1. Which of the points below
is a solution to the system:
y = 3x + 2 and y = 5x - 6?
A. (3, 11)
B. (4, 14)
C. (2, 4)
D. (18, 60)

The absolute maximum is 198 and the absolute minimum is 12.To find the absolute maximum and minimum values of the given function, we need to find the critical points and endpoints of the interval and evaluate the function at those points. Then, we can compare the values to determine the maximum and minimum values.

(a) Interval = [-3, -1]

To find critical points, we take the derivative of the function and set it to zero:

f'(x) = 4x^3 - 20x = 0

=> 4x(x^2 - 5) = 0

This gives us critical points at x = -√5, 0, √5. Evaluating the function at these points, we get:

f(-√5) ≈ 11.71

f(0) = 12

f(√5) ≈ 11.71

Also, f(-3) ≈ 78 and f(-1) = 2

Therefore, the absolute maximum is 78 and the absolute minimum is 2.(b) Interval = [-4, 1]

Using the same method, we find critical points at x = -√3, 0, √3. Evaluating the function at these points and endpoints, we get:

f(-√3) ≈ 13.54

f(0) = 12

f(√3) ≈ 13.54

f(-4) = 160

f(1) = 3

Therefore, the absolute maximum is 160 and the absolute minimum is 3.(c) Interval = [-3, 4]

Again, using the same method, we find critical points at x = -√2, 0, √2. Evaluating the function at these points and endpoints, we get:

f(-√2) ≈ 14.83

f(0) = 12

f(√2) ≈ 14.83

f(-3) ≈ 198

f(4) ≈ 188.

For such more questions on Absolute minimum:

https://brainly.com/question/31501241

#SPJ11

Answer:

1) 23 degrees

Step-by-step explanation:

What is a chord?  A chord is a line segment that intersects another chord in a circle at 2 points.  The angle formed by the 2 chords is half of the arc measure of the 2 points.

Given this definition, we can see that <HKZ has to be half of the arc HZ.

To find HZ, add up the other arc measures and subtract from 360 degrees:

360-(88+112+114)

=46

This means that HZ is 46 degrees.

Like I said before, <HKZ has to be half of HZ, which is 46, so:

46/2

=23

This makes <HKZ 23 degrees.

Hope this helps! :)

Pooling the population proportion estimates and the standard error of the difference between these estimates is justified when conducting significance tests about the difference between population proportions under certain conditions.

The pooling approach assumes that the two population proportions being compared are equal. This assumption allows us to estimate a common population proportion from the combined sample data, which leads to a more precise estimate of the standard error of the difference between the proportions.

The justification for pooling relies on the following conditions:

1. Independence: The samples from which the proportions are estimated must be independent of each other. This means that the observations within each sample should be unrelated to the observations in the other sample.

2. Random Sampling: The samples should be randomly selected from their respective populations. This helps to ensure that the samples are representative of their populations and that the estimates can be generalized.

3. Large Sample Sizes: Ideally, both samples should be large enough for the sampling distribution of each proportion to be approximately normal. This assumption is necessary for accurate estimation of the standard error.

If these conditions are met, pooling the proportion estimates and the standard error is justified because it improves the precision of the estimate and leads to more accurate hypothesis testing. By pooling the estimates, we can obtain a more reliable combined estimate of the population proportion, which results in a smaller standard error and more robust statistical inferences about the difference between the population proportions.

Learn more about pooling here:

https://brainly.com/question/27907649

#SPJ1

If 2^x=3 the answer is 9/4 equal.

Given, 2^x = 3

We need to find 4^(-x)

Let's first write 4 in terms of 2.4 = 2 × 2

Now, we can write 4^(-x) in terms of 2 as (2 × 2)^(-x) = 2^(-x) × 2^(-x) = (2^(-x))^2

We know that 2^x = 3

Now, let's find 2^(-x) using the above expression.

2^x = 32^(-x) × 2^x = 2^(-x) × 32^(-x) = 3/2

Now, 4^(-x) can be written as (2^(-x))^2

Substituting 2^(-x) = 3/2, we get4^(-x) = (2^(-x))^2= (3/2)^2= 9/4

Hence, the answer is 9/4.

