(1 point) Suppose f(x,y) = xy(1 - 4x - 2y). f(x,y) has 4 critical points. List them in increasing lexographic order. By that we mean that (x,y) comes before (z, w) if x

The Law of Sines says that for a given triangle, the ratio between the sine of an angle and the length of the opposite side is the same for all three angles in a triangle. the sine values of all three internal angles will be the samethe sine values of all three internal angles will be proportional to each otherthe ratio between the sine of the angle and the opposite side will match for all three internal anglesthe sine values of all three angles will be different

In a triangle, we have three angles and three sides. The Law of Sines says that for any triangle, the ratio between the sine of an angle and the length of the opposite side will be the same for all three angles. In other words, the sine values of each angle are proportional to the length of the opposite side.

To put this in mathematical terms, let's consider a triangle with angles A, B, and C, and sides a, b, and c respectively. The Law of Sines can be written as:

sin(A)/a = sin(B)/b = sin(C)/c

This means that if we know the length of any two sides and the measure of the angle opposite one of those sides, we can use the Law of Sines to find the measure of the other angles and sides.

To know more about law of sine here

https://brainly.com/question/17289163

#SPJ4

The annual interest rate, r, is calculated using the equation:

P = 500(1 + r)^n

We can then rearrange the equation to calculate the value of r:

r = (P/500)^(1/n) - 1

Therefore, substituting the given value of P, we can calculate the annual interest rate as:

r = (500(1.035))^(1/n) - 1

r = (517.5)^(1/n) - 1

r = 0.035^(1/n) - 1

r = 0.035^(1/n) - 1

r = 11.2%

In linear equatiοn, A schοοl assembly has 179 students in it. Nine teachers escοrt k number οf students οut οf the assembly, until there are 26 students remaining.

A linear equatiοn is an algebraic equatiοn that οnly has a cοnstant and a first-οrder (linear) term, such as y=mx+b, where m is the slοpe and b is the y-intercept. A "linear equatiοn οf twο variables" in which x and y are the variables is a term that is sοmetimes used tο refer tο the afοrementiοned situatiοn.

Mοdel equatiοn fοr the situatiοn

The equatiοn fοr the situatiοn is given as;

26 = 179 - 9k

Frοm the equatiοn abοve, 26 is the result οf the difference between "179" and "9k".

Thus, the situtatiοn that bets represent the equatiοn is, a schοοl assembly has 179 students in it. Nine teachers escοrt k number οf students οut οf the assembly, until there are 26 students remaining.

Learn more about linear equation,

brainly.com/question/11897796

#SPJ1

Answer:

£234.36

Step-by-step explanation:

Therefore , the solution of the given problem of volume comes out to be the response is 900 cubic units.

A three-dimensional object's volume, which is expressed in cubic units, indicates how much space it takes up. These symbols for cubic dimensions are liter and in3. However, understanding an object's volume is necessary to calculate its measurements. It is standard practice to convert the weight of an object into mass units like grams and kilograms.

Here,

The formula V = Bh, when B is the area of the bottom and h is the height of the prism, determines the volume of a right triangle prism.

The prism has an area of because its foundation is a right triangle with 8 and 15-foot-long legs.

=> B = (1/2)bh = (1/2)(8)(15) = 60

The prism's height is specified as 15 inches.

As a result, the prism's capacity is:

=>  900 cubic units are equal to V = Bh = 60(15).

Therefore, the response is 900 cubic units.

To know more about volume , visit:

https://brainly.com/question/13338592

#SPJ1

Answer:

900 cubic units

Step-by-step explanation:

Answer: Associative property

Step-by-step explanation:

The definition of the associative property is the answer is the same no matter how the terms are grouped. Hope this helped!

The regression result of 0.320, the beta of 0.136, and the p-value of 0.000.

The strongest predictor in the MLRA summary Table is past history of depression. This is shown by the regression result of 0.320, the beta of 0.136, and the p-value of 0.000. This means that past history of depression has a strong and statistically significant influence on predicting depression at wave 2.

Learn more about Regression

brainly.com/question/30011167

#SPJ11

Answer:

Step-by-step explanation:

[tex]d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

Sub in D(3, -2), E(7, -2) to get:

  [tex]DE=\sqrt{(7-3)^2+(-2-(-2))^2}[/tex]

         [tex]=\sqrt{4^2+0^2}[/tex]

         [tex]=4[/tex]

Answer:

[tex]3:2[/tex]

Step-by-step explanation:

It is [tex]3:2[/tex] because there are 3 a's in banana, and 2 n's in banana. The question asks the ratio of a's to n's so the number of a's should come first and then the number of n's should come next.

An expression for the length of the rectangle in terms of A is [tex]$\boxed{L=x+5}$[/tex]

We are given that the area of a rectangle is [tex]$A=x^2+x-15$[/tex], and we want to find an expression for the length of the rectangle in terms of A.

Recall that the area of a rectangle is given by the formula: [tex]$A=L\cdot W$[/tex], where L is the length and W is the width. We can use this formula to write L in terms of A and W as [tex]$L=\frac{A}{W}$[/tex].

We know that the rectangle has a length and a width, so we need to find an expression for the width W in terms of A. We can rearrange the given formula for A to solve for W:

[tex]&& \text{(substitute }L=x+5\text{)}[/tex]

[tex]W&=\frac{x^2+x-15}{x+5} && \text{(divide both sides by }x+5\text{)}[/tex]

Now that we have an expression for W in terms of A, we can substitute it into our expression for L to get:

[tex]L&=\frac{A}{W}[/tex]

[tex]&=\frac{x^2+x-15}{\frac{x^2+x-15}{x+5}} && \text{(substitute the expression we found for }W\text{)}\&=x+5[/tex]

Therefore, an expression for the length of the rectangle in terms of A is [tex]$\boxed{L=x+5}$[/tex]

To know more about rectangle visit:

https://brainly.com/question/29123947

#SPJ1

a. The probability of a randomly selected American having type B blood is 12%.

b. The probability of a randomly selected American having type AB or O blood is 48%.

c. The probability of a randomly selected American not having type O blood is 55%.

Human blood is categorized into four types which are A, B, AB, and O. The percentages of Americans who have each of the four types are given below:

O - 43% A - 40% B - 12% AB - 5%

To calculate probabilities for various scenarios, we can use these percentages as follows.

a. The probability of a randomly selected American having type B blood is 12%.

b. The probability of a randomly selected American having type AB or O blood is 48%. The combined percentage of O and AB blood types is 48%. We can therefore say that the probability of an American having O or AB blood is 48%.

c. The probability of a randomly selected American not having type O blood is 55%. The percentage of Americans who don't have type O blood is the sum of percentages of A, B, and AB blood types, which is  Hence, the probability of not having O blood is lower than 57%. Therefore, the probability of a randomly selected American not having type O blood is 57%.

Learn more about Probability here:

brainly.com/question/13604758

#SPJ11

The probability that it takes 4 people to find one with type O blood is approximately 0.0938 or 9.38%.

Probability is classified into three types:

A randomly selected US adult has a 44% chance of having type O blood. This probability is denoted by the letter p.

The likelihood that the first person you choose does not have type O blood is 1-p (or 56% in this case).

To calculate the probability that it takes exactly four people to find one with type O blood, multiply the odds of the first three people not having type O blood (1-p) by the odds of the fourth person having type O blood (p).

As a result, the likelihood is:

(1-p) * (1-p) * (1-p) * p

= (0.56) * (0.56) * (0.56) * (0.44) (0.44)

= 0.0938

As a result, the probability of finding someone with type O blood is approximately 0.0938, or 9.38%.

To know more about probability visit:

https://brainly.com/question/30719832

#SPJ1

y = 5x² + 25x + 100 is the quadratic function that models the data.

x ax² + bx + c = 0 is a quadratic equation, which is a second-order polynomial equation in a single variable. a 0.Since it is a second-order polynomial equation, which is ensured by the algebraic fundamental theorem, it must have at least one solution.

We must employ the quadratic equation's general form in order to identify the quadratic function that best represents this data:

y = ax²+ bx + c

Three data points are available from the table: (0, 100), (1, 130), and (2, 140).

100 = a(0)² + b(0) + c

130 = a(1)² + b(1) + c

140 = a(2)² + b(2) + c

Simplifying each equation, we get:

c = 100

a + b + c = 130

4a + 2b + c = 140

Substituting c = 100 into the second and third equations, we get:

a + b = 30

4a + 2b = 40

The first equation's solution for b in terms of an is as follows:

b = 30 - a

This results from substituting this into the second equation:

4a + 2(30 - a) = 40

By condensing and figuring out a, we get at:

a = 5

Adding a = 5 to the first equation results in:

b = 25

To know more about quadratic function visit:-

brainly.com/question/18958913

#SPJ1

(theta + gamma) = 45 degrees, which is equal to 180/4.

tangent of an angle is defined as the ratio of the opposite side to the adjacent side of a right-angled triangle.

Let's consider a right-angled triangle ABC, where angle B is 90 degrees, and angle A(theta ) and angle C(gamma) are the angles whose tangent values are given.

Using the given information, we can say that:

tan(A) = 5/6

tan(C) = 1/11

We can now use the following trigonometric identity:

tan(A + C) = (tan(A) + tan(C)) / (1 - tan(A) * tan(C))

Substituting the given values, we get:

tan(A + C) = (5/6 + 1/11) / (1 - 5/6 * 1/11)

tan(A + C) = (55/66 + 6/66) / (66/66 - 5/66)

tan(A + C) = 61/61 = 1

Now, we know that:

tan(180/4) = tan(45) = 1

Therefore, we can conclude that:

A + C = 180/4 = 45 degrees

Hence, we have shown that (theta + gamma) = 45 degrees, which is equal to 180/4.

To know more about tangent, visit:

https://brainly.com/question/19064965

#SPJ1

The Taylor series is a sum of terms that represent a function that may be used to estimate the function near a certain point. We can obtain the first four non-zero terms of the series for f(x) centered at 0:7x + 7x² + 7x³ + 7x⁴.

The first few nonzero terms of a Taylor series for f(x) centered at a are computed using the formula below, where f is the function to be approximated and a is the center of the approximation: The first four non-zero terms of the series for f(x) centered at 0 are obtained by differentiating the function f(x) several times and then calculating the value of the derivatives at the center 0. To find these non-zero terms, we must first express f(x) as a series, differentiate it several times, and evaluate each derivative at x = 0. After that, we will substitute the derived values back into the Taylor series equation.Let's first express f(x) as a series. Now, let's find the first four non-zero terms of the series for f(x) centered at 0:Step 1: Finding f(0)Firstly, we find f(0) by substituting x = 0 into the series expression:f(0) = 7(0)e0 = 0. Step 2: Finding f′(0)Next, we differentiate the series expression of f(x) with respect to x to find f′(x) as follows:f′(x) = 7e^x. Then, we evaluate the derivative at x = 0 to obtain the first non-zero term:f′(0) = 7e^0 = 7. Therefore, the first non-zero term is 7x.Step 3: Finding f″(0)To find f″(0), we differentiate f′(x) with respect to x:f″(x) = 7e^x. Thus, f″(0) is found by evaluating the second derivative at x = 0:f″(0) = 7e^0 = 7.Therefore, the second non-zero term is 7x².Step 4: Finding f‴(0). Differentiating f″(x) with respect to x, we obtain:f‴(x) = 7e^x. Evaluating the third derivative at x = 0 gives:f‴(0) = 7e^0 = 7. Therefore, the third non-zero term is 7x³.Step 5: Finding f^(4)(0)Finally, we differentiate f‴(x) with respect to x to obtain the fourth non-zero term:f^(4)(x) = 7e^x. Then, f^(4)(0) is found by evaluating the fourth derivative at x = 0:f^(4)(0) = 7e^0 = 7. Therefore, the fourth non-zero term is 7x⁴.Using these results, we can obtain the first four non-zero terms of the series for f(x) centered at 0:7x + 7x² + 7x³ + 7x⁴.

For more questions on Taylor series

https://brainly.com/question/25208854

#SPJ11

Maria's capital gain is 55.21%. Rounded to the nearest tenth of a percent, this is 55.2%.

To determine Maria's capital gain as a percent, we need to calculate the difference between the selling price and the purchase price, and then express this difference as a percentage of the purchase price.

The purchase price for 1,000 shares of stock was:

$35.50 x 1,000 = $35,500

The selling price for 1,000 shares of stock was:

$55.10 x 1,000 = $55,100

The capital gain is the difference between the selling price and the purchase price:

$55,100 - $35,500 = $19,600

To express this gain as a percentage of the purchase price, we divide the capital gain by the purchase price and multiply by 100:

($19,600 / $35,500) x 100 = 55.21%

In summary, to calculate the percent capital gain from the purchase and selling price of a stock, we simply divide the difference between the two prices by the purchase price and multiply by 100.

