100 pOiNtS
Explain why the vapor pressure of a solution differs from that of the pure solvent
Explain why the freezing point of a solution differs from that of the pure solvent
Explain why the boiling point of a solution differs from that of the pure solvent

0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 but a 0.010 M solution of acetic acid, HCH₃COO, is 3.37 is because HCl dissociates more.

This is the separation of ions of an ionic compound when it dissolves.

Since 0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 its hydrogen ion concentration is gotten from

pH = -log[H⁺]

So,

[tex][H^{+} ] = 10^{-pH}[/tex]

So, [H⁺] = 10⁻²

Also, since 0.010 M solution of acetic acid, HCH₃COO, has a pH of 3.37, its hydrogen ion concentration is gotten from

pH = -log[H⁺]

So,

[tex][H^{+} ] = 10^{-pH}[/tex]

So, [H⁺] = 10⁻³°³⁷ = 0.000427 = 4.27 × 10⁻⁴

Since the hydrogen ion concentration of HCl is 10⁻² and the hydrogen ion concentration of HCH₃COO is 4.27 × 10⁻⁴, we see that HCl dissociates more than HCH₃COO.

So, 0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 but a 0.010 M solution of acetic acid, HCH₃COO, is 3.37 is because HCl dissociates more.

Learn more about dissociation here:

https://brainly.com/question/25854432

D. Water

Answer:An accompanying WMO report on greenhouse gas concentrations shows that 2015-2019 has seen a continued increase in carbon dioxide (CO2) levels and other key greenhouse gases in the atmosphere to new records, with CO2 growth rates nearly 20% higher than the previous five years.

Explanation:That's because the annual growth rate of atmospheric carbon dioxide has roughly tripled, from 0.6 ppm per year in the early 1960s to an average 2.1 ppm during the past 10 years. At Mauna Loa, carbon dioxide concentrations in 2015 jumped by 3.05 ppm

Answer:

Any time a simple metal reacts with an acid it is a single displacement reaction.

Explanation:

Answer:

What are three ways continents get bigger?

age of rocks.

fossils.

evidence of melting (subduction)

location on current continents.

glacial deposits.

Answer:

alpha particles

Explanation:

alpha particles the least penetrating but potentially most damaging and gamma rays the most penetrating. A beta particle, also called beta ray or beta radiation, is a high-energy, high-speed electron or positron emitted by the radioactive decay of an atomic nucleus during the process of beta decay.

sana po makatulong

#keeponlearning

#Godbless

Answer:

This is my own explanation:

Explanation:

It is important to know the mixtures you input together because you may determine the type of substance you produced from different elements and several combinations of matter. This assists in identifying your specific substance.

The use of ethanol instead of acetic acid is not the wise choice.

When you are out of acetic acid and decide to use ethanol as the solvent in the transformation, it would not be a wise choice because acetic acid and ethanol are two totally different chemicals. Due to different in features, it can't act the same and the desirable results can't be observed.

So we can conclude that use of ethanol instead of acetic acid is not the wise choice.

Learn more about solvent here: https://brainly.com/question/25326161

To use ethanol in place of acetic acid as a solvent in the transformation of 3 into 4, is not a wise choice.

Functional groups are the specific groups which after attaching to any molecule changes the property of the molecule.

Acetic acid has carboxylic (-COOH) group as functional group and ethanol has hydroxyl (-OH) functional group and both has different properties from each other. So use to ethanol in place of acetic acid is not correct as it will not fulfill the requirements of acid.

Hence use of ethanol in place of acetic acid is not a wise choice.

To know more about functional groups, visit he below link:
https://brainly.com/question/6028840

#SPJ4

Answer:

To protect people and the environment.

Explanation:

In an ecosystem, the  goal of all environmental regulations is to protect people and the environment.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/13979184

#SPJ2

Explanation:

Individual gas molecules have different speeds. Collisions between these molecules can change individual molecular speeds, but this does not affect the overall average speed of the system.

The number of moles of air present is 0.056 mole

The ideal gas is one in which molecules do not attract or repel each other.Many gases like oxygen,nitrogen, carbon di oxide can be treated as the ideal gases as particular temperature and pressure.The real gases at high temperature and lower pressure can be treated as ideal gases.

The given data in the question is

Volume = 1.35 L

Pressure (P) = 750 torr

Temperature (T) = 17 °C = 17 + 273 = 290 K

Gas constant (R) = 62.396 L•torr/mol•K

The number of moles (n) =?

