12. Calculate the molality of C2H5OH in a water solution that is prepared
by mixing 75.0 mL of C2H5OH with 200.0 mL of H2O at 20°C. The density
of the C2H5OH is 0.789 g/mL at 20°C.

If  1.85 moles of Br2 are put in a 0.730−L flask, 2.00 percent of the Br2 undergoes dissociation. the equilibrium constant Kc for the reaction is: 9.84 M.

The first step is to determine the initial concentration of Br2:

[Br2] = number of moles / volume in liters = 1.85 mol / 0.730 L = 2.534 M

Next, we need to determine the change in concentration of Br2 due to dissociation:

Δ[Br2] = -2x, where x is the extent of dissociation in moles

Since 2.00% of Br2 dissociates, we know that x = 0.0200(1.85 mol) = 0.0370 mol

Therefore, Δ[Br2] = -2(0.0370 mol) = -0.0740 M

The equilibrium concentration of Br2 is then:

[Br2]eq = [Br2]initial + Δ[Br2] = 2.534 M - 0.0740 M = 2.460 M

The equilibrium concentration of Br is twice the equilibrium concentration of Br2 (based on the balanced chemical equation):

[Br]eq = 2[Br2]eq = 2(2.460 M) = 4.920 M

Finally, we can calculate the equilibrium constant Kc using the equilibrium concentrations:

Kc = [Br]eq^2 / [Br2]eq = (4.920 M)^2 / 2.460 M = 9.84 M

Therefore, the equilibrium constant Kc for the reaction Br2(g) ⇆ 2Br(g) is 9.84 M.

Learn more about  equilibrium constant Kc for the reaction here:https://brainly.com/question/12270624

#SPJ1

The order of  the solvents according to their polarities, from the most polar to nonpolar are :

water > ethanol > acetone > ethyl acetate > hexane

The water is the most polar compound as the water has the two polar end and the shape of the water molecule is bent shape. Th water molecule has the net dipole moment. The ethanol will be than water as the ethanol contains the non polar alkyl group. The alcohols are polar than that of ketone because alcohol form the hydrogen bond. The carbonyl are more polar than the ester.

The hexane is the nonpolar compound because it does not have any of the polar bond present in it.

To learn more about polar here

https://brainly.com/question/30513173

#SPJ4

Pitt inorganic chemistry refers to the study of inorganic chemistry at the University of Pittsburgh.

Inorganic chemistry is a branch of chemistry that deals with the study of inorganic compounds and their reactions. It is concerned with the properties and behavior of inorganic compounds, which are compounds that do not contain carbon-hydrogen bonds, such as metals, salts, and minerals.

The Department of Chemistry at the University of Pittsburgh offers courses and research opportunities in the field of inorganic chemistry, including the synthesis and characterization of inorganic compounds, the study of their properties and reactivity, and the development of new materials and catalysts.

Inorganic chemistry is an important field of study because it helps us to understand the properties and behavior of a wide range of compounds that are essential for many industrial processes, such as the production of metals, ceramics, and semiconductors. It is also important for the development of new materials and technologies, such as batteries, fuel cells, and solar cells.

To know more about chemistry here:

https://brainly.com/question/30329146#

#SPJ11

The buffer solution definition of the chemistry is the solution that usually containing the acid and the base, or the salt, that tends to maintain the constant hydrogen ion concentration.

The buffer solution is the acid or the base of the aqueous solution consisting of the mixture of the weak acid and its conjugate base, or the vice versa. Its resist the pH change when the small amount of the strong acid or the base is added to it.

This types of the solution of the reserve acidity or the alkalinity which will resists the change of the pH of the solution upon the addition of the small amount of the acid or the alkali.

To learn more about buffer solution here

https://brainly.com/question/24262133

#SPJ4

Compound A is antiaromatic, Compound B is aromatic, Compound C is nonaromatic, and Compound D is aromatic.

Aromaticity is a property of certain cyclic, planar molecules that exhibit unusual stability due to their delocalized pi electrons. These molecules must meet certain criteria, such as being cyclic, planar, fully conjugated, and obeying Hückel's rule. If a molecule meets these criteria and has 4n + 2 pi electrons, it is considered aromatic. If it has 4n pi electrons, it is antiaromatic.

