10. A sample of gas has a volume of 185 mL at 52.0°C. At what Celsius temperature will the
gas reach a volume of 240 mL?

By the Help of  Ideal gas laws, The new volume of the gas at a constant temperature when the pressure is changed from 4.22 atm to 1.202 atm is 12.94 L.

The Ideal Gas Law, PV = nRT, which takes P as the pressure, V as the volume, n as the number of moles, R as the gas constant, and T as the temperature, can be used to explain the relationship between pressure, volume, and temperature. If we keep the temperature constant, we can rearrange the equation to solve for the new volume:V1 = (P1 × V2) / P2, where V1 is the new volume and P1 and P2 are the initial and final pressures, respectively. Plugging in the values from the problem, we get:V1 = (4.22 atm × V2) / 1.202 atm = 3.41 L × (4.22 atm / 1.202 atm) = 12.94 LSo the new volume of the gas at a constant temperature when the pressure is changed from 4.22 atm to 1.202 atm is 12.94 L.

Learn more about Ideal gas:

brainly.com/question/28257995

#SPJ4

The order of melting points depends on the strength of the intermolecular forces between their molecules.

The order of melting points for naphthalene, iodine, sucrose, and NaCl is determined by the strength of the intermolecular forces between their molecules. Naphthalene has stronger intermolecular forces than iodine due to its larger surface area, resulting in a higher melting point. Sucrose has weaker intermolecular forces than naphthalene and iodine due to its smaller molecular size and polar nature, resulting in a lower melting point. NaCl has ionic bonds, which are the strongest type of intermolecular forces, resulting in the highest melting point among these four substances.

Learn more about melting points here:

https://brainly.com/question/28902417

#SPJ4

A food chain are interconnected in the sense that it shows a single pathway from the producers to the consumers and  the way energy flows in this pathway.

This refers to a linear sequence of organisms where nutrients and energy is moved from one organism to the other. This occurs when one organism consumes another organism.

The food chain starts with the producer organism, follows the chain and ends with the decomposer organism. m for survival. For example Grass (Producer) —–Goat (Primary Consumer) —– Man (Secondary consumer).

Learn more about food chain on

https://brainly.com/question/1807825

#SPJ1

When two different air masses collide, their difference in temperature, humidity, and air pressure can create a boundary between them, called a front.

When two different air masses collide, their difference in temperature, humidity, and air pressure can create a boundary between them, called a front.

This boundary separates the two air masses and often results in significant weather changes, such as precipitation and strong winds, as the denser, cooler air mass displaces the lighter, warmer air mass.

The passage of a front can bring about changes in the weather, as the leading edge of the cooler and denser air replaces the warmer air. The type of front can be characterized by its movement and the temperature changes it brings, and they are classified into four main types:

Learn more on air fronts here https://brainly.com/question/508529

#SPJ1

A student checks the air pressure in her bicycle tires early in the morning when it is cool outside.  she will most likely observe that the tire pressure will be the higher when the temperature is the higher.

The Pressure is the result of the collisions of the gas molecules with the walls of the tire. The Temperature is the  measure of the average kinetic energy in the gas molecules. When the temperature will increases, the gas molecules will move the more quickly and they will collide with the tire walls  frequently and the more force.

This is according to the kinetic molecular theory as the Pressure and the temperature are the directly proportional.

To learn more about kinetic molecular theory here

https://brainly.com/question/17121882

#SPJ4

With traces of water vapor, carbon dioxide, argon, and other gases, air is a mixture of gases made up of 78% nitrogen and 21% oxygen.

Three gases, nitrogen, oxygen, and argon, account for more than 99% of the air's composition. In very minute amounts, air also contains various gases, including gaseous water, sometimes known as water vapor. Solids and liquids can also be found in air. Pollen, dust, and soot are examples of solids in the air. The gaseous elements nitrogen, oxygen, and lower concentrations of other elements make up the homogenous combination known as air. N2 (78%), O2 (21%), argon (1%), carbon dioxide (0.03%), and water vapor are among the several gases that make up air. These vapors have variable chemical compositions.