4^(-x) = 9/4

Given, 2^x = 3

We need to find 4^(-x)

Let's first write 4 in terms of 2.4 = 2 × 2

Now, we can write 4^(-x) in terms of 2 as (2 × 2)^(-x) = 2^(-x) × 2^(-x) = (2^(-x))^2

We know that 2^x = 3

Now, let's find 2^(-x) using the above expression.

2^x = 32^(-x) × 2^x = 2^(-x) × 32^(-x) = 3/2

Now, 4^(-x) can be written as (2^(-x))^2

Substituting 2^(-x) = 3/2, we get4^(-x) = (2^(-x))^2= (3/2)^2= 9/4

Hence, the answer is 9/4.

To know more about expression visit:

https://brainly.com/question/28170201

#SPJ11

The sum of a vector in W and a vector orthogonal to W is [tex]y = \begin{bmatrix} -3 \\ 5 \\ 2 \end{bmatrix}[/tex]

In this problem, we are given two vectors → u 1 and → u 2 that span a subspace W, and another vector → y. Our goal is to write → y as the sum of a vector in W and a vector orthogonal to W.

To do this, we first need to find a basis for W. A basis is a set of linearly independent vectors that span the subspace. In this case, we can use → u 1 and → u 2 as a basis for W, because they are linearly independent and span the same subspace as any other pair of vectors that span W. We can write this basis as a matrix A:

A = [tex]\begin{bmatrix} 1 & -4 \\ 1 & 5 \\ 1 & -1 \end{bmatrix}[/tex]

Next, we need to find the projection of → y onto W. The projection of → y onto a subspace W is the closest vector in W to → y. This vector is given by the formula:

[tex]projW(y) = A(A^TA)^{-1}A^Ty[/tex]

where [tex]A^T[/tex] is the transpose of A and [tex](A^TA)^{-1}[/tex] is the inverse of the matrix A^TA. Using the given values, we get:

[tex]projW(y) = \begin{bmatrix} 1 & -4 \\ 1 & 5 \\ 1 & -1 \end{bmatrix} \left( \begin{bmatrix} 1 & 1 & 1 \\ -4 & 5 & -1 \end{bmatrix} \begin{bmatrix} 1 & -4 \\ 1 & 5 \\ 1 & -1 \end{bmatrix} \right)^{-1} \begin{bmatrix} 1 & 1 & 1 \\ -4 & 5 & -1 \end{bmatrix} \begin{bmatrix} -3 \\ 5 \\ 2 \end{bmatrix} = \begin{bmatrix} 7/3 \\ 1/3 \\ 8/3 \end{bmatrix}[/tex]

This is the vector in W that is closest to → y. To find the vector orthogonal to W, we subtract this projection from → y:

[tex]z = y - projW(y) = \begin{bmatrix} -3 \\ 5 \\ 2 \end{bmatrix} - \begin{bmatrix} 7/3 \\ 1/3 \\ 8/3 \end{bmatrix} = \begin{bmatrix} -16/3 \\ 14/3 \\ -2/3 \end{bmatrix}[/tex]

This vector → z is orthogonal to W because it is the difference between → y and its projection onto W. We can check this by verifying that → z is perpendicular to both → u 1 and → u 2:

[tex]z . u_1 = \begin{bmatrix} -16/3 \\ 14/3 \\ -2/3 \end{bmatrix} \cdot \begin{bmatrix} 1 \\ 1 \\ 1 \end{bmatrix} = 0[/tex]

[tex]z . u_2 = \begin{bmatrix} -16/3 \\ 14/3 \\ -2/3 \end{bmatrix} \cdot \begin{bmatrix} -4 \\ 5 \\ -1 \end{bmatrix} = 0[/tex]

The dot product of → z with → u 1 and → u 2 is zero, which means that → z is orthogonal to both vectors. Therefore, → z is orthogonal to W.

We can check that → y = projW(→y) + → z, which means that → y can be written as the sum of a vector in W (its projection onto W) and a vector orthogonal to W (→ z):

[tex]projW(y) + z = \begin{bmatrix} 7/3 \\ 1/3 \\ 8/3 \end{bmatrix} + \begin{bmatrix} -16/3 \\ 14/3 \\ -2/3 \end{bmatrix} = \begin{bmatrix} -3 \\ 5 \\ 2 \end{bmatrix} = y[/tex]

Therefore, we have successfully written → y as the sum of a vector in W and a vector orthogonal to W.

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

The specific form of the density function is crucial in determining the likelihood function and optimizing it to find the MLE.