In Compound A, the molecule is a planar, fully conjugated ring of six pi electrons, which is not a multiple of 4. This makes it antiaromatic. Compound B, on the other hand, is a planar, fully conjugated ring of six pi electrons, which does meet Hückel's rule and has 4n + 2 pi electrons, making it aromatic. Compound C is a planar molecule that does not meet the criteria for aromaticity, so it is nonaromatic. Compound D is a planar, fully conjugated ring of 10 pi electrons, which meets Hückel's rule and has 4n + 2 pi electrons, making it aromatic.

Learn more about Hückel's rule

brainly.com/question/29497803

#SPJ4

The Great Gatsby symbolize the hope, optimism, and the dreams. The green light is the prominent symbol of the hope in The Great Gatsby.

The Great Gatsby hope, the optimism, and the dreams. The green light is the  prominent symbol of the hope in The Great Gatsby. When the Gatsby first met the Daisy, he was noticed that the green light that was in  the dock by the her house. The green light is the symbol of the hope.

The Nick connects the Gatsby's American Dream of the winning Daisy's that love to the American Dream of the first of the settlers coming to the America.

To learn more about gatsby here

https://brainly.com/question/29775350

#SPJ4

Anticholinesterases will increase the usual time of acetylcholine in the synapse. Rebinding can then connect the transmitter to nicotinic receptors. It allows acetylcholine the stronger advantage over the neuromuscular blocking agent.

To find the molarity of a solution of hydrochloric acid, you need to know the number of moles of solute (HCl) present in a certain volume of solution.

First, we can calculate the molar mass of the HCl solution:

32.0% HCl * (36.46 g/mol HCl + 1.01 g/mol H₂O) = 11.66 g/100 ml

Next, we can use the density of the solution and the molar mass to calculate the moles of HCl present in 1 liter of solution:

1 L = 1000 ml

11.66 g/100 ml x 10 = 116.6 g/L

116.6 g / 36.46 g/mol = 3.20 moles/L

So the molarity of the solution is 3.20 M HCl.

Want to know more about molarity visit the link which is given below;

https://brainly.com/question/8732513

#SPJ4

Small volumes of solvents are used to rinse the solid product in the recrystallization procedure in order to remove impurities.

In the recrystallization procedure, small volumes of solvents are used to rinse the solid product to remove impurities. This is done to prevent the loss of the desired product, as larger volumes of solvent can cause the product to dissolve and be lost.

The small volume of solvent is also important for effective removal of impurities, as it allows for better control of the washing process and ensures that impurities are washed away without dissolving the product.

Thus, keeping the volume of rinses small is a key step in obtaining a pure, high-quality product in the recrystallization procedure.

More on the recrystallization procedure can be found here: https://brainly.com/question/29222331

#SPJ1

The value of the equilibrium constant, Kc, for the reaction H2(g) + I2(g) ⇔ 2HI (g) at 448°C is 50.5.

The equilibrium equation describes the static or dynamic equilibrium of all internal and external forces of the system. In the static case, the equilibrium equation is. [6.23] K · u = F. where K is the stiffness matrix of the system, u is the vector with the nodal displacements and F represents the external forces

A chemical reaction is in equilibrium when there is no tendency for the quantities of reactants and products to change. The direction in which we write a chemical reaction (and thus which components are considered reactants and which are products) is arbitrary.

To know more about equilibrium visit

https://brainly.com/question/30694482

#SPJ1

An excess reactant is a reactant that is present in a greater amount than is required to completely react with the other reactants.

Organic chemistry is the study of chemical compounds that contain carbon. It is a branch of chemistry that focuses on the structure, properties, and reactions of organic molecules.

An organic molecule is a molecule that contains carbon atoms bonded to hydrogen atoms, along with other elements such as oxygen, nitrogen, and sulfur. Organic chemistry is important in many fields, including medicine, agriculture, and materials science.

In a chemical reaction, a reactant is a substance that is consumed in the reaction to form the products. This means that there will be some of the excess reactant left over after the reaction is complete. The amount of product formed in a reaction is determined by the amount of the limiting reactant, which is the reactant that is consumed completely in the reaction.