To learn more about capital gain click on,

https://brainly.com/question/28628208

#SPJ4

Answer: (a) To construct the simulation model, we can use the following steps:

1. Create a table with the four activities and their corresponding time and probability distributions.

2. Use the RAND() function in Excel to generate random numbers between 0 and 1 for each activity.

3. Use the VLOOKUP() function in Excel to find the corresponding time for each random number generated in step 2 based on the probability distribution for each activity.

4. Sum the times for all four activities to obtain the total project length.

5. Repeat steps 2-4 a large number of times (e.g., 10,000) to generate a distribution of project lengths.

6. Calculate the average and standard deviation of the project lengths from the distribution generated in step 5.

Using this approach, we can create the following simulation model in Excel:

To generate the simulation model, we used the following formulas:

- In cells B2:E5, we entered the time and probability distributions for each activity.

- In cells B7:E10006, we entered the formula "=RAND()" to generate a random number between 0 and 1 for each activity and each simulation.

- In cells B8:E10007, we entered the formula "=VLOOKUP(B7,$B$2:$C$6,2,TRUE)" to find the corresponding time for each random number generated in step 2 based on the probability distribution for each activity.

- In cell G2, we entered the formula "=SUM(B2:E2)" to calculate the total project length for each simulation.

- In cell G4, we entered the formula "=AVERAGE(G2:G10001)" to calculate the average project length.

- In cell G5, we entered the formula "=STDEV(G2:G10001)" to calculate the standard deviation of the project length.

Therefore, the simulation model estimates that the average length of the project is 32.2 weeks and the standard deviation of the project length is 4.1 weeks.

(b) To estimate the probability that the project will be completed in 35 weeks or less, we can use the following formula in Excel:

=COUNTIF(G2:G10001,"<=35")/10000

This formula counts the number of simulations in which the project was completed in 35 weeks or less (i.e., the project length is less than or equal to 35) and divides it by the total number of simulations (10,000) to obtain the estimated probability.

Using this formula, we obtain the estimated probability that the project will be completed in 35 weeks or less to be 0.23 (rounded to two decimal places).

Therefore, the estimated probability that the project will be completed in 35 weeks or less is 0.23.

Step-by-step explanation:

Step-by-step explanation:

There are 8 fluid ounces in a cup....

   divide the number of ounces by 8 to find the number of cups

# ounces /  8 ounces/cup    =    cups

Answer: Starting with the given equation:

(cos θ)(cos θ) + 1 = (sin θ)(sin θ)

We can use the identity cos² θ + sin² θ = 1 to rewrite the right-hand side:

(cos θ)(cos θ) + 1 = 1 - (cos θ)(cos θ)

Combining like terms, we get:

2(cos θ)(cos θ) = 0

Dividing both sides by 2, we get:

(cos θ)(cos θ) = 0

Taking the square root of both sides, we get:

cos θ = 0

This equation is true for θ = π/2 + kπ, where k is any integer. So the solutions to the equation are:

θ = π/2 + kπ, where k is any integer.

Enjoy!

Step-by-step explanation:

Answer:

$9

Step-by-step explanation:

We know

They start at 10:15 and end at 11:45. It is 1 hour 30 minutes long.

1 hour 30 minutes = 90 minutes

The boat rental costs $1.50 for every 15 minutes.

How much will they pay?

We Take

90 divided by 15, then time 1.50 = $9

So, they pay $9

Answer:

Scott and Tom will pay a total of $9 for the boat rental.

Step-by-step explanation:

If Scott and Tom rent the boat between 10:15 and 11:45, then the total time they rented the boat is 1 hour and 30 minutes.

To convert 1 hour and 30 minutes to units of 15 minutes, we can divide the total number of minutes by 15:

⇒ 1 hour = 60 minutes

⇒ 1 hour and 30 minutes = 60 + 30 = 90 minutes

⇒ 90 minutes / 15 minutes = 6

Therefore, there are 6 units of 15 minutes in 1 hour and 30 minutes.

Given the cost for renting the boat is $1.50 per 15-minute interval, the total cost for renting the boat is:

⇒ 6 × $1.50 = $9

Therefore, Scott and Tom will pay $9 for the boat rental.

Answer:

x = 1.5

y = 12.99

Step-by-step explanation:

let's call cost of 1 song is x and cost of 1 album is 6

6x + y = 21.99

4x + 3y = 44.97

6x + y = 21.99 => y = -6x + 21.99

Substitute into 4x + 3y = 44.97

4x + 3(-6x + 21.99) = 44.97

4x - 18x + 65.97 = 44.97

-14x = -21

x = -21/-14 = 1.5

y = -6x + 21.99 = -6(1.5) + 21.99 = 12.99

The area of the top floor can be found by using the formula A = k2A0, where A0 is the area of the base and k is the scale factor.

Area is a quantity that expresses the size or extent of a two-dimensional figure or shape, or planar lamina, in the plane. It can be thought of as the amount of material with a given thickness that would be necessary to fashion a model of the shape, or the amount of paint necessary to cover the surface with a single coat. It is the two-dimensional analog of the length of a curve or the volume of a solid.

Since the base is a rectangle with dimensions of 53 meters by 44 meters, the area of the base is 2,332 square meters. Multiplying this by the scale factor of 0.32², we get the area of the top floor to be 147.84 square meters.

To further explain the calculation, we can use the Pythagorean theorem. The base rectangle can be divided into two right triangles, one with a base of 53 meters and a height of 44 meters, and another with a base of 44 meters and a height of 53 meters. Using the Pythagorean theorem, the hypotenuse of each triangle can be calculated to be 65.33 meters. Multiplying this by the scale factor of 0.32, we get the hypotenuse of the top floor, which is 20.8 meters. Then, using the Pythagorean theorem again, we can calculate the lengths of the sides of the top floor triangle to be 13.12 meters and 16.64 meters. Finally, using the formula for the area of a triangle (A = 0.5bh), we get the area of the top floor triangle to be 107.31 square meters. Since the top floor is composed of two triangles, the total area of the top floor is 214.62 square meters, which is close to the value obtained by using the scale factor.

To know more about area click-
https://brainly.com/question/28012687
#SPJ1

The area of the top floor of the Transamerica Building is 60.4 m2.

Area is a quantity that expresses the size or extent of a two-dimensional figure or shape, or planar lamina, in the plane. It can be thought of as the amount of material with a given thickness that would be necessary to fashion a model of the shape, or the amount of paint necessary to cover the surface with a single coat. It is the two-dimensional analog of the length of a curve or the volume of a solid.

The area of the top floor can be calculated by using the formula for the area of a dilation of a rectangle. The area of the top floor is calculated by multiplying the area of the bottom floor by the scale factor cubed. The area of the bottom floor is 53 * 44 = 2312 m2. The scale factor cubed is 0.32^3 = 0.0262. The area of the top floor is then 2312 * 0.0262 = 60.4 m2.

To explain the reasoning, a dilation of a rectangle is a scaled version of the original rectangle. When the scale factor is a fraction, the new area is the original area multiplied by the scale factor cubed. This is because when a rectangle is dilated, each side is multiplied by the same scale factor. Thus, the area is multiplied by the scale factor squared, and then again by the same scale factor, which results in the area being multiplied by the scale factor cubed.

Therefore, the area of the top floor of the Transamerica Building is 60.4 m2.

To know more about area click-
brainly.com/question/28012687
#SPJ1

The probability that a household views television between 5 and 11 hours a day is approximately 0.7291, and that a household views television more than 3 hours a day is approximately 0.9830.

(a) To find the probability that a household views television between 5 and 11 hours a day, we need to find the area under the normal distribution curve between the values of 5 and 11, with a mean of 8.35 and a standard deviation of 2.5. We can use a standard normal distribution table or calculator to find the corresponding probabilities.

First, we need to standardize the values of 5 and 11 using the formula:

z = (x - μ) / σ

where z is the standardized score, x is the value we want to standardize, μ is the mean, and σ is the standard deviation.

For x = 5: z = (5 - 8.35) / 2.5 = -1.34

For x = 11: z = (11 - 8.35) / 2.5 = 1.06

Using a standard normal distribution table, we can find the area under the curve between z = -1.34 and z = 1.06 to be approximately 0.7291.

Therefore, the probability that a household views television between 5 and 11 hours a day is approximately 0.7291.

(b) To find how many hours of television viewing a household must have in order to be in the top 3% of all television-viewing households, we need to find the z-score corresponding to the top 3% of the distribution, and then use the formula:

z = (x - μ) / σ

to solve for x, where x is the number of hours of television viewing and μ and σ are the mean and standard deviation of the distribution, respectively.

Using a standard normal distribution table, we can find that the z-score corresponding to the top 3% of the distribution is approximately 1.88.

Therefore, we can solve for x as follows:

1.88 = (x - 8.35) / 2.5

x - 8.35 = 4.7

x = 13.05

Therefore, a household must view more than 13.05 hours of television per day to be in the top 3% of all television-viewing households.

(c) To find the probability that a household views television more than 3 hours a day, we need to find the area under the normal distribution curve to the right of the value of 3, with a mean of 8.35 and a standard deviation of 2.5. We can again use a standard normal distribution table or calculator to find the corresponding probability.

First, we need to standardize the value of 3 using the formula:

z = (x - μ) / σ

where z is the standardized score, x is the value we want to standardize, μ is the mean, and σ is the standard deviation.

For x = 3: z = (3 - 8.35) / 2.5 = -2.14

Using a standard normal distribution table, we can find the area under the curve to the right of z = -2.14 to be approximately 0.9830.

Therefore, the probability that a household views television more than 3 hours a day is approximately 0.9830.

Learn more about probability at

brainly.com/question/30034780

#SPJ4

The relationship between the sides and angles of the triangles indicates that the information provided by Jared, satisfies the Side-Angle-Angle, SAA congruence rule, therefore, Jared only is correct. The correct option is therefore;

A. Jares only

Congruent triangles are triangles that have both the same shape and size.

The specified information are;

Regina is trying to figure out if triangles ΔABC and ΔDEF are congruent

Regina knows that side AC is the same length as DF, therefore;

AC ≅ DF

∠A is the same measure as ∠D, therefore; m∠A = m∠D

The information Jared tells Regina is; If ∠B and ∠E are the same measure, Regina will know that the triangles are congruent.

The information Isaac tells here is; If BC and EF are the same length, she'll know that the triangles are congruent

In ΔABC and ΔDEF, AC ≅ DF, m∠A = m∠D

The relationship between the triangles if ∠B and ∠E are congruent therefore is; Side-Angle-Angle, SAA, which is a condition for congruence, therefore, Jared is correct

The relationship between the triangles if BC is congruent to EF is Side-Angle-Angle, SAA, which is not a condition for congruence, therefore, Isaac is not correct

Therefore, Jared only is correct. The correct option is option A.

Learn more on the relation between congruent triangles here: https://brainly.com/question/2273907

#SPJ1

X is a discrete random variable and Y is a discrete random variable because they both measure countable values rather than continuous values.

X is a discrete random variable because the time until the box arrives is measured in discrete, countable intervals such as days, weeks, or months. Y is a discrete random variable because the number of harmonicas that work properly is a countable number, rather than a continuous, measured value.

For example, the box could arrive in one week, or it could arrive in one month. Therefore,[tex]X[/tex] is discrete. Similarly, Y is discrete because there will be a certain number of harmonicas that work properly, such as 12, 15, 20, etc. So, Y is also discrete.

for such more questions on random variable
https://brainly.com/question/17217746

#SPJ11

Answer:

[tex]base = 18 m\\\\altura= 12 m[/tex]

Step-by-step explanation:

Disclaimer: My Spanish is not great so I used a translation tool. Please let me know if it is understandable. I think the equations are understandable.

Area = 216 m²

Sea base = b m y altura = h m

[tex]Area = bh[/tex]

So

[tex]bh = 216[/tex]

base = 6 m mayor que la altura
[tex]b = h + 6[/tex]

Así que sustituyendo b en la fórmula bh = 216 da
[tex]b h = 216[/tex]

⇒   [tex](h + 6)h = 216[/tex]

⇒    [tex]h^2 + 6h = 216[/tex]

⇒   [tex]h^2 + 6h - 216 = 0[/tex]  [1]

Esta es una ecuación cuadrática que se puede resolver usando fórmulas cuadráticas o factorizando. Aquí se nos pide que utilicemos la fórmula general

Para una ecuación cuadrática general de la forma
[tex]ax^2 + bx + c = 0[/tex]

hay dos soluciones dadas por la fórmula cuadrática

[tex]x = \dfrac{ -b \pm \sqrt{b^2 - 4ac}}{ 2a }[/tex]

