authentication describes a user or principle object that requests to access a file, folder, or other resource.
Access rights can be granted at the object owner's and administrator's discretion thanks to user access based on roles or groups.
What are files and folders on a computer?All computer data and programs are "written" into files and "read" from files, which serve as the common storage locker of a computer. A folder can be blank until it is filled, and a subfolder can hold one or more files. A folder may include other files as well, and there may be several levels of folders within of folders.
What distinguishes a folder from a file?Many files can fit in a folder. A folder can include many folders as well. The basic unit of storage in a computer is a file.
To know more about folder visit:
https://brainly.com/question/13043795
#SPJ4
As an IT decision maker, you plan to satisfy business needs by using software as a service. Which option do you deploy
SaaS is a business model that uses cloud-based software rather than locally installed software and will deploy Office 365.
What is software as a service model?Software as a service (SaaS) is a model for software licensing and delivery in which software is licensed on a subscription basis and is centrally hosted. SaaS is also referred to as "on-demand software" and Web-based/Web-hosted software.SaaS is an abbreviation for "Software-as-a-Service." This type of software is hosted in the cloud, and customers can access it remotely, usually through a subscription package. In this context, the SaaS platform is an important piece of technological infrastructure.A SaaS product is web-based software that is available to all users. SaaS products can be found almost anywhere.SaaS products that are widely used include Slack, and Microsoft Office 365. Client relationship management systems, or CRMs, and many customer service and support solutions are also SaaS-based.To learn more about SaaS refer to :
https://brainly.com/question/13615203
#SPJ4
PLEASE HELP 30 POINTS
Charts are most useful for which task?
O A. Removing data that is not useful from a spreadshee
OB. Organizing data into a new spreadsheet
C. Creating more columns in a spreadsheet
D. Creating visual displays of data for presentations
In order to make it simpler to understand enormous amounts of data as well as the relationships between various series of data, series of numeric data are displayed in charts in a graphical manner.
What Is a Chart?To depict the link between different data sets, charts sometimes mix text, symbols, and/or visuals. In many contexts, they are a well-liked way to exchange information. To illustrate how sales of a specific ice cream flavor have changed over the previous five years, for example, a bar chart may be used. Every bar's length would represent sales for that particular year.Multiple pieces of data can be compared visually using charts.People can grasp and recall information better when it is presented in charts. A image is often easier to understand than long passages of text for many people.Your argument will be stronger and your presentation will be more credible if you use a compelling chart.To Learn more About charts refer To:
https://brainly.com/question/25184007
#SPJ1
A recent survey suggests that 47% of all televisions are connected to the internet, 32% are voice controlled, and 22% are both connected to the internet and voice controlled. Suppose a television is selected at random and it is voice controlled. What is the probability that a randomly selected voice-controlled television is also connected to the internet?.
A voice-controlled television linked to the internet is likely to be selected at random with a probability of 0.69.
The Internet (or internet)[a] is an international network of linked computer networks that communicate with one another using the TCP/IP protocol stack. It is a network of networks made up of local to global private, public, academic, business, and government networks that are connected by a wide range of electronic, wireless, and optical networking technologies. The World Wide Web's (WWW) interconnected hypertext pages and applications, electronic mail, phone service, and file sharing are just a few of the many information resources and services available on the Internet.
The United States Department of Defense commissioned research in the 1960s to enable computer time-sharing, which led to the creation of packet switching, which is where the Internet had its start.
Learn more about Internet here:
https://brainly.com/question/10873104
#SPJ4
Can anyone help me with this question?
List and explain the examples of an information systems?
Answer:
Management information systems
Business
Expert System
Transaction processing system
Business Intelligence
Enterprise resource planning
Automation
Data Warehouse
Enterprise information system
Machine learning
Geographic information system
Database
Executive information system
Decision support system
A provider may release information about a victim of abuse, neglect, or domestic violence under which permission of HIPAA?