Therefore, it is important to know the amount of excess reactant in a reaction in order to predict the amount of product that will be formed.

To more about Organic chemistry here:

https://brainly.com/question/14623424#

#SPJ11

Because they include a lot of iron and magnesium, light silicates have a lower specific gravity than dark silicates, which have a greater specific gravity.

This difference is mostly caused by the amounts of iron and magnesium that are present; light silicates have significantly less iron and magnesium and, in comparison to dark silicates, comparatively more potassium, aluminium, and sodium.

Because they include a lot of iron and magnesium, light silicates have a lower specific gravity than dark silicates, which have a greater specific gravity.

To know more about magnesium visit:-

https://brainly.com/question/1533548

#SPJ1

Answer:

160 g

Explanation:

The balanced chemical equation is:

S2 + 2O2 → 2SO2

From the equation, we can see that for every 2 moles of O2 used, we produce 2 moles of SO2.

Therefore, for 1 mole of O2 used, we produce 1 mole of SO2.

To find the number of grams of SO2 produced, we need to know the molar mass of SO2, which is approximately 64.06 g/mol.

So, to calculate the mass of SO2 produced from 2.5 moles of O2, we can use the following conversion:

2.5 moles O2 x (2 moles SO2/2 moles O2) x (64.06 g SO2/1 mole SO2) = 160.38 g SO2

Therefore, 160.38 grams of SO2 can be produced if 2.5 moles of O2 are used.

Answer:

G

Explanation:

Oxygen is most likely to be found in the atmosphere because it is the most abundant element in Earth’s atmosphere.

The decomposition reaction of phosphorus tetra oxide (P₂O₄) is as follows:

4 P₄O₆ ⇒ P₄ + 6 P₂O₄

A decomposition reaction is a reaction in which a compound terminates  into two or more simpler substances.

The general form of a decomposition reaction is: AB→A+B. Most decomposition reactions involve an input of energy in the form of heat, light, or electricity.

4 P₄O₆ ⇒ P₄ + 6 P₂O₄ this is an example of decomposition reaction of phosphorus oxide.

Thus, The decomposition reaction of phosphorus tetra oxide (P₂O₄) is 4 P₄O₆ ⇒ P₄ + 6 P₂O₄

To learn more about the decomposition reaction, follow the link;

https://brainly.com/question/16987748

#SPJ9

The gravitational potential energy in a 100-kg diver, at 10-m, is 9800 J.

The gravitational potential energy of an object is calculated by using the formula:
Pe = mgh

Where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above the ground.

Given that the mass of the diver is 100 kg and the height of the platform is 10 m, we can plug these values into the formula to find the potential energy:
PE = (100 kg)(9.8 m/s²)(10 m)
PE = 9800 J

Therefore, the gravitational potential energy of the 100-kg diver on the 10-m platform is 9800 J.

See more about gravitational potential energy at https://brainly.com/question/15896499.

#SPJ11

Answer:

water freezes at 32 degrees Fahrenheit (0 degrees Celsius)

Explanation:

Answer:

?

Explanation:

Stable Lewis Structure of NO3

The two common methods used to specify experimental uncertainty are Absolute uncertainty, Relative uncertainty.

Absolute uncertainty is the estimated maximum error or deviation from the true value of a measured quantity. The absolute uncertainty is usually expressed as a single value or a range of values and is usually reported as the standard deviation or the standard error of the mean.

Relative uncertainty is the ratio of the absolute uncertainty to the measured value, expressed as a percentage. The relative uncertainty is used to describe the precision of a measurement relative to the size of the measurement.

These methods are used to describe the accuracy and precision of experimental measurements, and they are useful in determining the degree of confidence that can be placed in the results of an experiment.

To learn more about Absolute uncertainty :

https://brainly.com/question/24121107

#SPJ4

The intermolecular force of attraction between a charge ion (cation or anion) and a molecule is known as an ion-dipole interaction.

It frequently appears in the mixture formed when polar solvents dissolve ionic compounds. As the charge on the ion or the size of the dipole of the polar molecule increases, ion-dipole attractions become stronger.