To determine the maximum likelihood estimator (MLE) of the parameter θ for a sample from a distribution with a given density function, we need the specific density function. Unfortunately, the density function you mentioned is missing from your question.

the density function for the distribution, and I will be able to assist you in finding the maximum likelihood estimator of θ.

In general, the MLE of a parameter θ is obtained by finding the value of θ that maximizes the likelihood function, which is derived from the density function and the observed sample. The likelihood function represents the probability of observing the given sample for different values of the parameter θ.

The specific form of the density function is crucial in determining the likelihood function and optimizing it to find the MLE.

To know more about Density function .

https://brainly.com/question/30403935

#SPJ11

Answer:

To find the maximum likelihood estimator of θ, we need to consider the likelihood function, which is the product of the density function evaluated at each observation in the sample.

We can then take the logarithm of the likelihood function to simplify the calculations. The maximum likelihood estimator is the value of θ that maximizes the likelihood function. This can be found by taking the derivative of the logarithm of the likelihood function with respect to θ and setting it equal to zero. Solving for θ will give us the maximum likelihood estimator. The estimator is a statistical tool used to estimate a population parameter based on a sample from the population. The density and distribution of the population are important in determining the shape and characteristics of the likelihood function, which ultimately affects the value of the maximum likelihood estimator.
Hi! To determine the maximum likelihood estimator (MLE) of θ for a given sample from a distribution with a known density function, follow these steps:

1. Write down the probability density function (pdf) for the distribution.
2. Calculate the likelihood function by taking the product of the pdf for each observation in the sample.
3. Take the natural logarithm (log-likelihood) of the likelihood function to simplify calculations.
4. Differentiate the log-likelihood function with respect to θ.
5. Set the derivative equal to zero and solve for θ.

The resulting value of θ is the maximum likelihood estimator, which estimates the true parameter value that maximizes the likelihood of observing the given sample from the specified distribution.

Learn more about density function here: brainly.com/question/31962065

#SPJ11

x ≡ 859 (mod 756) is the solution to the system of congruences.

To solve the system of congruences x ≡ 7 (mod 9), x ≡ 4 ( mod 12) and x ≡ 16 (mod 21), we can use the method of simultaneous equations.

Step 1: Start with the first two congruences, x ≡ 7 (mod 9) and x ≡ 4 ( mod 12). We can write these as a system of linear equations:

x = 9a + 7

x = 12b + 4

where a and b are integers. Solving for x, we get:

x = 108c + 67

where c = 4a + 1 = 3b + 1.

Step 2: Substitute x into the third congruence, x ≡ 16 (mod 21), to get:

108c + 67 ≡ 16 (mod 21)

Simplify the congruence:

3c + 2 ≡ 0 (mod 21)

Step 3: Solve the simplified congruence, 3c + 2 ≡ 0 (mod 21), by trial and error or using a modular inverse. In this case, we can see that c ≡ 7 (mod 21) satisfies the congruence.

Step 4: Substitute c = 7 into the expression for x:

x = 108c + 67 = 108(7) + 67 = 859

Therefore, the solutions to the system of congruences are x ≡ 859 (mod lcm(9,12,21)), where lcm(9,12,21) is the least common multiple of 9, 12, and 21, which is 756.

Hence, x ≡ 859 (mod 756) is the solution to the system of congruences.

Learn more about congruences here

https://brainly.com/question/30818154

#SPJ11

If someone is using simple random sampling with replacement, their main concern should be ensuring that each item in the population has an equal chance of being selected in each round of sampling.

This means that the sample should be truly random and that the selection process should not be biased in any way.

Additionally, the sample size should be large enough to accurately represent the population.

Finally, the researcher should consider the potential sources of error or bias in their sampling process, and take steps to minimize them as much as possible.

By doing so, they can ensure that their sample is both reliable and valid and that their results are generalizable to the larger population.

Know more about simple random sampling here:

https://brainly.com/question/13219833

#SPJ11

The area of the rectangle in terms of x is given by the expression (L • W)(x) = 28x³ - 16x², which is option (D). The length and width of the rectangle are both functions of x, so the area is also a function of x. The expression (L • W)(x) represents the product of the two functions, which gives us the area of the rectangle.

