1. Mass of the empty Dish 167.0 g
2. Mass of the dish plus kernel before heating 169.0 g
3. Mass of the kernels before heating 2.0 g
4. Mass of the dish plus popped corn 168.8 g
5. Mass of the popped corn 1.8 g
6. Mass of the water driven 0.2 g
7. Mass percent of water in the popcorn 10%

Given that a sample of unpopped popcorn weighed 58.2 grams and after popping the popped kernels weighed 51.1 grams, calculate the percent water in the unpopped popcorn.

Answer:

answer A is the answer suii

Answer:

A

Explanation:

u put it down and let them pick it up themselves so if anything happens u are not to be blamed

When the diffracting crystal is ammonium dihydrogen phosphate, the goniometer setting needed to observe the L1 (n=1) lines for Br at = 8.126 is 2 = 2 x 32.6° = 65.2°.

A goniometer is a tool that can be used to rotate an object to a specific position or measure an angle. The former description more accurately describes orthopedics. Goniometry is the art and science of determining the joint ranges in each plane of the joint.

Using Bragg's Law, we can determine the goniometer setting for seeing the L1 (n=1) lines for Br at = 8.126:

nλ = 2d sinθ

For the Lβ1 (n=1) lines for Br at λ = 8.126Å, we have:

n = 1

λ = 8.126Å

a) d = 4.404 for ethylenediamine d-tartrate.

When we apply the values to Bragg's Law, we obtain:

1 x 8.126Å = 2 x 4.404Å x sinθ

sinθ = (1 x 8.126Å) / (2 x 4.404Å) = 0.923

θ = sin(0.923) = 68.9°

b) d = 7.549 for ammonium dihydrogen phosphate. Å

When we apply the values to Bragg's Law, we obtain:

1 x 8.126Å = 2 x 7.549Å x sinθ

sinθ = (1 x 8.126Å) / (2 x 7.549Å) = 0.539

θ = sin(0.539) = 32.6°

To know more about dihydrogen phosphate visit:-

https://brainly.com/question/30438460

#SPJ1

Under specific temperature and pressure conditions, a gas acts as an ideal gas. Particularly, the optimal conditions for the petrol' behaviour are low pressure and high temperature.

An ideal gas is a hypothetical gas made up of numerous tiny particles moving randomly all the time. Intermolecular forces, molecular size, and volume are all presumptions that apply to ideal gases. Additionally, it is presummated that they collide in completely elastic collisions in which there is no kinetic energy loss. The ideal gas law, PV=nRT, which has P as the pressure, V as the volume, n as the number of moles, R as the gas constant, and T as the temperature, can be used to describe the behaviour of an ideal gas. This law offers a helpful model for how many actual gases behave when exposed to situations like high temperatures and low pressures.

Learn more about ideal gas here:

https://brainly.com/question/28267242

#SPJ4

Heterogeneous catalysis involves a catalyst in the solid phase, meaning that the catalyst is a solid material while the reactants are either in the liquid or gas phase. A catalyst is a substance that increases the rate of a chemical reaction without being consumed in the process. It is also known as a "spark plug" because it is the agent that initiates the reaction.

The most frequently used type of catalysts in heterogeneous catalysis is those in the solid phase. Heterogeneous catalysis is a process that involves a catalyst that is in a different phase from the reactants or products. Therefore, the answer to the question above is a catalyst in the solid phase.A catalyst is a substance that increases the rate of a chemical reaction without itself being consumed in the process.

In other words, it increases the rate of a chemical reaction by reducing the activation energy needed to start the reaction. The catalytic process involves three stages: adsorption, reaction, and desorption.Heterogeneous catalystsHeterogeneous catalysts are those catalysts that are in a different phase from the reactants or products in a chemical reaction. Heterogeneous catalysis most frequently involves a catalyst in the solid phase, although it can also involve a catalyst in the liquid or gas phase.

Heterogeneous catalysis typically involves a solid catalyst that is in contact with a liquid or gas reactant. A good example of heterogeneous catalysts is when a metal oxide catalyst is used to break down nitrogen oxides in car exhaust gases.

For more such questions on catalysis

https://brainly.com/question/30542891

#SPJ11

Answer:

1) b. Caesium

2) b. Indium

Answer:

[tex]this \: is \: the \: diagram \: of \: the \: formation \: of \: \\ copper \: tetramine \: ion[/tex]

The equation that is going to show the loss of the third electron from the copper at is;

Cu(s) ----> Cu^3+ + 3e

Ionization energy is the amount of energy required to remove an electron from an atom or a positively charged ion in its gaseous state. It is also known as ionization potential or ionization enthalpy.

The ionization energy of an atom varies based on its position in the periodic table, and it generally increases from left to right across a period and decreases down a group.

Learn more about ionization energy:https://brainly.com/question/2838510

#SPJ1

bababoy jijijijajdiwhrjfofhebdlodvebfif

Answer:

but I have a great day to be a good day for a new post it on your own life to be the

The  atoms of lithium that  are in 18.7 g is 16 × 10²³ atoms . This is taken out by mole concept .

The mole is a unit of measurement similar to the pair, dozen, gross, and so on. It provides a precise count of the atoms or molecules in a bulk sample of matter. A mole is the amount of substance that contains the same number of discrete entities (atoms, molecules, ions, etc.)

if 7 grams of lithium contain 6 × 10²³ atoms

then 18.7 will contain 16 × 10²³ atoms

to know more about mole concept , visit ;

brainly.com/question/31123980

#SPJ1

2-bromopropane molecules would be most favorable to undergo an E2 reaction rather than an SN2 reaction with NaOH. Here option B is the correct answer.

An E2 reaction occurs when a strong base removes a proton from a beta-carbon adjacent to a leaving group, leading to the formation of a double bond and the departure of the leaving group. An SN2 reaction, on the other hand, involves a nucleophile attacking the carbon bearing the leaving group while the leaving group departs.

The relative favorability of E2 and SN2 reactions depends on the strength of the nucleophile and the base, the steric hindrance around the carbon bearing the leaving group, and the nature of the leaving group.

In this case, NaOH is a strong base, and the molecule that is most favorable to undergo an E2 reaction is the one with the least steric hindrance around the carbon bearing the leaving group, which is 2-bromopropane. The other molecules have more steric hindrance around the carbon bearing the leaving group, making them less favorable to undergo E2 reactions.

To learn more about bromopropane molecules

https://brainly.com/question/489491

#SPJ4

Complete question:

Which of the following molecules would be most favorable to undergo an E2 reaction rather than an SN2 reaction with NaOH?

a) 1-bromopropane

b) 2-bromopropane

c) 1-chloropropane

d) 2-chloropropane

Answer:

2.16 M

Explanation:

The molarity of the solution is 2.16 M. To calculate the molarity, you need to first determine the number of moles: 29.4 grams of NaCl is equal to 0.737 moles. Then, divide the number of moles, 0.737, by the volume of the solution, which is 250 mL. Multiplying the result by 1000 gives the molarity, which is 2.16 M.

yw

The specific gravity of the liquid is 1.125.

The specific gravity of a substance is the ratio of its density to the density of water at a particular temperature.

Therefore, we need to calculate the density of the liquid and compare it to the density of water at the same temperature.

The formula for density is:

density = mass/volume

density of the liquid = 45.0 g / 40.0 mL = 1.125 g/mL

At 4 °C, the density of water is 1.000 g/mL.

Therefore, the specific gravity of the liquid is:

specific gravity = density of liquid / density of water = 1.125 g/mL / 1.000 g/mL = 1.125

Learn more about specific gravity here: https://brainly.com/question/543765

#SPJ1

The product of the addition of the carbene to the unknown alkene X is a cyclopropane derivative, with the same stereochemistry as the alkene X.

Carbenes are molecules containing a carbon atom with two non-bonding electrons and a triple bond, and can add to alkenes to give a cyclopropane derivative. The alkene (unknown X) that reacts with the carbene to give the following product is shown in the following diagram. Note that the two sp2 carbons on either side of the double bond are stereochemically distinct, with one carbon pointed "up" and the other pointed "down".

When the carbene adds to the double bond, a three-membered ring forms. This three-membered ring adopts a chair conformation, and the alkene stereochemistry is maintained in the product.

For more such questions on stereochemistry

https://brainly.com/question/13266152

#SPJ11

Answer:

We can use the equation for the dissociation of a weak acid:

HA + H2O ⇌ H3O+ + A-

The equilibrium constant expression (Ka) is:

Ka = [H3O+][A-]/[HA]

We are given the initial concentration of the acid (0.49 M) and the concentration of the acid at equilibrium (0.36 M). We can use the concentration change to determine the concentration of H3O+ and A- at equilibrium.

Let x be the concentration of H3O+ and A- at equilibrium. Then, at equilibrium, the concentration of HA is (0.49 - x).

We know that the equilibrium concentration of HA is 0.36 M, so we can set up the following equation:

0.36 = 0.49 - x

Solving for x, we get:

x = 0.49 - 0.36 = 0.13 M

Now we can plug in the equilibrium concentrations into the Ka expression:

Ka = [H3O+][A-]/[HA] = (0.13)(0.13)/(0.36) = 0.0481

Rounding to two significant figures, Ka for this acid is 0.048.

The equilibrium constant of an acid's dissociation reaction is known as the acid dissociation constant, or Ka. The strength of an acid in a solution is numerically represented by this equilibrium constant. Here the value of Ka is 0.0481.

The difference between strong and weak acids is determined by the acid dissociation constant (Ka). As Ka rises, the acid dissociates more. Therefore, strong acids must dissociate more in water. On the other hand, a weak acid has a lower propensity to ionise and release a hydrogen ion, resulting in a less acidic solution.

Here the dissociation constant Ka = [H₃O⁺][A⁻]/[HA]

Let x be the concentration of H₃O⁺ and A⁻ at equilibrium. Then, at equilibrium, the concentration of HA is (0.49 - x). We know that the equilibrium concentration of HA is 0.36 M, so we can set up the following equation:

0.36 = 0.49 - x

Solving for x, we get:

x = 0.49 - 0.36 = 0.13 M

Now we can plug in the equilibrium concentrations into the Ka expression:

Ka = [H₃O⁺][A⁻]/[HA] = (0.13)(0.13)/(0.36) = 0.0481

To know more about dissociation constant, visit;

https://brainly.com/question/14498573

#SPJ2

In geologic strontium isotopic analysis by ICP-MS, the use of a collision cell with CH3F helps reduce isobaric interference between 87Rb+ and 87Sr+.

The ability to quantify each element's distinct isotopes makes ICP-MS useful for laboratories looking to compare the ratio of two isotopes of an element or one particular isotope.

Only a few elements cannot be measured by ICP-MS: F and Ne (which cannot be ionized in an argon plasma), Ar, N, and O (which are present at high levels in the plasma and air), and H and He (which are below the mass range of the mass spectrometer).

To know more about strontium isotopic visit:-

https://brainly.com/question/2496592

#SPJ1

The value of k for the air trapped inside the glass bottle before and after cooling is 0.2021, thus proving that P equals kT.

The air trapped inside a 240 mL glass bottle has a pressure of 1.0 atm and a temperature of 25.0 °C. To determine the value of k for the air trapped inside the glass bottle before and after cooling to show that P equals kT, we need to use the ideal gas law equation, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature. When the bottle is put into the freezer, the temperature decreases from 25.0 °C to -35.0 °C and the pressure decreases from 1.0 atm to 0.80 atm. Therefore, we can calculate the value of k by plugging in the values of pressure and temperature into the equation: PV = nRT. By rearranging the equation and solving for k, we find that k = PV/nRT. Plugging in the values, we get k = (1.0 atm x 240 mL) / (n x 0.0821 atm•L/mol•K x (25.0°C - (-35.0°C)) = 0.2021. This means that the value of k for the air trapped inside the glass bottle before and after cooling is 0.2021, thus proving that P equals kT.

For  more such questions on cooling

https://brainly.com/question/17282820

#SPJ11

The correct answer is option D, It can affect the AH value.

A phase change is a physical change in a substance in which the substance's state of matter is changed, such as from a gas to a liquid or from a liquid to a solid. It is also known as a phase transition.

Phase changes also involve changes in energy, temperature, and pressure. For example, when a solid melts to become a liquid, it absorbs energy and the temperature rises. When a liquid boils to become a gas, energy is released and the temperature decreases. Similarly, when a gas condenses to become a liquid, energy is released and the pressure increases.

Learn more about phase change here:

https://brainly.com/question/25664350

#SPJ1

Answer:

Table salt.

Explanation:

Table salt would shatter when hit with a hammer.

Scientists would research the impacts of marble monuments and acid rain. A chemist. Hoping this is useful.

The correct answer is :C.

Surface sediments are transported and large stones are broken up through wind, water, and ice. Years are often needed for weathering, erosion, and deposition to cause noticeable changes. Nonetheless, certain things change the Planet's surface far more quickly than others. Extreme events, earthquakes, and volcanic eruptions are a few of them.

Weathering and erosion caused by water movement change the properties of the terrain. Regional wind patterns and climate are defined by several interactions, including the role of the ocean. The unique physical and chemical properties of water have a profound effect on the planet's dynamics.

To know more about chemist visit :

https://brainly.com/question/30007736

#SPJ1

When we have the following balanced reaction, CH₃COOH + NaOH → CH₃COONa + H₂O, one mole of water is formed for each mole of acetic acid used.

Generally, we can define, Stoichiometry as the calculation of products and reactants in a chemical reaction. It is basically related with numbers. Mole ratio, is common type of stoichiometric relation, which relates the amounts in moles of any two substances in chemical reaction.

We have a balanced chemical reaction, CH₃COOH + NaOH → CH₃COONa + H₂O, where, acetic acid reacts with sodium hydroxide and water molecules formed with Sodium acetate. Now, we have to determine the moles of water are formed for each mole of acetic acid used.

Using the stoichiometry concept, one mole of acetic acid reacts with one mole of sodium hydroxide forming one mole of water and one mole of Sodium acetate. Therefore, one mole of water is formed for each mole of acetic acid used.

For more information about Stoichiometry, visit :

https://brainly.com/question/29007372

#SPJ4

Complete question:

if you have the following reaction,

CH₃COOH + NaOH ==> CH₃COONa + H₂O, how many moles of water are made for each mole of acetic acid used?

The correct IUPAC name for the carboxylic acid having a structural formula of CH3-CC is ethanoic acid, and its common name is propionic acid.

The correct IUPAC name and the common name for a carboxylic acid having a structural formula of CH3-CC is propanoic acid and propionic acid. Carboxylic acid is a group of organic compounds in which a carboxyl functional group (-COOH) is linked to a hydrocarbon chain. In carboxylic acids, the carbon atom of the carboxyl group is sp2 hybridized, with the remaining p orbital on the carbonyl carbon interacting with a neighboring O atom, allowing for the delocalization of the electron pair on the C=O bond. The carboxyl functional group is composed of a carbonyl group and a hydroxyl group.

The prefix for the group -COOH is carboxy-.The structural formula of CH3-CC:

To determine the IUPAC name and common name of the carboxylic acid with this structural formula, the steps below should be followed:

Propanoic acid is the IUPAC name for CH3-CC carboxylic acid. Propionic acid is the common name for CH3-CC carboxylic acid.

Therefore, the correct IUPAC name and the common name for a carboxylic acid having a structural formula of CH3-CC is propanoic acid and propionic acid.

For more such questions on IUPAC name , Visit:

https://brainly.com/question/28872356

#SPJ11

Answer: There are 3019.2 atoms of iron.

Answer:

Explanation:

Iron is a ductile, malleable, silver-white metallic element, scarcely known in a pure condition, but much used in its crude or impure carbon-containing forms for making tools, implements, machinery, etc. Symbol: Fe; atomic weight: 55.847; atomic number: 26; specific gravity 7.86 at 20°C.

1 mol contains [tex]=6.02\times10^{23}[/tex] particles, whether it be atoms, ions, molecules or whatever (Avogadro's number).

So you just divide:

[tex]\frac{2.96\times10^{20}}{6.02\times10^{23}}[/tex] = = 4.9169435215947 × 10^-4

Polysaccharides are a type of carbohydrate polymer composed of repeating units of monosaccharides. They are not one of the three main types of macromolecular polymers in the cell.

The reason for false statement are as following :-

a. The statement is false because polymers are assembled from monomers within the cell, not in an extracellular compartment. Cells have the ability to synthesize a variety of polymers, including nucleic acids, proteins, and carbohydrates, to perform specific functions within the cell. The assembly of polymers from monomers is an energy-intensive process that requires enzymes and specific conditions, such as the appropriate temperature and pH level. Therefore, the synthesis of polymers typically occurs within the cell.

A correct description would be: Polymers are assembled from monomers within the cell, and the synthesis of polymers is an energy-intensive process that requires enzymes and specific conditions.

b. The statement is false because polysaccharides are not one of the three main macromolecular polymers in the cell. The three main types of macromolecular polymers in the cell are nucleic acids, proteins, and carbohydrates. Polysaccharides are a type of carbohydrate polymer, but they are not one of the three main types of macromolecular polymers. Polysaccharides are composed of repeating units of monosaccharides, which gives rise to a limited number of polysaccharide sequences.

A correct description would be: Polysaccharides are a type of carbohydrate polymer composed of repeating units of monosaccharides. They are not one of the three main types of macromolecular polymers in the cell.

To know more about polymers, visit:-

https://brainly.com/question/1602388

#SPJ1

45g of H2O is equivalent to 2.497 moles of water.

The molar mass of water (H2O) is 18.015 g/mol.

To calculate the number of molecules in 45g of water, we need to use Avogadro's number, which is 6.022 x 10^23 molecules/mol.

First, we need to calculate the number of moles of water in 45g using the formula:

number of moles = mass / molar mass

number of moles = 45 g / 18.015 g/mol

number of moles = 2.497 mol

Then, we can use Avogadro's number to convert the number of moles to molecules:

number of molecules = number of moles x Avogadro's number

number of molecules = 2.497 mol x 6.022 x 10^23 molecules/mol

number of molecules = 1.505 x 10^24 molecules

Therefore, there are 1.505 x 10^24 molecules in 45g of water.

To calculate the number of moles in 45g of H2O (water), we need to use the molar mass of water, which is 18.015 g/mol.

We can use the formula:

number of moles = mass / molar mass

Substituting the values, we get:

number of moles = 45 g / 18.015 g/mol

number of moles = 2.497 mol (rounded to three significant figures)

Learn more about moles here:

https://brainly.com/question/26416088

#SPJ1

Answer:

Explanation:

The overall equilibrium equation can be obtained by combining the two given equations:

H2CO3 + OH- → HCO3- + H2O (1)

HCO3- + OH- → CO32- + H2O (2)

Adding equations (1) and (2), we get:

H2CO3 + 2OH- → CO32- + 2H2O

Dividing the second equation by the first, we get:

[CO32-][H2O]/[HCO3-] = K2

Multiplying the above equation with the first equation, we get:

[H2CO3][CO32-][H2O]^2/[HCO3-] = K1*K2

Thus, the equilibrium constant expression for the overall reaction is:

[K] = [H2CO3][CO32-][H2O]^2/[HCO3-]

where [K] = K1*K2.

Answer:

The chemical formula of aluminum sulfate is Al2(SO4)3.

The formula shows that there are 3 atoms of oxygen (O) in each molecule of Al2(SO4)3.

Number of molecules of Al2(SO4)3 = 3.5×1024

Number of O atoms in 1 molecule of Al2(SO4)3 = 3

Number of O atoms in 3.5×1024 molecules of Al2(SO4)3 = (3.5×1024) x 3

= 1.05×1025

Therefore, there are 1.05×1025 moles of O atoms in 3.5×1024 molecules of Al2(SO4)3.

Answer:

sound waves

Explanation:

hope this helps