(1) Thevelocity of a plantier is given by V(t) = 20t² - 100€ + 5got a, when will the accteration of a particle is zero by what the velocity of the Particles when its acceleration is zero​

D. 15,000 Hz is the frequecy which lies in the audible range i.e. the range at which the sound is audible.

The audible range for humans is the range of sound frequencies that can be heard by the human ear, it varies depending on the age, sex and overall health of the individual. Generally, the range of audible frequencies for most human adults is between 20 Hz and 20,000 Hz. Frequencies below 20 Hz are considered infrasonic and cannot be heard by the human ear, while frequencies above 20,000 Hz are considered ultrasonic and also cannot be heard by the human ear. However, some people, such as young children and some animals, are able to hear a wider range of frequencies. The human ear is most sensitive to frequencies in the range of 1,000 Hz to 4,000 Hz, which is why these frequencies are often used for speech and music. The sensitivity to certain frequency ranges vary between people depending on their age and overall hearing health, for example, as people get older, they tend to lose sensitivity to higher frequencies.

To know more about  audible frequencies  click below:

https://brainly.com/question/3446290#

#SPJ4

So, the magnitude of the crisis appointments to the nearest whole number is 220 km.

Hi! Here I will help you to discuss the displacement of a movement. Unlike distance which is a scalar quantity, displacement is a vector quantity. Then, we can define the distance as the shortest distance from two points of two or more movements. In this case, the car's motion is from east to north. Remember that the angle formed between east and north is mutually perpendicular (90°). So, we can calculate the magnitude of the displacement that occurs in two mutually perpendicular movements with this equation:

[tex] \boxed{\sf{\bold{s = \sqrt{(x_1)^2 + (x_2)^2}}}} [/tex]

With the following condition:

[tex] \sf{s = \sqrt{(x_1)^2 + (x_2)^2}} [/tex]

[tex] \sf{s = \sqrt{(245)^2 + (45)^2}} [/tex]

[tex] \sf{s = \sqrt{46,225 + 2,025}} [/tex]

[tex] \sf{s = \sqrt{48.250}} [/tex]

[tex] \sf{\bold{s \approx 219,66 \: km}} [/tex]

So, the magnitude of the crisis appointments to the nearest whole number is 220 km.

The value of resistance for given current and potential difference is 78.6 ohm.

The obstruction to current flow in an electrical circuit is measured by resistance. The Greek letter omega () represents the unit of measurement for resistance, known as ohms.

The ratio of the electric current flowing through it to the voltage applied is the definition of electrical resistance for a circuit component or device: Ohm's law, I = V/R, can be used to anticipate the behavior of the material if the resistance remains constant over a wide range of voltage.

V = 110

VI = 1.4 A

The voltage in this case is V, while the current is I.

Write the voltage expression based on Ohm's law, then rearrange the terms to arrive at the resistance expression, R. The value of R can then be calculated by substituting the necessary numbers.

V = I R

R = V / I

R = 110 / 1.40

R = 78.6 ohm

Here, 78.6 ohm is the measured value of resistance. As a result, choice B is accurate.

To learn more about Resistance from given link

https://brainly.com/question/25997303

#SPJ4

According to the views shown B and D are the correct orientation of the needle for the noted current direction.

Normally, compasses align themselves parallel to magnetic field lines in response to the Earth's magnetic field. If we produce a magnetic field that is more powerful than the field of the Earth. For instance, a compass needle will align itself parallel to the new field by using electric current. Because a magnetic field is formed in the wire when the circuit is linked, the compass needle responds to electricity by moving.

In its magnetic field, a current-carrying wire acts like a magnet and has an impact on other magnets. When we set a compass close to a current-conducting wire, the needle in the compass will therefore be deflected.

Learn more about compass here:

brainly.com/question/28174891

#SPJ4

The total charge on rectangular box is  5579.2 ×  10 ⁻¹³ C.

Although an electric field cannot flow by itself, electric flux in electromagnetism is a measure of the electric field passing through a certain surface. Any place in space where there is an electric charge will be affected by the electric field E. The gradient of the potential is the electric field. The distribution of the electric field or the velocity at which the electric field moves through a specific area can both be measured as electric flux. The Greek letter e is used to represent electric flow. Electric flux is measured in SI units as or Nm 2 C – 1.

Total charge = Φ.ε₀

Total flux = 634 N · m2/C .

Total charge = 634 N · m2/C .  8.8 × 10 ⁻¹³

Total charge = 5579.2 ×  10 ⁻¹³ C

To learn more about electric charge and electric flux from given link

https://brainly.com/question/28062884

#SPJ4

When the speed of electrons striking the anode increases, then the frequency of the emitted X rays increases.

Electrons lose their kinetic energy when they reach the anode surface because they slow down dramatically. Heat or x-rays are created from kinetic energy. Individual atoms of the anode material engage in interactions with the electrons.

As electrons are accelerated from cathode towards the anode, more number of X rays are emitted. As the speed of the electrons increases,  thermionic emission increases resulting in more heat and number of X rays being released. frequency of the emitted x-rays increases?

Greater is the number of electrons striking the anode, then larger is the number of X−ray photons emitted.

To know more about electrons, refer

https://brainly.com/question/29136290

#SPJ1

Since the magnitude of the second velocity is bigger than the first, the size will be greater is the difference

Velocity can be defined as the distance covered by a body in a specific direction. Velocity is a vector quantity.

Given that Stacey is riding in a train moving at 100 km/hr. After ten minutes, she is moving at a rate of 120 km/hr.

In the two instances, we are only given the magnitude of the velocity and not the direction. We can make an assumption that they are in the same direction

The statement that best describes the difference between her initial velocity vector and her velocity vector after ten minutes is;

the size will be greater

Because the size of the second magnitude of the velocity is bigger than the size of the first the magnitude of the second velocity.

Therefore, the statement that best describes the difference between her initial velocity vector and her velocity vector after ten minutes is "the size will be greater"

Learn more about Velocity here: https://brainly.com/question/24445340

#SPJ1

8 ohms is  the resistance of the oven heater element

What is resistance ?

Resistance is measured in ohms and represented by the Greek letter omega (Ω). Ohm is named after German physicist Georg Simon Ohm (1784-1854), who studied the relationship between voltage, current and resistance. He has been credited with formulating Ohm's law.

All substances resist the flow of electricity to some degree. They fall into one of two broad categories:

conductor: A material that offers very little resistance through which electrons can easily move. example:

silver, copper, gold, aluminium.

Insulator:

A substance that has a high resistance and restricts the flow of electrons. example:

Rubber, paper, glass, wood, plastic.

R= V^2/P = 120*120/1800 = 8 ohms

To learn more about resistance ,click the given link;

brainly.com/question/17563681

#SPJ4

It is true that if a magnet allowed to stand freely , like a compass needle, will point towards north in response to earth's magnetic field unless it's near a strong magnet.

One end of any bar magnet will always point north if it is freely suspended. This is called north-seeking pole of magnet, or simply north pole and the opposite end is called south pole.

All the metals found on Earth (natural & man-made) are magnetic. Earth has huge magnetic field that extends from North & South Poles out into the space.

To know more about magnets, refer

https://brainly.com/question/14997726

#SPJ1

√2 times is the compression of the spring if the mass of the block is halved and its speed is doubled.

What is mass?

Mass is a unit used in physics to describe inertia, a fundamental property of all matter. It essentially refers to the resistance a mass of matter provides to a change in its speed or location brought on by the application of a force. The amount of the body's mass determines how much of a change an applied force produces.

What is speed ?