To find the area of the rectangle, we can use the formula A = LW, where L and W represent the length and width of the rectangle, respectively. Since the length is given by the function L(x) = 4x and the width is given by the function W(x) = 7x² - 4x, we can substitute these expressions into the formula for the area:A(x) = L(x) \cdot W(x)= 4x \ cdot (7x^2 - 4x)= 28x^3 - 16x^2.

Thus, the area of the rectangle in terms of x is given by the expression (L • W)(x) = 28x³ - 16x², which is option (D). The length and width of the rectangle are both functions of x, so the area is also a function of x. The expression (L • W)(x) represents the product of the two functions, which gives us the area of the rectangle.

To know more about Rectangle  visit :

https://brainly.com/question/15019502

#SPJ11

The true percent relative error based on the analytical solution is 283.33%

The given problem involves the use of the composite Simpson's 1/3 rule to approximate the solution of a given equation, and then calculating the true percent relative error based on the analytical solution.

The composite Simpson's 1/3 rule is a numerical method used to approximate the value of a definite integral. It involves dividing the interval of integration into several subintervals and using a quadratic polynomial to approximate the integrand on each subinterval.

The formula for the Composite Simpson's 1/3 rule is given by:

∫abf(x)dx ≈ (b-a)/6 [f(a) + 4f((a+b)/2) + f(b)] + (b-a)/12 [f(a) - 2f((a+b)/2) + f(b)]

where n is the number of subintervals and h is the width of each subinterval.

To use this formula to solve the given equation y = 4x - 2, we need to first determine the limits of integration, which are not given in the problem. Assuming that we need to find the integral of y with respect to x over the interval [0, 1], we can plug in the equation of y into the integral formula:

∫04()−2dx ≈ (1-0)/6 [4(0) + 4(4(1/2)-2) + 4(4(1)-2)] + (1-0)/12 [4(0) - 2(4(1/2)) + 4(1)-2]

Simplifying this expression gives us:

∫04()−2dx ≈ 3.6667

This is our approximate solution using the composite Simpson's 1/3 rule. To calculate the true percent relative error based on the analytical solution, we need to first find the analytical solution to the integral.

Integrating the given equation y = 4x - 2 with respect to x over the interval [0, 1] gives us:

∫14()−2dx

= [2x² - 4x] from 0 to 1

Substituting the limits of integration gives us:

∫14()−2dx

= 2(1)² - 4(1) - [2(0)² - 4(0)]

= -2

Therefore, the true value of the integral is -2.

The true percent relative error based on the analytical solution can be calculated using the formula:

True percent relative error = (|approximate solution - true solution|/|true solution|) x 100%

Substituting the values gives us:

True percent relative error = (|3.6667 - (-2)|/|-2|) x 100% = 283.33%

Therefore, The true percent relative error based on the analytical solution is 283.33%.

To know more about Simpsons 1/3 Rule here

https://brainly.com/question/31586075

#SPJ4

Complete Question

Solve the given equation y = 4x - 2, using the composite Simpson's 1/3 rule with n = 4, and determine the true percent relative error based on the analytical solution. (round the solution of the equation)

The interquartile range of a data-set is given by the difference between the third quartile and the first quartile.

The interquartile range of a data-set is given by the difference of the third quartile by the first quartile of the data-set.

The quartiles of a data-set are given as follows:

More can be learned about the interquartile range at brainly.com/question/12323764

#SPJ1

As the condition "1. Decreasing absolute values and 2. Limit of the terms" of the Alternating Series Test are met, so the series converges.

The given series is an alternating series, which can be written as:
Σ((-1)^n / (3n+1)), with n ranging from 1 to infinity.

To test for convergence using the Alternating Series Test, we need to verify two conditions:

1. The absolute value of the terms must be decreasing: |a_(n+1)| ≤ |a_n|
2. The limit of the terms must approach zero: lim(n→∞) a_n = 0

Let's examine these conditions:

1. Decreasing absolute values:
a_n = (-1)^n / (3n+1)
a_(n+1) = (-1)^(n+1) / (3(n+1)+1) = (-1)^(n+1) / (3n+4)
Since n is always positive, it's clear that the denominators (3n+1) and (3n+4) increase as n increases. Therefore, the absolute values of the terms decrease.

2. Limit of the terms:
lim(n→∞) |(-1)^n / (3n+1)| = lim(n→∞) (1 / (3n+1))
As n goes to infinity, the denominator (3n+1) grows without bounds, making the fraction approach zero. Thus, lim(n→∞) (1 / (3n+1)) = 0.