Learn more about nitrogen from here:

https://brainly.com/question/16711904

#SPJ4

To find the final number of moles of gas in a balloon after deflation, you can use the ideal gas law equation, which is PV = nRT

PV = nRT

where P is the  pressure of a  gas , V is the volume of the gas , n is the number of moles of gas, R is the gas constant, and T is the gas's temperature.

If you know the initial pressure, volume, temperature, and number of moles of gas, and the final pressure and volume after deflation, you can use the equation to calculate the final number of moles of gas in the balloon at final pressure .

Here's an example:

Initial conditions: P1, V1, T1, n1

Final conditions: P2, V2, T2, n2

We know that T1 = T2 (the temperature is constant)

So, we can substitute these values into the ideal gas law equation:

P1V1 = n1RT

P2V2 = n2RT

Solving for n2, we get:

n2 = (P1V1) / RT = (P2V2) / RT

Therefore, the final number of moles of gas in the balloon after deflation can be determined by using this equation.

To learn more about Ideal gas law equation :

https://brainly.com/question/4147359

#SPJ4

The pH of the solution obtained by dissolving two extra-strength aspirin tablets in 270 mL of water is approximately 3.54.

pH is a measure of the acidity or (alkalinity) of a solution. It is defined as the negative logarithm of the hydrogen ion (H+) concentration in moles per liter (mol/L) in an aqueous solution. The pH scale ranges from 0 to 14, with 7 being neutral pH. Solutions with a pH less than 7 are considered acidic, while solutions with a pH greater than 7 are considered basic or alkaline.

To calculate the pH of a solution containing acetylsalicylic acid (aspirin), we need the concentration of the acid in the solution. Each extra-strength aspirin tablet contains 450 mg of acetylsalicylic acid, so dissolving two tablets in 270 mL of water gives a total concentration of 2 × 450 mg / 270 mL = 1667 mg/mL.

Next, we need to convert the concentration to moles. Acetylsalicylic acid has a molecular weight of 180.16 g/mol, so the number of moles in the solution is 1667 mg / 180.16 mg/mol = 9.24 x [tex]10^-{4}[/tex] moles.

The pKa of acetylsalicylic acid is 3.5, so at a pH of 7.0, the majority of the acetylsalicylic acid will exist in its acidic form (as the acetylsalicylic acid anion). The concentration of acetylsalicylic acid in its acidic form can be calculated using the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A^-]/[HA])[/tex]

Where [tex][A^-][/tex]is the concentration of acetylsalicylic acid anion and [HA] is the concentration of acetylsalicylic acid. Rearranging the equation and substituting the values we have, we get:

[tex]log([A^-]/[HA]) = pH - pKa[A^-]/[HA] = 10^(pH - pKa) = 10⁽⁷⁻³°⁵⁾ = 316.23[A^-] = 316.23 × 9.24 x 10⁻⁴ = 2.92 x 10⁻⁴ M[/tex]

Finally, the pH of the solution can be calculated from the concentration of acetylsalicylic acid anion:

[tex]pH = -log([A^-]) = -log(2.92 x 10⁻⁴) = 3.54[/tex]

So, the pH of the solution obtained by dissolving two extra-strength aspirin tablets in 270 mL of water is approximately 3.54.

To know more about Henderson-Hasselbalch equation, visit:

brainly.com/question/13423434

#SPJ4

To determine the mass percent of FeO in the original mixture, we need to balance the equation for the reaction that takes place when the mixture is heated. The reaction between Fe3O4 and FeO to form Fe2O3 is as follows:

Fe3O4 + FeO --> Fe2O3

Next, we'll use the law of conservation of mass to balance the equation. According to this law, the total mass of the reactants must equal the total mass of the products.

We'll start by assuming that the number of moles of FeO in the mixture is 1.0. Then, the number of moles of Fe3O4 can be calculated as follows:

4.148 g Fe2O3 / (71.844 g/mol) = 0.058 mol Fe2O3

0.058 mol Fe2O3 / (1 mol FeO / 2 mol Fe2O3) = 0.116 mol FeO

0.116 mol FeO x (55.845 g/mol) = 6.468 g FeO

So, the mass of FeO in the original mixture was 6.468 g and the mass of Fe3O4 was 3.854 g - 6.468 g = -2.614 g.

The mass percent of FeO in the original mixture can be calculated as follows:

(6.468 g FeO / (6.468 g FeO - 2.614 g Fe3O4)) x 100% = 71.12%

So, the mass percent of FeO in the original mixture was 71.12%.