A shift in an object's location, either in direction or speed. How fast something is travelling is determined by how far it has travelled in relation to how long it took. Speed is considered a scalar quantity because it only has a direction and no magnitude.

let the compression in the spring be x

kE of block becomes PE of spring

1/2 * mv^2 = 1/2 * kx^2

x = v√(m/k)

So, if mass is halved and speed is doubled, compression becomes 2*√1/2 = √2 times

Therefore, √2 times is the compression of the spring if the mass of the block is halved and its speed is doubled.

Learn more about mass from the given link.

https://brainly.com/question/86444

#SPJ4

The light beams that are released through the light source and cross invert the picture that is created by the ocular lenses.

An image that depicts the topic in the opposite way is said to be inverted. In the concave mirrors, the genuine images are reversed. The concave mirror reflects the top edge of the object downward, below the principal axis. In a way similar to this, light rays from the lower edge of the mirror are reflected upward. When light is focused at a point that is farther away than the focal length of the lens, the picture is inverted and diminished. Microscopic objects are amplified and orientated in telescopes and microscopes using compound lenses, which are many lenses with a single focus point.

Learn more about lens at

https://brainly.com/question/24862442?referrer=searchResults

#SPJ4

When s=20km the percentage of vmax reached is 83.33%.

As per the data given in the above question are as bellow,

The data share are as bellow,

The value of s is equal to 20km.

We have to determine the percentage of vmax reached.

We have to use the formula of rate of energy catayzed reaction.

A appropriate catalyst can be added to a reaction to accelerate its pace. A catalyst is a material that speeds up a chemical process without being consumed (remains chemically unchanged at the end). It offers a different, lower-activation-energy reaction route.

Rate of energy calculate reaction is equal to vmax upon km plus s

V=(vmax[s])/(KM+[s])

V=[tex]\frac{vmax\:5Km}{Km+5km}[/tex]

V=[tex]\frac{5vmax\:Km}{6km}[/tex]

Cancelling Km we get,

V=[tex]\frac{5}{6} vmax[/tex]

Percentage of Vmax reached [tex]\frac{\frac{5}{6}vmax }{vmax} \times 100[/tex]

83.33%

For such  more question on vmax.

https://brainly.com/question/16108691

#SPJ4

Answer:

Qb = 2 Qa         magnitude of charge on B is twice that of A

F = K Qa * Qb / R^2   both charges experience the same force

Ea = K Qa / s^2       field strength of A at distance S

Eb = K Qb / s^2       field strength of B at distance S

The electric field strength of B  is twice that of A

That means that charge on A is 1/2 that on B for the forces on each to be the same:

Fa = Qa * Eb

Fb = Qb * Ea

The Q value for the reaction 9be + α → 12c + n is 4.68 Mev. The amount of energy absorbed or released during a nuclear reaction is known as the Q value for that reaction.

It is a measurement parameter by which we can describe it is exothermic or endothermic. If Q value is -ve then endothermic if +ve then exothermic

[tex]Q_{value}=(m_{r}- m_{p})931 .5~MeV[/tex]

where  

[tex]m_{p} = sum ~of ~masses~ of~ products\\\\m_{r}= sum ~of~ masses~ of ~reactants[/tex]  

Mass of reactants = Mass of Be + Mass of He

                                =9.0121+4.0015

                               = 13.0136 u

Mass of products = Mass of C + Mass of H  

                               =  12+1.0086

                                =13.0086 u

   Q={(13.0136)-(13.0086)(931.5}  

  Q=4.68 MeV

Learn more about Q value of nuclear reaction here:

https://brainly.com/question/3886640

#SPJ4

No single material is best for all three categories. Each application may require a different dielectric material depending on performance requirements.

What is  Dielectric material ?

A dielectric material is a non-conductive material that is used to provide electrical insulation between two conductors. It is also used to store electrical energy in the form of an electric field. Common dielectrics include plastic, glass, rubber, and oil. Dielectric materials are also used in capacitors, which are devices that store electrical energy in the form of an electric field. The dielectric material between the capacitor plates controls the electric field strength, allowing the capacitor to store more energy. Dielectric materials also have high dielectric constants, which allow them to store more energy in a given volume

What does Capacitors means?