Under the heading of "Public interest and benefit activities," a provider may divulge information regarding a victim of abuse, neglect, or domestic violence.
According to which HIPAA regulation, providers must safeguard electronically transmitted and other forms of stored personal health information?All personally identifiable health information that a covered entity generates, receives, retains, or transmits electronically is protected by the Security Rule, which is a subset of data covered by the Privacy Rule.
Which of the following circumstances warrants the release of patient information?If the disclosure is necessary by law or if it is in the public interest, information can be disclosed without a patient's agreement in both of these situations. No matter if the patient has expressly declined consent or is unable to give consent, this is true.
To know more about domestic violence visits :-
https://brainly.com/question/10279566
#SPJ4
A worn out bottling machine does not properly apply caps to 5% of the bottles it fills. If you randomly select 20 bottles from those produced by this machine, what is the approximate probability that exactly 2 caps have been improperly applied?.
The likelihood that precisely 2 caps have been applied incorrectly is around probability and P = 0.356.
There is a 5% chance that the machine will misapply a bottle's cap.
P1 Equals 0.05 when expressed in decimal form.
The likelihood of successfully applying for the cap is then equal to p2 = 0.95.
The likelihood is as follows if we choose 20 bottles and just two of them have a cap issue:
P = 0.05^2*0.95^18
Due to the fact that two bottles fell into the 0.05 and 18 bottles into the 0.95
P = 0.0089
However, each bottle has 20 chances to be filled with that probability, thus the likelihood is:
Pt = 2*20*0.089 = 0.356
The likelihood that exactly 2 caps were applied incorrectly is around 0.356 if you randomly choose 20 bottles from the ones this machine produces.
Learn more about probability here:
https://brainly.com/question/11087990
#SPJ4
14.3 troubleshoot system startup
System starting troubleshooting. To solve some of the simpler issues that could arise as your system boots, use these troubleshooting techniques.
What are the seven steps of the troubleshooting procedure?Determine the issue, develop a theory of likely cause, test the theory, create a plan (including potential effects), put the plan into practice, confirm the full functionality of the system, and then document everything.
What kind of diagnostic approach works the best?To effectively troubleshoot a problem, it is important to locate the root cause and thoroughly describe it in order to prevent future occurrences of the issue. Make sure to note that you have not found the fundamental cause if you are in a rush and can only solve the symptom to meet a deadline.
To know more about troubleshooting techniques visits :-
https://brainly.com/question/3991864
#SPJ4
2.3.3 Connect Fiber Optic Cables
You work as the IT administrator for a growing corporate network. You are in the process of creating an iSCSI storage area network (SAN) on the CorpiSCSI server. The server is currently connected to the network using an Ethernet cable. To increase the server's performance, you have decided to replace the existing Ethernet connection with a fiber optic connection.
In this lab, your task is to complete the following:
Connect the CorpiSCSI server to the switch using the appropriate fiber optic cable.
Examine the port types on the switch.
Examine the server's fiber optic NIC.
When connecting the server, use the color coding on the end of the fiber optic cable to identify the Tx and Rx connection ends.
Connector A (red) is Tx.
Connector B (black) is Rx.
Remove the server's previous Ethernet network connection and place the Ethernet cable on the Shelf.
Verify that the server is connected to the network through the fiber optic connection.
Long-distance and high-performance data networking are made possible by fibre optics. The internet, television, and telephones are all forms of telecommunication that use it frequently.
Which 2 fibre optic cable types are there?Multimode and single-mode fibre optic cables are both available. The core of multimode optical fibre, also known as OFC, has different optical characteristics, allowing it to simultaneously transmit numerous light rays (modes). A substantially smaller core size is present in single-mode fibre (9 microns).
What kind of cable is fibre optic?Multimode and singlemode are the two "modes" of fibre optic cable that are available. Mode describes light pulses, whether they are numerous or only one. Two core sizes for multimode fibre (MMF) are available: 50 m and 62.5 m.
To know more about telecommunication visit :-
https://brainly.com/question/29675078
#SPJ4
Which of the following is true about parallel computing performance?a) Computations use multiple processors.b) There is an increase in speed.c) The increase in speed is loosely tied to the number of processor or computersused.d) All of the answers are correct.
The correct answer isa) Computations use multiple processors.employing a machine to do a calculation, such as a scientific software programme for numerical calculations.
Many processors are used during computations. The rate of change quickens. The number of processors or computers used and the improvement in speed are only tangentially related. In a particular form of computer architecture known as parallel computing, a number of processors work together to carry out several smaller tasks that are each part of a bigger, more complicated issue. Multiple processors or CPUs are used in parallel processing to manage different aspects of a single task. By distributing a task's numerous components over several processors, systems can reduce the amount of time a software takes to run.
To learn more about Computations click the link below:
brainly.com/question/21080395
#SPJ4
State the hardware technological differences between second and third generation computers
1. Second generation computers used vacuum tubes as the primary electronic component while third generation computers used transistors.
2. Second generation computers used magnetic core memory whereas third generation computers used integrated circuits.
3. Second generation computers used punched cards as the primary input device while third generation computers used keyboards.
4. Second generation computers had limited capabilities in terms of speed and storage compared to third generation computers.
5. Second generation computers used batch processing while third generation computers used time-sharing.
Your organization recently purchased 18 iPad tablets for use by the organization's management team. These devices have iOS pre-installed on them.
To increase the security of these devices, you want to apply a default set of security-related configuration settings.
What is the BEST approach to take to accomplish this? (Select two. Each option is part of a complete solution.)
The best approach to take to accomplish this would be to:
Use Mobile Device Management (MDM) software to remotely configure and manage the devices. This allows you to apply security policies, install security software, and remotely wipe or lock the devices if they are lost or stolen.
Configure the devices with a passcode or biometric authentication to ensure that only authorized users can access them. This can be done through the MDM software or through the device's settings.
1. Look at the information the College Board provides about Advanced Placement (AP) courses by clicking the "Advanced Placement Program" link. Explore the links on the website and list three pieces of information they provide.
2. Click the link for "AP Courses and Exams." Now click the name of a subject, and once you're on the page, find the link for the document containing the course description. Skim the course description and answer the following questions. a) which course did you look at?; b) b. What topics does this course cover? On what page(s) did you find this information?
a) I looked at the AP Computer Science A course.
b) This course covers topics such as problem solving, object-oriented programming, data structures, abstraction, design, and the development of algorithms. This information can be found on pages 3-7 of the course description.
Exploring the AP Computer Science A CourseWhich course did you look at?I looked at the AP Computer Science A course, which covers topics such as problem solving, object-oriented programming, data structures, abstraction, design, and the development of algorithms.
What topics does this course cover? On what page(s) did you find this information?The information about these topics can be found on pages 3-7 of the course description. This provides a comprehensive overview of the topics covered in the course, allowing students to make an informed decision about enrolling in the course.
Learn more about Course: https://brainly.com/question/24398353
#SPJ4
x = int(input("Enter a number: ")) print (x)) What happens if the user types in A?
Answer: The "what happens if the user types in A" is not in quotations;
Explanation: The correct code would be x = int(input("Enter a number")) print" "x" What happens if a user types in A?" Assuming the language is python
Answer:
If the user types in "A" as an input, the program will raise a ValueError exception, because the input "A" is not a valid integer. The int() function is used to convert a string representation of a number to an integer, and it raises a ValueError if the input string cannot be converted to an integer.
The error message will be: "invalid literal for int() with base 10: 'A'"
And the program will stop executing. To avoid this, you can use try-except block to catch the exception and handle it by providing a proper error message or any other action you want to take.
where can i get an ignition interlock device installed?
With more than 4,500 facilities nationally, interlock has the greatest installation locations of any ignition interlock provider.
Can you get around a door lock's technology?We've covered every method we could think of to avoid an ignition interlock device, but the primary conclusion is that there isn't a good way to do it. Even if you might think your situation is unique or extraordinary, the interlock device was set up for a reason.
Which interlock is the easiest to operate?The L250 ignition interlock is currently the simplest device to use. It offers an easy-to-understand blow pattern and a slim, unobtrusive design to help you quickly get back on the road.
To know more about interlock visit:-
brainly.com/question/7162510
#SPJ4
1. true or false? if all network traffic resides on the local lan, configuring a default gateway is not necessary?
The given statement "if all network traffic resides on the local LAN, configuring a default gateway is not necessary" is True because the traffic never leaves the local LAN so it does not have to pass through a router/default gateway to get to another network.
A gateway is a piece of hardware that joins networks with various communication protocols in a way that permits information to move back and forth between them. It both transmits the data and transforms it into a format that the protocols on the receiving network can use.
A default gateway is a router that links your host to distant network segments more specifically. Communications between a corporate network and the Internet can be transferred through an Internet gateway.
A gateway frequently serves as a protocol converter so that users can send and receive messages via the Internet since local-area networks (LANs) used by businesses sometimes employ protocols that are different from those of the Internet.
For further information regarding default gateway, click the link below:
brainly.com/question/30169161
#SPJ4
Darren is starting to craft his resume. What is one acceptable practice he should implement to make a resume that is MOST likely to get him an interview?
A.
Fill the entire page with information from top to bottom.
B.
List at least five references with their contact information.
C.
Incorporate a wide variety of fonts, styles, and images.
D.
Use the language that is used in the job advertisement.
Answer:b
Explanation:
A formula in cell D1 of this spreadsheet gives a result of 10. Which formula
was most likely entered in cell D1?
A. =A1*A3
B. =B2-B3
C. =C2+C3
D. =A2/C2
Answer: C. =C2+C3
Explanation:
A user receives this error message:
What is the cause?
a. SSL certificate is invalid or self-signed
b. User needs to change the URL to http://from https://
c. Web server doesn't support HTTPS sites
d. Domain is improperly configured at the registrar
e. User's browser doesn't support secure websites
The most frequent reason for SSL certificate failures is this. This error indicates that the SSL certificate's validity time has expired. Each certificate has an expiration date. Any certificates that are not still valid will be rejected by the client.
The validity periods are often no longer than a year. Therefore, it is simple to overlook updating the certificates before they expire. The browser checks the expiration dates of all the certificates in your chain, including the leaf, intermediate, and root certificates. Verify that the intermediate and leaf certificates are both current. When a browser obtains an SSL certificate whose validity term hasn't yet begun, they encounter the inactive certificate problem. To handle the certificates for your server, it is normal practice today to utilize a certificate manager. The new certificates, whose validity term begins at the moment of deployment, will be automatically deployed by the manager. The client will reject the certificate if the client machine's clock is 5 minutes out owing to misconfiguration or other issues.
To learn more about SSL certificate click here:
brainly.com/question/24276018
#SPJ4
Which algorithms have best time complexity?
Answer:
We should say that the best algorithm would have time complexity of O(1) which is a constant. This means the run time of the algorithm is either independent of the data size or there is a constant such that the runtime is bounded above by a constant.
d
10
CAT3, CAT4, CAT5, CAT6, and CAT7 are the five different categories of which type of cable?
OA. UTP
OB. STP
O C. fiber optic
O D. broadband
Reset
Next
The five various types of Ethernet LAN cables are categorized as CAT3, CAT4, CAT5, CAT6, and CAT7.
What is the total number of Category cables?In LANs, three different types of ethernet cables are typically used: coaxial cables, twisted pair cables, and fiber optic cables.
Which type of cable is advised for use with Category?CAT5e, which is the most often used Ethernet cable and is suitable for the majority of gigabit Ethernet applications. Ethernet cables for CAT5e, CAT6, and CAT6a are available from StarTech.com. As long as it fulfills the transfer speeds needed for the application, any cable type can be used.
To know more about cable visit:-
https://brainly.com/question/10932960
#SPJ1
In what situations can knowing the index of an item in a list be useful?
Why might a programmer want to define their own functions? What are some potential disadvantages? How might new functions make debugging more complicated?
What are some situations in which you would use the len function to find the length of a list?
What is an example of a situation in which you might use the append method? In what ways is the append method limited?
What is the difference between a method and a function? In what ways are they similar? Why do you think Python makes a distinction between methods and functions?
Can you please answer all the questions I need them done QUICKLY and also make sure there is no copyright/Plagiarism thank you
When we are shopping for something, having the index of an item in a list is helpful.
What are some scenarios in which you might use the len function to determine a list's length?One of Python's built-in functions is called len(). It gives back an object's length. It might, for instance, return the number of entries in a list.
What is an instance where the append method might be applied?To add a single item to a certain collection type in Python, use the predefined function called append. Without the append method, programmers would have to change the collection's entire source code to add a single value or item.
To know more about list visit :-
https://brainly.com/question/28066478
#SPJ1
A manufacturer of opthalmic lasers currently sells its product in the united states and europe. The firm has noticed, however, that hospitals in developing countries are now interested in having this technology. This represents a(n).
Answer:
need for technology and it’s opportunity to save peoples lives
Explanation:
:)
As a result of improved technology, many medical and surgical procedures can be done on an outpatient basis, which means that the patient does not have to go to the hospital for the procedure. Pay for the full cost of the procedure. Remain in the hospital for long periods. Receive care from a medical professional.
One benefit of improved technology in medical and surgical procedures is that they can often be done on an outpatient basis. With technology it can make all the things that it happened in hospital can be done as efficient and easy.
This means that the patient does not have to go to the hospital for the procedure and can go home the same day. This can save the patient money on hospital costs, as well as allow them to return to their normal daily activities sooner. Additionally, it can also reduce the risk of hospital-acquired infections and complications.
Learn more about technology in hospital, here https://brainly.com/question/30053731
#SPJ4
A data analyst wants to quickly create visualizations and then share them with a teammate. They can use _____ for the analysis.
A data analyst could use Tableau for quickly creating visualizations and sharing them with a teammate. Tableau is a data visualization and business intelligence software that allows users to connect to various data sources, create interactive dashboards and reports, and share them with others.
Tableau has a drag-and-drop interface and a wide range of built-in chart types, making it easy for users to create professional-looking visualizations with minimal coding experience. Additionally, Tableau has a feature called Tableau Public, which enables users to share their visualizations with the public, making it a great tool for data analysts who want to share their findings with their colleagues or the wider community.
Learn more about tableau, here https://brainly.com/question/25531734
#SPJ4
As a photographer showing your work, when you choose to highlight a specific idea. subject, method, or area of interest with your images, what do you also convey to the audience?
Answer:
by conveying an emotion, expressing a mood, sharing an idea & telling a narrative
Explanation:
reason being is to explain what certain area explains or has reason to be in said picture, explain why the area has been photoshoot, or share idea of why it was placed in photo, tell a narrative behind he object or area or a relative one
A software company sells a package that retails for $99. Quantity discounts are given according to the following table: Write a program that asks the user to enter the number of packages purchased. The program should then display the amount of the discount (if any) and the total amount of the purchase after the discount.
Program in C++:
#include<iostream>
using namespace std;
What is software company ?Each team works independently on its many initiatives and is entirely autonomous. Although the structure is straightforward and every employee is answerable to a single person, this does not promote knowledge sharing or the best use of human resources. matrix architecture According to this approach, there are specific managers or leaders for each major area of expertise who "rent" their staff to product or project managers, who formally or unofficially purchase the staff members and pay for their time. This results in the product/project manager and the designated "resource" manager serving as each private employee's two superiors. Although it maximises the use of human resources, it could also lead to conflicts.
To know more about software company visit:
https://brainly.com/question/13663539
#SPJ4