To know more about law of conservation of mass, visit the link given below:

https://brainly.com/question/2890660

#SPJ4

The most effective in removing ink stains from a white blouse by comparing the degree to which each solvent is able to remove the stain. The solvent that results in the least visible ink stain will be considered the most effective.

A solvent in chemistry is a liquid that is used to dissolve a solute (another substance) to form a solution. The solvent acts as the medium in which the solute is dissolved, allowing it to be dispersed evenly throughout the solution. The choice of solvent can greatly impact the solubility, reactivity, and overall properties of the solution.

There are many types of solvents, including polar and non-polar solvents. Polar solvents have a positive and negative end and are able to dissolve polar compounds. An example of a polar solvent is water. Non-polar solvents, on the other hand, do not have a polar structure and are able to dissolve non-polar compounds. An example of a non-polar solvent is hexane.

To learn more about Solvent visit here:

brainly.com/question/14797683

#SPJ4

When the semi-liquid material near the core is heated at high temperatures, it becomes less dense and rises. As it rises, it cools and becomes more dense, eventually sinking back down towards the core.

Heat is transferred through the currents in Earth's mantle due to a process known as convection. In this process, heat is transferred by the movement of a fluid. In the mantle, the semi-liquid material acts as a fluid, which constantly moves from areas with high temperatures near the core to areas with cooler temperatures near Earth's surface.

This constant movement of semi-liquid material, which is driven by the differences in temperature helps to distribute heat evenly throughout the mantle also, it prevents any localized hotspots from developing.

Thus, the convection currents in the mantle play a critical role in controlling the transfer of heat within the earth and helps to regulate the overall thermal energy balance of the planet earth.

To know more about earth's mantle here

https://brainly.com/question/30611692

#SPJ4

8.16 g H is produced by 8.16% H, 48.64 g C by 48.64 g C, and 43.20 g O by 43.20% O. If necessary, divide these numbers by integers to produce whole numbers; if one of the numbers is altered, the others must be altered as well.The empirical formula of  [tex]C3H6O2[/tex]  is methyl acetate.

The chemical formula of methyl acetate is 48.64% carbon, 8.16% hydrogen, and 43.20% oxygen. The empirical formula is [tex]CH2O[/tex]. [tex]CH3N[/tex] empirical formula. [tex]C3H3O[/tex] is the empirical formula. Consider that we have 100 g of the material. We therefore have 29.0 g of oxygen, 5.5 g of hydrogen, and 65.5 g of carbon. [tex]C3H3O[/tex] is the empirical formula. A chemical having a mass of only 48.64% C and 8.16% H is composed entirely of carbon, hydrogen, and oxygen. The empirical formula for the chemical is what AI Recommended Reaction This substance's empirical formula is [tex]C2H6O2[/tex].

Learn more about substance here:

https://brainly.com/question/24372098

#SPJ4

Explanation:

1 mole of HNO3 reacts with 1 mole of S to produce 1 mole of H2SO4, 6 moles of NO2, and 2 moles of H2O.

So, when 2 grams of HNO3 (1 mole) reacts, it produces 2 moles of H2O, which is equal to 2 x 18 = 36 grams.

Therefore, 36 grams of water can be made when 2 grams of HNO3 are consumed

The greater the speed of gas particles in a container, the higher the pressure of the gas.

This is because the pressure is directly proportional to the kinetic energy of the gas particles, and the kinetic energy of a gas particle is directly proportional to its speed squared. The pressure of a gas is usually expressed as a force per unit area, and can be calculated by multiplying the average kinetic energy of the gas particles by the number of particles per unit volume. Since the kinetic energy of a particle is proportional to the square of its velocity, if we double the velocity of the gas particles, we will see an increase in the average kinetic energy and thus an increase in the pressure. Thus, the greater the speed of gas particles in a container, the higher the pressure of the gas.

Learn more about gas here:

https://brainly.com/question/3637358

#SPJ4

A chemist employed by an airplane manufacturer investigates new adhesives for the purpose of building airplanes without rivets. So, she is engaged in applied research.