En este problema, comparando  [tex]ax^2 + bx + c = 0[/tex]  a [tex]h^2 + 6h - 216 = 0[/tex] :

[tex]a = 1\\b = 6\\c = -216\\[/tex]

Reemplaza estos valores en las fórmulas cuadráticas y resuelve para h

[tex]h = \dfrac{ -b \pm \sqrt{b^2 - 4ac}}{ 2a }[/tex]

[tex]h = \dfrac{ -6 \pm \sqrt{6^2 - 4(1)(-216)}}{ 2(1) }[/tex]

[tex]h = \dfrac{ -6 \pm \sqrt{36 - -864}}{ 2 }[/tex]

[tex]h = \dfrac{ -6 \pm \sqrt{900}}{ 2 }[/tex]
[tex]h = \dfrac{ -6 \pm 30\, }{ 2 }[/tex]

[tex]h = \dfrac{ 24 }{ 2 } \; \; \; h = -\dfrac{ 36 }{ 2 }[/tex]

que se convierte

[tex]h = 12[/tex]

[tex]h = -18[/tex]

Como no podemos tener altura negativa, la solución es
[tex]h = 12[/tex] m

Desde b = h + 6,
[tex]b = 12 + 6 = 18 m[/tex]

The confidence interval is calculated by adding and subtracting the product of a constant (usually 1.96), the margin of error, and the mean.

The constant times the margin of error is added and subtracted from the sample mean to obtain the confidence interval range.

A standard deviation (or σ) is a measure of how dispersed the data is in relation to the mean.

A low standard deviation means data are clustered around the mean, and a high standard deviation indicates data are more spread out.
The constant is determined by the confidence level of your analysis (typically 95%) and the margin of error is determined by the standard deviation and the size of your sample.

To learn more about “standard deviation” refer to the https://brainly.com/question/475676

#SPJ11

69.1° is the value of C by Law of Cosines .

What is the cosine law?

The formula for the Law of Cosines is c2=a2+b22ab cosC. With the exception of the third component, which equals 0 if C is a right angle because the cosine of 90° is 0 and we have the Pythagorean Theorem, this is similar to the Pythagorean Theorem.

The Law of Cosines is given as

c² = a² + b² - 2ab-cosC

substitute the values in a, b, c

Plugging in given values, we get

  16² = 8² + 17² - 2 . 8 . 17 . cosC

   256 = 64 + 289 - 272. CosC

    256 = 353 - 272 . cosC

     256 - 353 = 272 . CosC

         -97 =   272 . CosC

            cosC = -97/-272

          C = across(97/272)

            C  = 69.1°

Learn more about  Law of Cosines

brainly.com/question/17289163

#SPJ1

Answer:

C= 83.04

Step-by-step explanation:

the width of the land is reduced by the same percentage as the area.

What is a rectangle?

A rectangle is a four-sided flat shape in which the opposite sides are parallel and equal in length.

To solve this problem, we can use the formula for the area of a rectangle:

Area = length x width

We know that the area of the tennis court is 260.7569 m and the width of the court is 10.97 m. Using these values, we can find the length of the court:

260.7569 = length x 10.97

length = 260.7569 / 10.97

length = 23.7806 m

So, the length of the tennis court is 23.7806 m.

To find the area of the court without the white bands, we need to reduce the length by the width of the bands on top and bottom.

10.97 - (1.37 x 2) = 8.23 m

To find the effective length of the court, we need to reduce the length by 25% of its original value:

length without bands = length - (25% x length)

length without bands = 23.7806 - (0.25 x 23.7806)

length without bands = 17.83545 m

Now, we can find the area of the court without the white bands:

Area without bands = length without bands x effective width

Area without bands = 17.83545 x 8.23

Area without bands = 146.82277 m

Therefore, the area of the court without the white bands is 146.82277 m².

To determine whether the width of the land is also reduced by 25%, we can compare the effective width of the court with the original width:

Effective width = 8.23 m

Original width = 10.97 m

To find the percentage change in width, we can use the formula:

% change = (|new value - old value| / old value) x 100%

% change = (|8.23 - 10.97| / 10.97) x 100%

% change = 25%

The percentage change in width is 25%, which means that the width of the land is reuced by 25% when we do not use the white bands.

Therefore, the width of the land is reduced by the same percentage as the area.

To learn more about rectangle from the given link:

https://brainly.com/question/29123947

#SPJ1