1.______ language is the ability to understand what’s said.

2. When babies handle objects, they learn that they can
make something happen. This helps them begin to
understand and _______.

3. Caregivers can encourage language development by _____
to the baby.

4.______ is the ability of an infant to understand when
an object is present even if he or she can't see it.

5. Language development and thinking ability are _______.

6. Toddlers gain self-confidence when they _______.
Caregivers should expect toddlers to _______.

7.Caregivers should help children select television programs to watch and _______ the time they spend in this activity.


8. Superhero and fantasy play should be tempered with discussing the differences between _______ and reality.

Answer:

Positive charges: 2

Negative charges: 1

Overall charge: +1

Explanation:

In Diagram B we have the chemical element Helium (He). You can see in the Periodic Table that He has an atomic number of 2 and an atomic mass of approximately 4.

The atomic number is equal to the number of protons, so He has 2 protons. The protons are the positive charges in the atom, so the number of positive charges is 2. That is invariable, if the number of protons - or the atomic number - of an atom changes, it changes its identity.

In the drawing, we can see that the nucleus is composed of 2 protons (2 'p' particles) and 2 neutrons (2 'n' particles). The atomic mass is calculated as the number of protons and neutrons, so 2 protons+ 2 neutrons = 4.

The surrounding particle with an 'e' is an electron. So, we have 1 electron. Electrons are negative charges, so the number of negative charges is 1.

Now, we can calculate the overall charge. We add the positive charges (protons) and negative charges (electrons). Each proton has a +1 charge, whereas each electron has a -1 charge. Finally, we perform the addition:

Overall charge= (number of protons x charge) + (number of electrons x charge) = (2 x (+1)) + (1 x (-1)) = (+2) + (-1) = +1

Answer:

A. In a polar molecule, the bond is polar covalent. That is, the electrons are shared but are slightly more attracted to the more electronegative atom. That part of the molecule has a negative partial charge density, and the other has a positive partial charge density (there is no symmetry in the distribution of the electricity density)

B. Charges are not affected, the molecule is neutral because electrons are shared. A molecule has the same number of electrons and protons which balance the charges in a molecule. Since all atoms are electrically neutral, then when they combine the form of a neutral molecule.

Explanation:

To determine polarity, the geometry of the molecule must be taken into account to determine the distribution of atoms and their electronegativity (tendency to attract electrons) to determine to which points of the molecule the electrons will be most attracted.

Atoms can share electrons to form chemical bonds and thus form different compounds. In the case of non-polar molecules, when formed in a covalent bond (two atoms bond by sharing valence electrons reaching "stable octet") between equal atoms, the molecule is neutral since it has zero electric charge. In this type of bond there is no change in the oxidation number of the atoms because their shared electrons are equidistant. Covalent bonds in which the electrons are shared equally are called non-polar covalent bonds. This is because the atoms are just the same, they have the same electronegativity, so they "attract" the electrons with the same force and the electrons surround the atoms equally. The charge density distribution is the same for both, there is asymmetry in the distribution of it.

Polar molecules are formed when bonds are formed by different atoms with large differences in electronegativity. The molecule is electrically neutral as a whole because it has an equal number of positive and negative particles, but there is no symmetry in the distribution of the electricity density. A polar bond is one in which a pair of electrons is more attracted to one of the atoms. This causes one end of the molecule to acquire a positive partial charge density and the other end of the molecule to acquire a positive partial charge density and the other end of the molecule to acquire a negative partial charge.

So, as a summary:

A. In a polar molecule, the bond is polar covalent. That is, the electrons are shared but are slightly more attracted to the more electronegative atom. That part of the molecule has a negative partial charge density, and the other has a positive partial charge density (there is no symmetry in the distribution of the electricity density)

B. Charges are not affected, the molecule is neutral because electrons are shared. A molecule has the same number of electrons and protons which balance the charges in a molecule. Since all atoms are electrically neutral, then when they combine the form of a neutral molecule. Only ions do not have a neutral electrical charge because of the process of gaining or losing electrons. An ion with a positive electrical charge is called a cation, and an ion with a negative electrical charge is called an anion.

Answer: D

Explanation: Today, we know that the continents rest on massive slabs of rock called tectonic plates. They are constantly in movement and they are responsible for several natural disasters. Approximetly 335 million years ago, during the late Paleozoic and early Mesozoic eras, the world was one big mass, called Pangea, which eventually would start to break apart about 175 million years ago. At the center of the Earth is the core, which has two parts. The solid, inner core of iron has a radius of about 760 miles (about 1,220 km), according to NASA. It is surrounded by a liquid, outer core composed of a nickel-iron alloy.

I hope it helps

Answer:

the answer is D

Explanation:

Answer:

0.43 atm

Explanation:

From the question given above, the following data were obtained:

Initial pressure (P₁) = 0.95 atm

Initial volume (V₁) = 0.55 L

Final volume (V₂) = 1.22 L

Final pressure (P₂) =?