Capacitors are electronic components that store electric charge. They have two terminals and act as a short-term energy storage device. They are used in a wide variety of applications such as filtering, energy storage, timing, and signal processing. In a circuit, capacitors are connected in series or parallel to increase the capacitance. This increases the ability of the capacitor to store electrical energy. When a voltage is applied to the capacitor, it accumulates electric charge. This charge can then be released when needed.

Therefore the correct option is 6. No single material is best for all three categories

To know more about Dielectric material,

https://brainly.in/question/2681730

#SPJ4

When studying the properties of light, for example, reaction time would not matter much. Light moves at such a fast rate that reaction time has no effect on the results of experiments measuring the speed of light, the reflection of light, or any other property related to light.

What is reflection?

Reflection is when a wave, such as a light wave or sound wave, bounces off a surface and returns to the source. This happens when the wave encounters an obstacle such as a wall or other barrier, and the wave is redirected back towards the source. Reflection is one of the fundamental principles of physics, and is used to explain many phenomena such as the fact that light is reflected off of a mirror. Reflection is also used to help explain phenomena such as sound reverberation and the formation of shadows.

What is sound reverberation ?

Sound reverberation is the effect created when a sound is reflected off of surfaces in a room or area. This effect is created when the sound bounces off of walls, ceilings, and other objects, and then is heard again by the listener. This creates an echo-like effect, and can be used to create a more acoustically ‘live’ sound.

Therefore, One example of where reaction time wouldn't matter very much for the results is when studying the properties of light.

To learn more about Reflection,

https://brainly.com/question/29139385

#SPJ1

The ball will be 0.16 meters short of clearing the goal post.

To learn more about horizontal motion refer:

brainly.com/question/29299147

#SPJ1

V = 336.46  m/sec is the speed of the bullet .

What is displacement ?

Displacement in mechanics. The distance a particle or object travels in a particular direction. Particles and bodies are usually treated as point masses. That is, without loss of generality, an object can be treated as if all its mass were concentrated at one mathematical point. In the figure, A is the start position of the point, B is the end position, and the straight line from A to B is the displacement. The distance a point moves depends on the path it follows. Equals the amount of displacement only if the path is straight. In mechanics, it is often necessary to distinguish between the distance a point moves (or the distance a force acts) and the displacement of a point or force. Displacement is a vector quantity because it has both magnitude and direction.

Let speed of bullet be "V". Then we have:

{Speed Of Bullet}  =  V

{Time For Bullet To Travel

Distance "d" Between Rotating Disks} =  T  =

         = d/V

         = (0.850 m)/V

        =  (0.850)/V     (<---Eqn #1)

{Disk Rotational Speed}  =  ω  =  95.0 rad/sec

{Angular Displacement Between Bullet Holes} =  θ =  0.240 rad

{Time Between Successive Disk Bullet Holes}  =  T =

        =  θ/ω

        =  (0.240)/(95.0)

         = 0.002526315 sec     (<--- Eqn#2)

We now equate Eqn #1 & #2, and solve for "V":

    (0.850)/V  =  0.002526315

    ---->    V =  (0.850)/(0.002526315)

    ---->    {Bullet Velocity} =  V = 336.46  m/sec

To learn more about displacement ,click the given link;

https://brainly.com/question/14422259

#SPJ4

According to the given statement the binding energy (in MeV) for lithium 8.48 MeV.

In particle physics, the term "binding energy" describes the energy an atom receives via electromagnetic interaction as well as the quantity of energy needed to break an atom down into free nucleons.

Using the following formula, the binding energy of 3Li9 (atomic mass = 9.026789 u) may be determined:

B.E. = (Z * m_p + (A - Z) * m_n - m_Li) * c²

where:

Z = number of protons (atomic number) = 3

m_p = mass of proton (1.6726219 × 10⁻²⁷ kg)

m_n = mass of neutron (1.6749286 × 10⁻²⁷ kg)

m_Li = mass of lithium-9 atom (9.026789 × 10⁻²⁷ kg)

c = speed of light (2.998 × 10⁸ m/s)

Plugging in the known values, we get:

B.E. = (3 * 1.6726219 × 10⁻²⁷ kg + (9 - 3) * 1.6749286 × 10⁻²⁷ kg - 9.026789 × 10⁻²⁷ kg) * (2.998 × 10^8 m/s)²

This equals roughly 8.48 MeV.

To know more about binding energy visit:

https://brainly.com/question/30073915

#SPJ4

With the diagram and the data the magnitude of A +B is  13.2 cm.

What is Magnatitude?

Magnatitude is a measure of the strength of a magnetic field. It is typically expressed in units of tesla (T), which is equivalent to one newton per ampere-meter (N/A-m).Magnatitude is a useful tool for measuring the intensity of magnetic fields in various applications, such as in medical imaging, geophysics, and astrophysics. It can also be used to measure the strength of a permanent magnet.

What is Astrophysics?

Astrophysics is a branch of astronomy that deals with the physical and chemical properties of celestial objects, including stars, planets, galaxies, and the interstellar medium. It also focuses on the study of the origin and evolution of these objects, as well as their interactions with each other and with the surrounding environment. Astrophysics is a multidisciplinary field that draws on the principles and methods of physics, mathematics, and chemistry.

To know more about Magnetic fields,

https://brainly.com/question/1691855

#SPJ4

Force = 50N

Weight = Mass × Gravity = 25

Mass = 25 ÷ 10 = 2.5Kg

Time = 5 Seconds

we know

Force = mass × acceleration

50 = 2.5 × Velocity ÷ Time

50÷2.5 = Velocity ÷ 5

Velocity = 250 ÷ 2.5

Velocity = 100m/s.

Answer:

100m/s

Explanation:

force(f) = 50N

weight = 25N

weight = mass × gravity

25 = m × 10

25 = 10m

m = 25/10

m = 2.5kg

time(t) = 5sec

impulse formula

ft = m(∆v)

by substituting

50 × 5 = 2.5∆v

250 = 2.5∆v

∆v = 250/2.5

∆v = 100m/s

i hope this helped

Answer:

Explanation:

We can use the work-energy principle to solve this problem. The work-energy principle states that the work done on an object is equal to the change in kinetic energy of the object.

We can begin by finding the spring constant (k) of the spring. The spring constant is the force required to compress a spring by a certain distance. We can use the information given to us in the problem to find the spring constant:

k = F / x = 334 N / 0.024 m = 13,916.67 N/m

Now we can use the spring constant, the compression distance (3.5 cm) and the mass of the block (1.15 kg) to find the work done on the block as it compresses the spring:

work = 1/2 * k * x^2 = 1/2 * 13,916.67 N/m * (0.035 m)^2 = 97.4 J

Since the block is released from rest, its initial kinetic energy is zero. So, the work done on the block as it compresses the spring is equal to its final kinetic energy.

We know that the block slides down on a frictionless incline, so we need to consider the work done by gravity on the block during its motion. The work done by gravity is given by the equation:

work = force * distance * cos(theta)

where force is the force of gravity acting on the block, distance is the distance the block slides down the incline and theta is the angle of the incline with the ground.

force = m * g , where m = 1.15 kg and g = 9.8 m/s^2

distance = s

theta = 35°

substituting the values

work = (1.15 kg * 9.8 m/s^2) * s * cos(35°)

Now we can add the work done by gravity to the work done by the spring to find the total work done on the block.

work = 97.4 J + (1.15 kg * 9.8 m/s^2) * s * cos(35°) = 97.4 J + (11.37 N) * s * cos(35°)

Now we can solve for s, the distance the block travelled.

s = (97.4 J) / (11.37 N * cos(35°))

The final answer will be in meters.

For the motion of a satellite around a planet: V = square (GM) / R), where G is gravity constant, M is the mass of the planet, and R is the radius of the orbit.