Both conditions of the Alternating Series Test are met, so the series converges.

Know more about the Alternating Series Test

https://brainly.com/question/30400869

#SPJ11

Using Green's theorem, the counterclockwise circulation is 3/2, and the counterclockwise outward flux is 5/6.

Green's theorem relates the circulation of a vector field around a closed curve to the outward flux of the curl of the vector field over the region bounded by that curve. In this case, we are given the vector field F(x, y) = (x + y)i + (x^2 + y^2)j and the triangle bounded by x = 1, y = 0, and y = x.

To calculate the counterclockwise circulation, we integrate the dot product of F and the tangent vector along the boundary of the triangle. The circulation can be written as ∮C F · dr, where C represents the curve bounding the triangle. Parameterizing the curve C, we have r(t) = (t, t) for 0 ≤ t ≤ 1. The tangent vector dr/dt is (1, 1).

Evaluating the circulation, we have ∮C F · dr = ∫₀¹ (t + t)(1) + (t^2 + t^2)(1) dt = ∫₀¹ (2t + 2t^2) dt = [t^2 + (2/3)t^3]₀¹ = 1 + (2/3) = 3/2.

Next, we need to find the counterclockwise outward flux. The outward flux can be calculated by integrating the curl of F over the region bounded by the triangle. The curl of F is given by ∂Q/∂x - ∂P/∂y, where P = x + y and Q = x^2 + y^2.

To find the flux, we integrate the curl over the region R enclosed by the triangle. We can rewrite the triangle as R: 0 ≤ y ≤ x, 1 ≤ x ≤ 1. Parameterizing the region R, we have r(x, y) = (x, y) for 1 ≤ x ≤ 1 and 0 ≤ y ≤ x. The normal vector pointing outward is (-∂y/∂x, ∂x/∂x) = (-1, 1).

Evaluating the flux, we have ∬R (∂Q/∂x - ∂P/∂y) dA = ∫₁¹ ∫₀ˣ (2y - 1 - 1) dy dx = ∫₁¹ (y^2 - y)₀ˣ dx = ∫₁¹ (x^2 - x - (0 - 0)) dx = ∫₁¹ (x^2 - x) dx = [(1/3)x^3 - (1/2)x^2]₁¹ = (1/3) - (1/2) = 5/6.

Therefore, the counterclockwise circulation is 3/2, and the counterclockwise outward flux is 5/6.

To learn more about integrate click here, brainly.com/question/31744185

#SPJ11

The probability of drawing a red marble from the bowl is: 21.21%.

The probability that a green marble was chosen from the cup is 5.7%.

1st draw: Cup: 4/11 chance of Green (G1), 7/11 chance of Red (R1).

2nd draw: Bowl:

If G1, chances remain 2/3 Green (G2), 1/3 Red (R2).

If R1, chances are 2/4 Green (G2), 2/4 Red (R2).

(b) The probability of drawing a red marble from the bowl is: (4/111/3) + (7/112/4) = 4/33 + 14/44

= 0.2121 or 21.21%.

(c) Given a red marble is chosen from the bowl, the probability that a green marble was chosen from the cup is (4/11*1/3) / 0.2121 = 0.057 or 5.7%.

Read more about probability here:

https://brainly.com/question/24756209

#SPJ1

No, the events "the sum is 5" and "the first die is a 3" are not independent events.

To see why, let's consider the definition of independence. Two events A and B are said to be independent if the occurrence of one does not affect the probability of the occurrence of the other. In other words, if P(A|B) = P(A) and P(B|A) = P(B), then A and B are independent events.

In this case, let A be the event "the sum is 5" and B be the event "the first die is a 3". The probability of A is the number of ways to get a sum of 5 divided by the total number of possible outcomes, which is 4/36 or 1/9.

The probability of B is the number of ways to get a 3 on the first die divided by the total number of possible outcomes, which is 1/6.

Now let's consider the probability of both A and B occurring together. There is only one way to get a sum of 5 with the first die being a 3, which is (3,2). So the probability of both events occurring is 1/36.

To check for independence, we need to compare this probability to the product of the probabilities of A and B. The product is (1/9) * (1/6) = 1/54, which is not equal to 1/36. Therefore, we can conclude that A and B are not independent events.