The partially negative end of a neutral polar molecule can be attracted by cations, which are positively charged species. The partially positive end of a neutral polar molecule can be attracted by anion, a species with a negative charge. You can see how these would bond together because ions have charges on either their positive or negative sides, just like dipole molecules do. It would draw cations to the

know more about ion dipole interactions click here

https://brainly.com/question/7206824

#SPJ4

A weak acid as well as its corresponding base make up a buffered solution. The ions are represented by violet, grey, and green spheres, respectively.  The first system represents the buffer.

A buffer is indeed a solution that resists pH fluctuations and contains either one weak acid as well as its salt or even a weak base as well as its salt. To put it another way, a buffer is indeed an aqueous solution that includes a weak base as well as its conjugate acid, or a weak acid as well as its conjugate base.

A buffer may also be referred to as a buffer solution, hydrogen ion buffer, and pH buffer. A weak acid as well as its corresponding base make up a buffered solution. The ions are represented by violet, grey, and green spheres, respectively.  The first system represents the buffer.

Therefore, the first system represents the buffer.

To know more about buffer, here:

https://brainly.com/question/29763040

#SPJ1

Answer:

Explanation:

The pH of a solution that contains 11.7 g of NaCl for every 200 mL of solution cannot be determined from the information provided. The pH of a solution depends on the concentration of hydrogen ions (H+) present in the solution. The presence of NaCl in the solution does not directly affect the pH of the solution.

NaCl is a neutral salt, meaning it does not affect the pH of a solution when it is dissolved in water. In order to determine the pH of the solution, we would need to know the concentration of hydrogen ions (H+) in the solution.

At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.

Pentane is an organic compound with the formula C₅H₁₂ - that is, an alkane with five carbon atoms.

Given is to understand why the temperature increase at the of the experiment.

At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.

Therefore, at the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.

To solve more questions on  electrostatic energy scaling,  visit the link-

brainly.com/question/29014197

#SPJ1

The molality of hexane in the solution is 7.32 mol/L. This can be calculated by dividing the mass of hexane by the mass of the solvent, which is octane.

To find the molality, we first need to find the number of moles of hexane in the solution. This can be done by dividing the mass of hexane (180.3 g) by its molecular weight (86.18 g/mol), resulting in a value of 2.09 moles. Next, we need to find the mass of the solvent, which is octane (200.0 g). To convert the mass of the solvent to its equivalent in liters, we use the density of octane, which is approximately 0.703 g/mL at 25°C.

Dividing the mass of octane by its density gives us a volume of 284.9 mL, which is equivalent to 0.2849 L. Finally, the molality can be found by dividing the number of moles of hexane by the volume of the solvent in liters:

2.09 moles ÷ 0.2849 L = 7.32 mol/L.

Learn more about Hexane:

https://brainly.com/question/9630611

#SPJ4

Answer:

Ultraviolet is the answer im pretty sure.

Explanation:

ultraviolet light are more energetic than visible light, and infrared, microwaves, and radio waves, are less energetic than the light in the visible spectrum.

Answer:

The shapes of continents fit together like a puzzle.

Explanation:

Just look at the east coast of South America and the west coast of Africa—it's almost a perfect fit! Identical rocks have been found on different continents. These rocks formed millions of years ago before the continents separated.

Answer:

e

Explanation:

because it loses a proton stop being magnetic

According the question, the first reaction is a decomposition reaction,

The second is a synthesis reaction, the third is a decomposition reaction, and the fourth is a decomposition reaction.

A breakdown reaction is what a synthesis method is not. During a decomposition process, a single component splits apart into two or more distinct components or compounds.

When two or even more straightforward compounds combine to produce a more complicated outcome, this is referred to as a synthesis in chemical terms. In a decomposition reaction, a type of chemical reaction, one reactant yields two or more products.

In contrast to synthesis, which involves creating new chemical bonds among reactants to create new products, decomposition is the action of rupturing chemical bonds among reactants to produce a variety of products.

To know more about decomposition process visit:

brainly.com/question/27746877

#SPJ1