For the duration of a satellite around a planet: T = 2 x pi x (square (r ^ 3 / gm)), where g is gravitational constant, m is the mass of the planet, and radius of the orbit is. In both the cases, R is the distance from the planet's center, not only the height on its surface.

Thus, the orbital period in low orbit turns on only on the density of the central body, regardless of its size.

Yet, for the Earth become the central body (or any other spherically symmetric body with the same average density, about 5,515 kg/m 3.

To know more about Satellite.

https://brainly.com/question/9266911

#SPJ4

This force exerted on you by the earth is also your weight, option B.

The gravitational pull of the Earth on a body is referred to as the body's weight. Also, weight is the gravitational force between the earth and an object. It is also equal to the product of gravity's acceleration and the object's mass.

The force you exert on the earth in free fall is equal to your weight. The third law of Newton. Forces that are equal and opposite. With your weight, the Earth pulls on you. In other words, an object's weight is determined by the pull of gravity on it.

The complete question is:

This force exerted on you by the earth is also

A. your mass

B. your weight

C. half you mass

D. half your weight

Learn more on force of earth on the body here: https://brainly.com/question/13627052

#SPJ1

The image formed is inverted. From the ray diagram, the object and image are on same side of the mirror. Thus, the imaged formed is real.

What is Inverted Image?

A section of physics called optics studies how light behaves and interacts with objects. Lenses are curved, transparent structures that are often constructed of glass and are used for focussing or dispersing light.

A convex lens is the opposite of a concave lens. Light rays converge in convex lenses as opposed to concave lenses. The convex lens converges incident rays towards its central axis because, in contrast to the concave lens, it is larger in the middle and thinner at the corners.

The edges of the convex lens are curled outward rather than inward. When the light is intensely focused beyond the focal length of the lens, the image appears smaller and inverted.

Learn more about Inverted Image from given link

https://brainly.com/question/25209785

#SPJ4

If, at a given time, the position of a subatomic particle is precisely known  its velocity cannot be precisely known.

What is a subatomic particle?

Simply put, a subatomic particle is a particle that is smaller than an atom. Protons, electrons, and neutrons are the three subatomic particles that may typically be separated from an atom.

The uncertainty principle, which was first put forth by German physicist and Nobel laureate Werner Heisenberg in 1927, states that we cannot know both the position and speed of a particle, such as a proton or electron, with absolute precision; the more precisely we can determine the particle's position, the less we know about its speed, and vice versa.

To learn more about subatomic particle use link below:

https://brainly.com/question/28999286

#SPJ4

The explanation of part A and Part B about magnetic field is given below

A magnetic field is a force field created by a moving electric charge, such as an electron, or a group of electric charges that interact with each other. Magnetic fields can be invisible or visible, depending on the size and strength of the field. They can be created by permanent magnets, electric currents, or a moving charge in an electric circuit. Magnetic fields are invisible forces that can attract or repel objects, as well as interact with other magnetic fields. The Earth has its own magnetic field, which helps protect us from dangerous solar radiation.

Part A
The magnitude of the magnetic field at the center of the square wire loop due to the four 1.60 mm wire segments at the midpoint of each side is 5.22 x 10-3 T.

Part B
The direction of this magnetic field is out of the page.

To know more about magnetic field click-
https://brainly.com/question/14411049
#SPJ4

The statement is false

The stronger the electron’s energy, the higher the primary quantum number. As a result, the electron’s energy level is determined by the primary quantum number. The form of the electron wave is determined by the azimuthal quantum number, l. The electron sublevels are also known as l values.

The energy level of an electron in an atom is represented by the primary quantum number. It is responsible for determining the size and energy of an atomic orbital. The greater the value of the primary quantum number, the larger the size of the atomic orbital and the higher the energy level. When the value of the primary quantum number rises, the difference in energy falls.

To learn more about quantum number to refer:

https://brainly.com/question/16977590

#SPJ1