Intuitively, we can see that if we know the first die is a 3, then the probability of getting a sum of 5 is higher than if we don't know the value of the first die. Therefore, the occurrence of the event B affects the probability of the event A, and they are not independent.

To know more about first die refer here :

https://brainly.com/question/30081623#

#SPJ11

The appropriate population for generalizing conclusions from the study would be all the students in the high school from which the random sample of 150 people was taken.

To generalize conclusions from a study, it is important to consider the population from which the sample was drawn. In this case, a random sample of 150 people was taken from one high school. To ensure that the conclusions are applicable to a larger group, the population that is most appropriate for generalization would be all the students in the high school from which the sample was taken.

By randomly selecting individuals from the high school, the researchers aimed to obtain a representative sample that is reflective of the larger population. Assuming the data collection methods did not introduce biases and the sample was chosen in a truly random manner, the findings and conclusions drawn from this sample can be reasonably extended to the entire population of students in that particular high school.

It is important to note that generalizing the conclusions beyond the high school population would require further investigation and data collection from a broader range of schools or populations to ensure broader applicability.

Learn more about sample here:

https://brainly.com/question/29490427

#SPJ11

The converse of p→q, "If 77 is odd, then 77 is prime," is a false statement.

The proposition p→q, in English, is "If 77 is prime, then 77 is odd." The converse of p→q is q→p, which can be expressed as "If 77 is odd, then 77 is prime."

To determine whether this converse is true or false, let's first examine the truth values of the propositions p and q:

p: "77 is prime" - This statement is false, as 77 is not prime (it has factors 1, 7, 11, and 77).

q: "77 is odd" - This statement is true, as 77 is not divisible by 2.

Now, let's evaluate the truth value of the converse q→p:

q→p: "If 77 is odd, then 77 is prime" - Since the premise (q) is true and the conclusion (p) is false, the overall statement q→p is false. A conditional statement is only true when the premise being true leads to the conclusion being true. In this case, the fact that 77 is odd does not imply that it is prime.

To know more about conditional statement, refer to the link below:

https://brainly.com/question/10714086#

#SPJ11

Quotient q(x), is 2x, and the remainder, r(x), is -x + 1

To find the quotient, q(x), and remainder, r(x), when dividing a(x) by b(x), we can use long division or synthetic division.

Using long division, we would start by dividing the highest degree term of a(x) by the highest degree term of b(x), which gives us x. We would then multiply b(x) by x to get

[tex]x³ + x[/tex]

and subtract this from a(x) to get

[tex]x² + x[/tex]

We repeat this process, dividing the highest degree term of

[tex]x² + x[/tex] by the highest degree term of b(x), which gives us x. We would then multiply b(x) by x to get

[tex]x² + 1[/tex]

and subtract this from

[tex]x² + x[/tex]

to get -x + 1. Since the degree of -x + 1 is less than the degree of b(x), this is our remainder, r(x).

The quotient, q(x), is the sum of the terms we divided by, which are x and x, so q(x) = 2x. The division of a(x) by b(x) is: a(x)/b(x) = 2x + (-x + 1)/b(x)

We found that the quotient, q(x), is 2x, and the remainder, r(x), is -x + 1, when dividing a(x) by b(x) using long division. This means that a(x) can be expressed as the product of b(x) and q(x), plus the remainder r(x).

Learn more about Quotient here:

https://brainly.com/question/16134410

#SPJ1

To generate three integers with a range of 10 and a mean of 13, we can choose the numbers 11, 12, and 14.

The mean of a set of numbers is calculated by summing all the numbers in the set and dividing the total by the count of numbers. In this case, the mean is given as 13. To find the range, we subtract the smallest number from the largest number in the set. Here, we want the range to be 10.

To satisfy these conditions, we can start with the mean, which is 13. We can then choose two integers on either side of 13 that have a difference of 10. One possibility is to choose 11 and 15, as their difference is indeed 10. However, since we need the numbers to be under 25, we need to choose a smaller number on the upper side. Hence, we can select 14 instead of 15. Therefore, the three integers that meet the criteria are 11, 12, and 14. These numbers have a mean of 13, and their range is 10.

Learn more about range here:

https://brainly.com/question/29204101

#SPJ11

Measure of arc CFD is,

⇒ m arc CFD = 294 degree

We have to given that,

In a circle,

m arc BF = 144 Degree

m arc ED = 78 degree

Now, We get by definition of linear pair, we get;

⇒ m arc CB + m arc BF = 180°

⇒ m arc CB + 144 = 180

⇒ m arc CB = 180 - 144

⇒ m arc CB = 36 degree

Hence, By vertically opposite angle, we get;

⇒ m arc CB = m arc EF

⇒ m arc EF = 36 degree

So, We get;

Measure of arc CFD is,

⇒ m arc CFD = 36 + 144 + 36 + 78

⇒ m arc CFD = 294 degree

Therefore, Measure of arc CFD is,

⇒ m arc CFD = 294 degree

Learn more about the angle visit:;

https://brainly.com/question/25716982

#SPJ1

Answer :

a)

By cross multiplication

[tex] \dfrac{3x + 4}{2} = 9.5 \\ \\ 3x + 4 = 9.5 \times 2 \\ \\ 3x + 4 = 19 \\ \\ 3x = 19 - 4 \\ \\ 3x = 15 \\ \\ x = \dfrac{15}{3} \\ \\ { \underline{x = 5}}[/tex]

b)

[tex] \dfrac{7 + 2x }{3} = 5 \\ \\ 7 + 2x = 5 \times 3 \\ \\ 7 + 2x = 15 \\ \\ 2x = 15 - 7 \\ \\ 2x = 8 \\ \\ x = \dfrac{8}{2} \\ \\ { \underline{x = 4}}[/tex]

Plan A lasts for 2 hours, and Plan B lasts for 1 hour.

Let's assume that Plan A lasts for "a" hours and Plan B lasts for "b" hours.

On Friday, there were 5 clients who did Plan A, so the total time spent on Plan A workouts is 5a hours. Similarly, for Plan B, with 6 clients, the total time spent on Plan B workouts is 6b hours. We know that the total training time on Friday was 12 hours, so we can create the equation:

5a + 6b = 12 (Equation 1)

On Saturday, there were 3 clients who did Plan A, so the total time spent on Plan A workouts is 3a hours. For Plan B, with 2 clients, the total time spent on Plan B workouts is 2b hours. The total training time on Saturday was 6 hours, so we can create the equation:

3a + 2b = 6 (Equation 2)

We now have a system of equations (Equation 1 and Equation 2) that we can solve to find the values of "a" and "b." Solving this system of equations yields the following results:

a = 2

b = 1

for more such questions on equation

https://brainly.com/question/22688504

#SPJ8

The coefficient of p²s¹⁰ in binomial expansion of (2p-s)¹² is 66.

The binomial theorem states that for any binomial expression

(a + b)ⁿ,

the term with the general form

[tex]a^{n - k} * b^k * C(n, k)[/tex]

where C(n, k) represents the binomial coefficient,

gives the coefficient of that term.

We are given (2p - s)¹².

We need the term with:

p² and

s¹⁰

Therefore, we need to find the coefficient of the term:

[tex]a^{12 - k} * b^k * C(12, k)[/tex]

in the expansion.

Given:

a = 2p,

b = -s, and

n = 12.

We want to find the value of k that corresponds to p²s¹⁰.

The power of p in the term is (12 - k), and the power of s is k. So, we set up the equation:

12 - k = 2  (for the power of p)

k = 10   (for the power of s)

To find the coefficient, we can substitute these values into the binomial coefficient formula:

C(12, 10) = [tex]\frac{12!}{10! * (12 - 10)!}[/tex]

= [tex]\frac{12!}{10! 2!}[/tex]

Now, we can calculate the coefficient:

C(12, 10) = [tex]\frac{12 * 11 * 10!}{10! * 2}[/tex]

         = 66

Therefore, the coefficient of p²s¹⁰ in the binomial expansion of (2p - s)¹² is 66.

Learn more about Binomial Expansion here:

https://brainly.com/question/27990460

#SPJ1

We have to find the length of MK to the nearest tenth of a foot given that ΔKLM is a right triangle with the measure of ∠M=90°, the measure of ∠K=70°, and LM = 9.4 feet., the length of MK to the nearest tenth of a foot is 25.8 feet.

To find MK, we can use the trigonometric ratio of tangent.