Research means findings and discoveries. A researcher can carry out either basic research or applied research. Every research topic begins with an explanation of the aim of the investigation, which describes identifying the research method or the strategy used to carry out the research.

Applied research is a non-systematic approach to solving certain difficulties or problems . These concerns or problems may affect a person, a group, or the entire society. It is referred to as "non-systematic" because it directly aim at seeking solutions.

It makes use of the existing scientific instruments to identify solutions. So, it is frequently referred to as a "scientific process".

The three different categories in research are as follows: Action research, Research and Development and evaluation research.

To know more about research here

https://brainly.com/question/30353052

#SPJ4

The mass of oxygen gas that will react with 50 grams of ammonia gas is 57.28 grams.

Stoichiometry is the quantitative relationship between the reactants and products of a specific reaction or equation.

According to this question, ammonia gas reacts with oxygen gas to produce nitrogen gas and water.

Based on the reaction, 1 mole of ammonia gas reacts with 1 mole of oxygen.

50 gram of ammonia gas is equivalent to 1.79 moles

1.79 moles will react with 1.79 moles of oxygen gas.

mass of oxygen gas = 1.79 moles × 32g/mol = 57.28 grams.

Learn more about stoichiometry at: https://brainly.com/question/29775083

#SPJ1

Liver contains digestive enzymes to break down harmful substances.

Digestive enzymes: Digestive enzymes are a group of enzymes which break down polymeric macromolecules into their smaller building blocks, in order to facilitate their absorption into the cells of the body.

Digestive enzymes are found in the digestive tracts of animals (including humans) as well as in the tracts of carnivorous plants, where they aid in the digestion of food, as well as inside the cells, especially in their lysosomes, where they function to maintain the cellular survival.

Liver: The liver contains various digestive enzymes, such as liver alcohol dehydrogenase, which helps to break down toxic substances such as alcohol and drugs, and convert them into less harmful substances that can be excreted from the body.

To know more about Digestive enzymes here

https://brainly.com/question/30312574

#SPJ4

Concentration per unit mass may be used instead of volume. Therefore, 4.39M is the concentration of given solution.

Concentration in chemistry refers to the quantity of a material in a specific region. Concentration is sometimes defined as the ratio of a solution's solute to either solvent and total solution. Concentration is often represented as mass per volume.

However, solute concentration can also be represented in moles or volume units. Concentration per unit mass may be used instead of volume. While concentration is often used to chemical solutions, it may be computed for any combination.

molarity = number of moles/ volume of solution

number of moles= 792/ 180.15=4.39mol

molarity =4.39/ 0.001=4.39M

Therefore, 4.39M is the concentration of given solution.

To learn more about concentration, here:

https://brainly.com/question/14803618

#SPJ1

If magnesium nitrate and sodium hydroxide are reacted together then a white jelly like precipitate is formed.

The reaction between magnesium nitrate and sodium hydroxide produces magnesium hydroxide, a white, jelly-like precipitate:

Mg(NO3)2 + 2NaOH → Mg(OH)2 + 2NaNO3

Magnesium hydroxide is a soft, white, jelly-like solid that is insoluble in water and has a basic nature. It is often used as a neutralizing agent and as an antacid. The reaction between magnesium nitrate and sodium hydroxide is a neutralization reaction, where the strong base sodium hydroxide reacts with the weak acid magnesium nitrate to form a salt (magnesium hydroxide) and a neutral solution of sodium nitrate.

Learn more about sodium hydroxide here:

https://brainly.com/question/18723610

#SPJ4

A carbon atom that is joined to four distinct groups or atoms is known as a chiral centre. The stereochemistry of the molecule and its optical activity are both governed by the orientation of the substituents.

A carbon atom attached to four separate substituents is referred to as a chiral centre or stereocenter. As the orientation of the substituents surrounding the chiral centre can change the molecule's properties, such as its reactivity, solubility, and biological activity, it is a crucial idea in organic chemistry. Wedge-dash representations, which depict the spatial arrangement of the substituents, are used to determine the orientation of the chiral centre. Enantiomers, which are non-superimposable mirror reflections of one another, can be distinguished from one another using this. As enantiomers can have dramatically diverse biological effects even when they share the same chemical makeup, chiral centres play a significant role in medication design.

Learn more about chiral centre here:

https://brainly.com/question/16812236

#SPJ4

The molality of ammonia in an aqueous solution is 22.8 M. Then the mole fraction of ammonia in the solution is 0.29.

The mole fraction of a substance expresses the ratio of the number of moles of solute or solvent to the number of moles of solution. Here are the mole fraction formulas for the solute and solute:

Xt = nt / nt + np.

xp = np / nt + np.

NH₃ molality = 22.8 M

This means that if we take 1 kg of H₂O we have 22.8 M NH₃.

Moles of H2O in 1 kg = 1000/18

Mole fraction of NH₃ = Moles NH3/Moles NH3 + Moles H₂O

Mole fraction of NH₃ = 22.8/22.8 + 1000/18

Mole fraction of NH₃ = 22.8/78.35

Mole fraction of NH₃ = 0.29

So, the mole fraction of NH₃ is 0.29.

Learn more about mole fractions at https://brainly.com/question/14783710

#SPJ4

Boiling point of the solution prepared by dissolving 12.30 g of ordinary sugar (sucrose, c12h22o11, 342.3 g/mol) in 35.00 g of water is 100.5°C.

To calculate the boiling point of the solution, we need to determine the boiling point elevation caused by the addition of sucrose to the water. The boiling point elevation of a solution is proportional to the molality (moles of solute per kilogram of solvent) of the solute.

First, let's calculate the molality of the solution:

12.30 g sucrose / 342.3 g/mol = 0.0359 moles sucrose

35.00 g water / 1000 g/kg = 0.035 kg water

Molality = 0.0359 moles / 0.035 kg = 1.03 mol/kg

Next, we can use the formula for boiling point elevation to calculate the boiling point of the solution:

ΔTb = Kb * molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for water (0.512 K kg/mol), and molality is the molality of the solution.

ΔTb = 0.512 K kg/mol * 1.03 mol/kg = 0.529 K

Finally, we can add the boiling point elevation to the boiling point of pure water (100°C) to obtain the boiling point of the solution:

Boiling point of solution = 100°C + ΔTb = 100°C + 0.529 K = 100.529°C (approximately 100.5°C)

So, the boiling point of the solution is 100.5°C.

To  know more about molality please refer:

https://brainly.com/question/26921570

#SPJ4

Deforestation - destroys natural carbon sinks leading to more CO₂ in the air

Burning fossil fuels - primary cause of human-created carbon emissions

Waste disposal in landfills - emits methane from decomposing waste disposal in lands​

Greenhouse effects refer to the effects caused by the greenhouse gases' absorption of solar radiation to raise the temperature of the atmosphere. The greenhouse gases include carbon dioxide, methane, water vapor, etc.

Deforestation destroys forests which serve as carbon dioxide sinks. The burning of fossil fuels leads to the emission of carbon dioxide and waste disposal in landfills is a source of methane gas. All these gases help create the greenhouse effect.

More on greenhouse effects can be found here: https://brainly.com/question/13706708

#SPJ1

Match the human activity with how it intensifies the greenhouse effect.

deforestation

burning fossil fuels

waste disposal in landfills

primary cause of human-created

carbon emissions

destroys natural carbon sinks,

leading to more co, in the air

emits methane from decomposing

matter

All the living organisms need water to survive in the earth. The transport of water can be considered as a solution of water supply on earth. Most of the people suffers from water scarcity.

Water is regarded as the universal solvent and plays an important role in the survival of all living organisms. The preservation of water mainly refers to protect and control the use of water and its associated resources.

It is very important to preserve water. Because everyday the population is increasing and the water resources are reducing. The preservation of water helps us to supply large amount of water for longer usage.

Some methods to preserve water are:

Water supply means providing water to the public. Here water is supplied through pipes, pumps, etc. To make healthy individuals in our society transport of water is essential.