How to determine the number of moles:

The number of moles present can be obtained by using the ideal gas equation as illustrated below:

[tex]PV=nRT[/tex]

Divide both sides by RT

[tex]n=\dfrac{PV}{RT}[/tex]

[tex]n=\dfrac{(750\times 1.350}{62.396\times 290)}[/tex]

[tex]n=0.056\ moles[/tex]

Hence, the number of moles of air present is 0.056 mole

To learn more about the ideal gas equation follow

brainly.com/question/4147359

Answer:

answer in picture

Explanation:

The relationship between the volume, temperature, and pressure of the gas can be given by Charles law. The volume of the tire is 1.1 L.

According to Charles's law, the volume is directly proportional to the temperature of the gas at a constant pressure.

Charle's law can be shown as,

[tex]\rm \dfrac{V_{1}}{T_{1}} = \rm \dfrac{V_{2}}{T_{2}}[/tex]

Given,

Initial volume = 1.0 L

Initial temperature = 295 K

Final volume = ?

Final temperature = 325 K

Substituting values in the above equation the final volume can be calculated as:

[tex]\begin{aligned}\rm V_{2} &= \rm \dfrac{V_{1}T_{2}}{T_{1}}\\\\&= \dfrac{ 1 \times 325}{295}\\\\&= 1.1\;\rm L\end{aligned}[/tex]

Therefore, the final resulting volume of the tire is 1.1 L.

Learn more about Charle's law here:

https://brainly.com/question/26849359

Answer:

Explanation:

Answer:

Melamine

Explanation:

Answer:

solute dissolves in a solution

Answer:

solvent

Explanation:

because solvent are liquid that disolves

Aldol condensation involves  two aldehydes or two ketones or an aldehyde and a ketone. The product of the reaction is shown in the image attached.

Aldol condensation is a reaction that involves two aldehydes or two ketones or an aldehyde and a ketone. This reaction occurs at the carbonyl group as one of the carbonyl compounds is in the enolate form.

The product of the reaction is shown in the image attached. This gives the mechanism for the Aldol condensation of the compound 3‑methylbutanal.

Learn more about aldol condensation: https://brainly.com/question/9415260

Answer:

Explanation:

the answer is 8.66


Mark me brainliest please.

The pH of the solution formed by mixing 25. 0 ml of a 0. 15 m solution of NH₃ with 25. 0 ml of 0. 12 m HCl is 8.66.

pH is potential hydrogen. It is the measurement of the acidity and basicity of any solution.

The solution of NH₃ is 25. 0 ml of a 0. 15 m

The solution of HCl is 25. 0 ml of 0. 12 m hcl

The pkb value is [tex]1.8 \times 10^-^5[/tex]

Putting the value in the formula

[tex]pOH=pKb +log[NH_3][HCl]\\\\ pOH = 1.8 \times 10^-^5+ log \dfrac{25.0 \times 0.15}{ 25.0 \times 0.12} \\\\ pOH = 1.8\times10^-^5+ log1.25 \\\\pOH = 1.8\times 10^-^5 + 1.25 = 3.05\\\\ pH = 14 - pOH = 14 - 1.25 = 8.66[/tex]

Thus, the pH of the solution formed by mixing 25. 0 ml of a 0. 15 m solution of NH₃ with 25. 0 ml of 0. 12 m HCl is 8.66.

Learn more about pH

https://brainly.com/question/15289741

#SPJ4

Given the freezing-point depression for a solution is 2. 5 °C and the cryoscopic constant is 4.5 °c/m, the molality of the solution is 0.56 m.

Freezing-point depression is a drop in the temperature at which a substance freezes, caused when a smaller amount of another, non-volatile substance is added.

The freezing-point depression for a solution is 2. 5 °C. We can calculate the molality of the solution using the following expression.

ΔT = Kf × b

b = ΔT / Kf = 2.5 °C / (4.5 °C/m) = 0.56 m

where,

Given the freezing-point depression for a solution is 2. 5 °C and the cryoscopic constant is 4.5 °c/m, the molality of the solution is 0.56 m.

Learn more about freezing-point depression here: https://brainly.com/question/14115775

The molality of a solution will be 0.56 m. if the freezing point depression for a solution is 2.5° C.

Molality is the measure of the moles of any solute in a solution per unit kg of the solvent.

Given, the freezing-point depression for a solution is 2. 5 °C

The kf is 4.5° c/m

[tex]\rm \Delta T = Kf \times b\\\\b = \dfrac{\Delta T}{kf} \\\\b = \dfrac{2.5^ \circ C}{4.5 \circ C/m} = 0.56 m[/tex]

Where T is freezing point depression

kf is cryoscopic constant of the solvent

b is molality of the solution

Thus, the molality of the solution is 0.56 m.

Learn more about molality

https://brainly.com/question/20366625

#SPJ4

From the available options with respect to Taylor's experiment, none of the data is qualitative.

These are data that cannot be measured using any instrument or assigned a numerical value.

Qualitative data are observable data based on perception.

This is unlike quantitative data that can be measured using relevant instruments and assigned numeric figures.

Mass can be measured in grams using a weighing balance, angle of inclination can be measured using relevant instruments, and time can be measured using a stopwatch.

Thus, none of the options is qualitative.

More on qualitative data can be found here; https://brainly.com/question/12929865

Answer:

None are Qualitative

Explanation: I took the test and got a 100%

Answer: Calcium

Hope this helps

Answer:

it's is math that you can answer with your sister and your mother

Answer:

346 degrees because 326+20= 346

Answer:

Mammals do not have instincts, so they must learn all their behaviors from their parents in order to survive.

Sea turtles must survive on their own, while mammals spend time with their parents and learn how to survive as they grow.

Sea turtles are less intelligent than mammals and, thus, cannot learn new behaviors from their parents.

Explanation:

Sea turtles rely on instincts more than mammals do, beacuse to get food for their survival.

Insticts are the natural impulse or motivation which are present from the inborn time to perform some functions in order to react in some specific external stimuli.

Mammals do not react impulsively in any external conditions because they have members or friends from their famliy side, who will teach them how to behave or react. But turtles didn't have that special person, so they do work rely on instincts to get food or many other purposes.

Hence, to survive sea turtles rely on instincts more than mammals do.

To know more about insticts, visit the below link:

https://brainly.com/question/16088051

Answer:

Explanation:using the ideal gas formula, calculate the volume of 1.5omoles of a gas at 115kPA and a temperature of 298k?

The resulting volume of the tire would be 1.1 L

According to this law, the volume of a given gas is directly proportional to its temperature, provided that the pressure remains constant.

The law can be presented mathematically as;  

[tex]\dfrac{V_1}{T_1} =\dfrac{V_2}{T_2}[/tex]

In this case, V1 = 1.0 L, T1 = 22 °C (295 K), T2 = 52 °C (325 K).

[tex]V_2=\dfrac{V_1T_2}{T_1}[/tex]V

[tex]V_2=\dfrac{1\times 325}{295}=1.1\ L[/tex]

Hence the final volume of the tire will be 1.1 L

More on Charles's law can be found here:

brainly.com/question/3491421

Answer:

the change of atmospheric pressure during the last few (generally three) hours before a regular observation.

Explanation:

Even small changes in barometric pressure can greatly impact the weather. The Weather Trend directional arrow icon, included on many AcuRite weather station products, will show one of the following three barometric pressure trend directions, indicating potential future weather conditions.

Paul J. Chirik developed methods associated with chemistry catalysis and transition metals, which may result useful for the development of manufacturing technologies.

Catalysis refers to the chemical processes that increase the rate of different types of reactions by lowering its activation energy.

Proteins (enzymes) are biological catalysts that increase the rate of chemical reactions in biological systems.

Catalysis may be reached by using transition metals (e.g., actinium and rutherfordium), which result useful in the development of manufacturing technologies.

Learn more about catalysis here:

https://brainly.com/question/12507566

Air masses are large air volume at constant humidity and a temperature it moves by convection in the atmosphere. The direction is from west to east.

Directions are the path or the points of something or an object. The earth has four major directions one towards the upper side called north, downwards called south, towards the left known as the west, and towards the right called east.

The image shows the movements of the arrow from the left to the right side. On the left is, the west and towards the right is the east.

Therefore, option a. from west to east is the movement of the air masses.

Learn more about air masses here:

https://brainly.com/question/27095390

Based on the energy usage shown by the graph, the best option for the chemical change represented is the combustion of iron.

The combustion of iron in oxygen leads to the formation of Iron (III) oxide in solid form.

For the combustion of iron to happen, a lot of heat has to be applied to the iron which is why the potential energy of reactants is high. As the reaction progresses, the energy needed reduces as iron (III) oxide is formed.

Find out more on Iron (III) oxide at https://brainly.com/question/11885810.