Using the tangent ratio of the angle of the right triangle, we can find the value of MK. We know that:

\[tex][\tan 70° = \frac{MK}{LM}\][/tex]

On substituting the known values in the equation, we get:

\[tex][\tan 70°= \frac{MK}{9.4}\][/tex]

On solving for MK:[tex]\[MK= 9.4 \tan 70°\][/tex]

We know that the value of tan 70° is 2.747477,

so we can substitute this value in the above equation to get the value of

MK.

[tex]\[MK= 9.4 \cdot 2.747477\]\\\[MK=25.8072\][/tex]

Therefore, the length of MK to the nearest tenth of a foot is 25.8 feet.

To know more about length visit:

https://brainly.com/question/32060888

#SPJ11

Finally, using the initial conditions y(0) = 8 and y'(0) = 6, we can solve for the constants A and B to get

y(t) = (8/3)*cos((3/2)*sqrt(2)*t) + (16/3)*sin((3/2)*sqrt(2)*t).

To find y as a function of t, we first need to solve the differential equation 8y" + 27y = 0. We can do this by assuming a solution of the form y(t) = A*cos(wt) + B*sin(wt),

where A and B are constants and w is the angular frequency. We can then differentiate y(t) twice to find y'(t) and y''(t), and substitute these into the differential equation to get the equation 8(-w^2*A*cos(wt) - w^2*B*sin(wt)) + 27(A*cos(wt) + B*sin(wt)) = 0.

Simplifying this equation gives us the equation

(-8w^2 + 27)*A*cos(wt) + (-8w^2 + 27)*B*sin(wt) = 0.

Since this equation must hold for all t, we must have (-8w^2 + 27)*A = 0 and (-8w^2 + 27)*B = 0.

Solving for w gives us w = (3/2)*sqrt(2) and

w = -(3/2)*sqrt(2).

Plugging these values into our solution for y(t) gives us

y(t) = (8/3)*cos((3/2)*sqrt(2)*t) + (16/3)*sin((3/2)*sqrt(2)*t).

To learn more about : constants

https://brainly.com/question/28872453

#SPJ11

Answer:270,000

Step-by-step explanation:

Given: $f(x) = a + b$ and $g(x) = f^{-1}(x)$ for all $x$Thus, $g$ is the inverse of the function $f$.We need to find all possible values of $a$ and $b$ such that $f(x) - g(x) = 2022$ for all $x$.

Now, $f(g(x)) = x$ and $g(f(x)) = x$ (as $g$ is the inverse of $f$) Therefore, $f(g(x)) - g(f(x)) = 0$$\ Right arrow f(f^{-1}(x)) - g(x) = 0$$\Right arrow a + b - g(x) = 0$This means $g(x) = a + b$ for all $x$.So, $f(x) - g(x) = f(x) - a - b = 2022$$\Right arrow f(x) = a + b + 2022$Since $f(x) = a + b$, we get $a + b = a + b + 2022$$\Right arrow b = 2022$Therefore, $f(x) = a + 2022$.

Now, $g(x) = f^{-1}(x)$ implies $f(g(x)) = x$$\Right arrow f(f^{-1}(x)) = x$$\Right arrow a + 2022 = x$. Thus, all possible values of $a$ are $a = x - 2022$.Therefore, the possible values of $a$ are all real numbers and $b = 2022$.

For more such questions on values

https://brainly.com/question/26352252

#SPJ8

Answer:

Step-by-step explanation:

its 9 and 5

We can see here that the volume of the solid is = 3 861cm³

Volume is the amount of space that an object occupies. It is measured in cubic units, such as cubic centimeters, cubic meters, or cubic feet. The volume of an object can be calculated by multiplying its length, width, and height.

In order to find the volume of the solid, we can find the volumes of the trapezoid and cuboid separately and then add them up.

Thus, volume of trapezoid

= 1/2 (a + b) × h × l

where:

a = 6cm

b = 17cm

h = 22 - 8 = 14cm

l = 13 cm

V = 1/2 (6 + 17) × 14 × 13 = 2 093cm³

Volume of cuboid will be:

=  l × b × h

Where

l = 17cm

b = 13cm

h = 8cm

17 × 13 × 8 = 1 768cm³

Thus, volume of solid = Volume of trapezoid + Volume of cuboid

V = 2 093cm³ + 1 768cm³ = 3 861cm³.

Learn more about volume on https://brainly.com/question/27710307

#SPJ1