The final pressure of the gas can be obtained by using the Boyle's law equation as follow:

P₁V₁ = P₂V₂

0.95 × 0.55 = P₂ × 1.22

0.5225 = P₂ × 1.22

Divide both side by 1.22

P₂ = 0.5225 / 1.22

P₂ = 0.43 atm

Therefore, the final pressure of the gas is 0.43 atm

The final pressure of the gas is 0.43 atm.

Pressure is the process of force exerted perpendicular to any surface.

Given, the Initial pressure (P₁) is 0.95 atm

The initial volume (V₁) is 0.55 L

The final volume (V₂) is 1.22 L

To find the final pressure (P₂)

By the Boyle's Law

[tex]\rm P_1V_2= P_2V_2[/tex]

[tex]\rm 0.95\times 0.55 = P_2\times1.22\\\\0.5225 = P_2 \times 1.22\\\\Divided\;both \;side\;by\;1.22\\\\P_2=\dfrac{0.5225}{1.22} = 0.43 atm.[/tex]

Thus, the final pressure of the gas is 0.43 atm.

Learn more about pressure, here:

https://brainly.com/question/356585

Answer:

To run a spectrophotometry experiment, begin by warming up the spectrophotometer and preparing the samples. Be sure to select the correct wavelength, then run a measurement on the blank solution. Follow up by running measurements on sample solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.

Explanation:

The spectrophotometer is a device used in laboratories to carry out analysis in experiments that need to measure and compare the amount of light absorbed or transmitted between samples, regardless of whether the samples are transparent or opaque solid. The spectrophotometer can be single-beam and double-beam. Regardless of the nature of the beam, to perform a spectrophotometry experiment, you must start by heating the spectrophotometer and preparing the samples. Make sure to select the correct wavelength and perform a measurement on the blank solution. Follow up by performing measurements on sample solutions. Once the data is collected, turn off the instrument, clean the area and discard the samples.

2.26 × 10²⁴ atoms Zn

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

3.75 mol Zn (Zinc)

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

2.25825 × 10²⁴ atoms Zn ≈ 2.26 × 10²⁴ atoms Zn

Explanation:

Hydrogen is collected by downward displacement of water as it is less denser than water. Hence it comes out at the surface of water . It is insoluble in water so it does not dissolve in water. ... So, it is impossible to collect hydrogen gas in air medium.22-O

Answer:

A) The reaction is an exothermic reaction

B) 12.744 kJ

c) 49.976 KJ/mol . NaOH

Explanation:

A)  The reaction is an exothermic reaction

B) calculate the amount of heat that was released or absorbed by the reaction in this case. kJ

Assuming : specific heat of solution = specific heat of water = 4.186 J/g°C

mass of solution = 10.2 + 250 = 260.2 g

determine The heat released in the reaction

= mass of solution * specific heat of solution * temperature change

= 260.2 * 4.186 * ( 32.7 - 21 )

= 12.744 kJ

C) Calculate the reaction enthalpy ΔH per mole of NaOH. mol

Reaction enthalpy = - heat released / ( 10.2 /40 )

                               =  - 12.744 / ( 10.2/40 ) =  - 49.976 KJ/mol . NaOH

Answer:

Explanation:

From the given information;

Using ideal gas equation:

pV = nRT

when n = 1 mol

[tex]V = \dfrac{RT}{p}[/tex]

Initial molar volume = [tex]\dfrac{8.314 \ L.bar .k^{-1}.mol^{-1} \times 300 \ K}{1 \ bar}[/tex]

Initial molar volume = 2494.2 L.mol⁻¹

Final molar volume = [tex]\dfrac{8.314 \ L.bar .k^{-1}.mol^{-1} \times 300 \ K}{3 \ bar}[/tex]

Final molar volume = 831.4 L.mol⁻¹

Answer:

-Aluminum Oxide: The cation is Al3+ and the anion is O2-. The sum of the charges for aluminum oxide is 2(3+) + 3(2-) = 0. Thus, the formula is Al2O3. An ionic compound is named using the name of the cation followed by the name of the anion, eliminating the word ion from each.

Explanation:

Answer:  [tex]X_3Z_4[/tex]

Explanation:

For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.

Here metal X is having an oxidation state of +4 called as [tex]X^{4+}[/tex] cation and [tex]Z^{3-}[/tex] is an anion with oxidation state of -3. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]X_3Z_4[/tex]

[tex]X_3Z_4[/tex] is the formula of the resulting compound.

Answer:

A.

B.

Explanation:

Answer:

B.Two

Explanation:

Answer:

a) 6.3 cm

b) 8.0 cm

c) 0.7875

Explanation:

(a) The compound has moved above upto 7.3 cm from the bottom of the paper. Let us assume that line is drawn at 1.0 cm mark as the origin of spot. \

Distance traversed by compound= 7.3 - 1.0 cm = 6.3 cm

(b) Distance traversed by the solvent = 9.0 - 1.0 cm = 8.0 cm

(c) The Rf = Compound Migration distance / Solvent front migration distance

                      = 6.3/8.0 = 0.7875

Answer:

t = 1862 s

Explanation:

To do this, we need first to determine the theorical detention time, which can be determined with the following expression:

t₀ = ∀/Q  (1)