To know more about water, visit;

https://brainly.com/question/23469916

#SPJ1

a. The moles of H3PO4 would be 0.24 mol

b. The grams of H3PO4 would be 48.02 grams

c. The grams of tetraphosphorus decoxide would be 14.2 grams

d. The moles of H3PO4 would be 3.59 mol

The balanced equation of the reaction is as follows:

[tex]P_4O_{10}(g) + 6 H_2O(l) -- > 4 H_3PO_4(aq)[/tex]

The mole ratio of water and H3PO4 = 3:2

Mole of 6.46 grams of water = 6.46/18 = 0.36 mol

Equivalent mole of H3PO4 = 2/3 x 0.36 = 0.24 mol

With 0.730 moles of water, the equivalent mole of H3PP4 will be: 2/3 x 0.730 = 0.49 moles

Mass of 0.49 mol H3PO4 = 0.49 x 98 = 48.02 grams

Mole ratio of tetra phosphorus decoxide and water = 1:6

Mole of 4.78 grams of water = 4.78/18 = 0.27 mol

Equivalent mole of tetra phosphorus decoxide = 0.27/6 = 0.05 mol

Mass of 0.05 mol tetra phosphorus decoxide = 0.05 x284 = 14.2 grams

Mole ratio of tetraphosphorus decoxide and H3PO4 = 1:4

Mole of tetraphosphorus decoxide = 0.898

Equivalent mole of H3PO4 = 0.898 x 4 = 3.59 mol

More on stoichiometric problems can be found here: https://brainly.com/question/14301905

#SPJ1

The rate constant k for the overall chemical reaction in terms of k_1, k_2 is Equal.

A chemical response is a system that results in the chemical transformation of one set of chemical materials to another. Classically, chemical reactions embody adjustments that best contain the positions of electrons inside the forming and breaking of chemical bonds between atoms, and not using an exchange to the nuclei (no change to the factors present), and can frequently be described by way of a chemical equation. Nuclear chemistry is a sub-area of chemistry that includes the chemical reactions of risky and radioactive factors in which each digital and nuclear change can arise.

The substance (or substances) to begin with worried in a chemical response are called reactants or reagents. Chemical reactions are commonly characterized by a chemical change, and they yield one or extra products, which usually have residences one of a kind from the reactants.

To learn more about Reaction visit here

brainly.com/question/13440548

#SPJ4

The emitted fluorescent light has longer wavelength and lower energy because it lost some energy to the solvent molecules and some fraction of energy is dissipated as heat.

A material that has absorbed light or other electromagnetic radiation will emit light when it undergoes fluorescence. It has a luminescent quality. Most of the time, the emitted light has a lower photon energy than the absorbed radiation because it has a longer wavelength.

Fluorescence can be seen when the emitted light is in the visible spectrum while the absorbed radiation is in the ultraviolet (UV) region of the electromagnetic spectrum, which is invisible to the human eye.

The fluorescent photons have lower energy. The non-radiative  vibrational transitions taking place in between causes dissipation of energy as heat and some energy is transferred to the solvent molecules.

Find more on fluorescence :

https://brainly.com/question/14892301

#SPJ1

The answer is c. the number of protons it has. The number of protons in the nucleus of an atom determines the element's atomic number on the Periodic Table, which in turn determines its identity.

All atoms of the same element have the same number of protons, and this number is unique to each element. For example, carbon has six protons and is atomic number 6.

Atoms of different elements can form chemical bonds with each other in order to form molecules, compounds, and other substances. The type of bond formed depends on the number of electrons in the outermost shell of each atom and the attraction between them. For example, atoms with an even number of electrons in their outermost shell tend to form covalent bonds with other atoms, while atoms with an odd number of electrons tend to form ionic bonds.

Learn more about atom's :

https://brainly.com/question/17545314

#SPJ4

586cm^3 is the volume of hydrogen if the temperature is raised to 67°c and the pressure is decreased to 80 kpa​.

Which three ideal gas laws are there?

According to Boyle's Law, gas volume grows as pressure lowers. According to Charles' Law, a gas expands in volume as its temperature rises. Additionally, Avogadro's Law states that as gas concentration rises, so does its volume.

The definition of an ideal gas is a gas in which the volume of the molecules and the forces between the molecules are so minimal as to not affect the behavior of the gas.

P1V1/T1 = P2V2/T2

V2 = ?

P1 = 196kPa

V1 = 250cm^3

T1 = 17degree celcius

P2 = 80kPa

T2 = 67 degree celcius

V2 = P1V1T2/T1P2

     = 196*250*67/17*80

     = 586cm^3

To learn more about ideal gas law use link below:

https://brainly.com/question/25290815

#SPJ1