Where:

t₀: detention time

∀: Volume of the fluid in the reactor

Q: Flow rate in the reactor

With this time, we must use the following expression to determine the time that the workers will take to vent the tank:

C = C₀ e^(-t/t₀)   (2)

From here, we must solve for time t, and the expression will be:

t = ln(C₀/C) * t₀   (3)

Now that we know the expression to use, let's solve for t. Using (1) to determine the detention time, ∀ is 1900 m³, and Q is 2.35 m³/s so:

t₀ = 1900 / 2.35 = 808.51 s

Now, let's solve for the time t. C will be 0.0015 mg/L (or 1.5 mg/m³ cause in 1 m³ we have 1000 L) and C₀ 15 mg/m³:

t = ln(15/1.5) * 808.51

Hope this helps

Answer

The lanthanides and actinides are separated from the rest of the periodic table, usually appearing as separate rows at the bottom. The reason for this placement has to do with the electron configurations of these elements

Explanation:

Answer: a. 3.36 L

b. 33.2 g

Explanation:

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

Standard condition of temperature (STP)  is 273 K and atmospheric pressure is 1 atm respectively.

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

[tex]\text{Number of moles of} Fe_2O_3=\frac{16.0g}{159.69g/mol}=0.1mole[/tex]

[tex]3O_2(g)+4Fe(s)\rightarrow 2Fe_2O_3(s)[/tex]

a. 2 moles of [tex]Fe_2O_3[/tex] are produced by = [tex]3\times 22.4L=67.2L[/tex] of [tex]O_2[/tex]

Thus 0.1 moles of  [tex]Fe_2O_3[tex] are produced by =[tex]\frac{67.2}{2}\times 0.1=3.36L[/tex] of [tex]O_2[/tex]

b. [tex]3\times 22.4L=67.2L[/tex] of [tex]O_2[/tex] react with = [tex]4\times 55.8=223.2g[/tex] of iron

Thus 10.0 L of [tex]O_2[/tex] react with = [tex]\frac{223.2}{67.2}\times 10=33.2g[/tex] of iron

Answer:

1.01atm is the pressure of the gas

Explanation:

The difference in heights in the two sides is because of the difference in  pressure of the enclosed gas and the atmospheric pressure. This difference is in mm of the nonvolatile liquid. The difference in mm Hg is:

32.3mm * (0.993g/mL / 13.6g/mL) = 2.36mmHg

As atmospheric pressure is 765mm Hg and assuming the gas has more pressure than the atmospheric pressure (There is no illustration), the pressure of the gas is:

765mm Hg + 2.36mm Hg = 767.36 mmHg

In atm:

767.36 mmHg * (1atm / 760 mmHg) =

1.01atm is the pressure of the gas

Given:

Now,

The density of Hg will be:

= [tex]\frac{13.6}{0.791}[/tex]

= [tex]17.2 \ mm[/tex]

then,

= [tex]32.3\times (\frac{1 \ mm \ Hg}{17.2} )[/tex]

= [tex]18.73 \ mm \ Hg[/tex]

hence,

The pressure will be:

= [tex]765-18.73[/tex]

= [tex]746.27 \ mm \ Hg[/tex]

= [tex]0.993 \ atm[/tex]

Thus the above answer is right.

Learn more about gas vessel here:

https://brainly.com/question/7205294

Answer:

b. The pressure in the container will be 100mm Hg.

d. Some of vapor initially present will condense.

Explanation:

The vapor pressure of liquid Pantene rises when there is container where evacuation of water molecules is restricted. The pressure inside the container rises to 100 mm Hg and then liquid molecules start condensing. These molecule form vapors.

Answer:

Sorry i dont know

Answer:

What is the vapor pressure of an aqueous solution that has a solute mol fraction of c = 0.100? The vapor pressure of water is 25.756 mm Hg at 25°C.

12) The vapor pressure of an aqueous solution is found to be 24.9 mm Hg at 25°C. What is the mole fraction of solute in this solution? The vapor pressure of water is 25.756 mm Hg at 25°C.

9) Determine the molarity of an aspirin solution that produces an osmotic pressure of 0.0555 atm at 25°C (i = 1).

10) A saline solution is administered intravenously to patients who cannot take fluid orally and are in danger of dehydration. The osmotic pressure of this solution must match that of blood to prevent hemolysis or crenation of blood cells. What mass of sodium chloride (58.44 g/mol) is needed to produce 100.0 mL of saline solution with an osmotic pressure of 7.83 atm at a body temper

Explanation:

Answer:

Fertilizers play an important role in providing crops with the nutrients they need to grow and be harvested for nutritious food. Fertilizers help deliver enough food to feed the world's population. ...

For example, micronutrients such as zinc are important to human nutrition, especially children.

Explanation:

Hope it is helpful.....

Answer:

Dividend Divisor Quotient/ Remainder SAGOT 75 21 16.) 54 17.) 108 18.) 380 19.) 633 20.) 648 27 76 57 32. Solo nihanda ni: NNA MARIE S.

Explanation:

Answer:

a but it might also be c

Explanation:

i d k what this is

Answer:

2V1

Explanation:

Answer:

okay that is cool

Explanation:

Answer:

I hope it helps u! :)

Explanation: