1. How many moles of propane are present at STP if the volume is 65.0 L? Please show all work

The molecular weight of the unknown compound is 80.864g.

Only the solute's concentration affects freezing point depression; the solute's mass or chemical composition have no bearing. When it's cold outside, salt is often used to prevent ice from forming on roads by lowering the freezing point of water.

Depression in freezing point is Kb x m

T(f) - T  = Kb x  m

48.1 - 35.8 =  9.8 x m

m = 1.255

m = moles of solute x 1000/mass of solvent

moles of solute x 1000 / 10.0090  = 1.255

moles of solute = 0.0125

moles = mass / molar mass

1.0108  / molar mass  = 0.0125

molar mass =  1.0108 / 0.0125

molar mass = 80.864

so the molecular weight is 80.864g.

To know more about freezing point visit:

https://brainly.com/question/1550397

#SPJ4

Different substances have different properties because of the differences in their atomic and molecular structure, bonding types, and strength of their chemical bonds. These differences can be due to the number of atoms, the arrangement of atoms, and the types of electrons involved in the bonding.

The properties of elements and compounds are determined by the types and arrangements of the atoms that make up the substance. For example, water (H2O) and hydrogen peroxide (H2O2) have different properties due to their different molecular structures. Water is made up of two hydrogen atoms and one oxygen atom, while hydrogen peroxide is made up of two hydrogen atoms and two oxygen atoms. may have different characteristics. The strength of chemical bonds between atoms or molecules can be affected by the number and type of electrons involved in the bond. Because of this, some substances are more stable than others and have higher melting and boiling points.

In addition, some properties are also affected by the physical state of the material, such as solubility, density, and conductivity. These properties are determined by the strength of the intermolecular forces between the particles of the substance.

Learn more about the properties of the matter here: https://brainly.com/question/9402776

#SPJ4

108gm of hydrogen gas is present in2600ml container at 35-degree Celsius and at pressure of 165mm Hg.

Given data:

water = 2600ml

temp = 35°C & 95k

pressure = 165mm Hg & 0.162atm

From given information we apply ideal das equation to get moles.

PV = nRT

0.162atm * 2600ml = n 0.0821 * 95k

n = 54

Now we know 1 mole of hydrogen contain 2.016gm hydrogen.

In 54 moles we have 108gm hydrogen.

Learn more about ideal gas equation visit:

brainly.com/question/4147359

#SPJ4

If the molecular weight is 230.26 g/mol carbon = 73.03% = 230.26*73.03/100 = 168.15/12 = 14 Carbons Hydrogen = 6.13% = 230.26*6.13/100 = 14/1 = 14 Hydrogens Oxigen = 20.84% = 230.26*20.84/100 = 47.98/16 = 3 Oxygens Hence the empirical formula is C14H14O3

The International System for Units (SI) defines the newton as the unit of force, which is used to measure weight. For instance, a kilogram of matter weighs around 9.8 newtons on Earth's surface and around each as much on Moon.

Weight, which is expressed in newtons, is a unit of measurement for the gravitational force acting on an object. The mass of a bird with a mass of 15 g changes with the strength of the gravity influence acting on it, and would differ significantly if it were measured, for instance, on the Moon rather than on Earth.

To know more about weight visit:

https://brainly.com/question/6853752

#SPJ4

In literary classes, the three most popular types are verbal irony, dramatic irony, and situational irony. When a speaker or narrator says something that contradicts what they mean, what they intend, or what the context necessitates, this is called verbal irony.

One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.

Here,

The three most common varieties in literary studies are verbal irony, dramatic irony, and situational irony. Verbal irony occurs when a speaker or narrator says something that contradicts what they mean, what they intend, or what the context requires.

To know more about irony,

brainly.com/question/1695719

#SPJ4

Measuring fabric is one purpose for this wooden metric and meter stick that is perfect for many different applications.

Often employed in the construction business, a meterstick, metrestick, as well as yardstick refers to a straightedge or even a foldable ruler was using to measure length. They were frequently built of plastic or wood, with metal as well as plastic joints which enable folding.

A sewing or seam gauge would be a compact but helpful instrument for gauging tiny distances. The spaces needed for buttonholes as well as buttonhole spacing can also be measured using the sewing gauge, along with hemlines, tucks, as well as pleats.

To know more about wooden metric

https://brainly.com/question/15298079

#SPJ4

When bonding, atoms try to achieve a stable noble gas configuration.

Atoms are always trying to achieve stability. In the modern periodic table, noble gases present in the group 18 are the most stable. They have a completely filled outermost or the valence shell, that is, it contains 8 valence electrons in its valence shell.

Due to this stable electronic configuration, they are inert in nature, that is, they do not have a tendency to react by sharing or losing their electrons. When participating in a bonding, atoms try to lose or gain electrons to reach their nearest noble gas configuration and attain stability.

To know more about noble gas here

https://brainly.com/question/11414033

#SPJ4

Answer:

mass of alloy=165.36g

volume of alloy=21.2ml

density of alloy=7.8g/ml

A binary covalent bond exists between 2 nonmetals.

These compounds are termed similarly to binary ionic compounds even though they don't contain ions.

These guidelines apply to the nomenclature of binary covalent compounds:

The complete name of the first element in the formula is given first.

The name of the second element refers to it as an anion.

Prefixes are employed to indicate the number of atoms in a compound. The prefix mono- is dropped if the first element only has one atom.

For instance, carbon monoxide is the name given to CO rather than monocarbon monoxide.

To look more about covalent bond click here

brainly.com/question/10777799

#SPJ4

The net ionic equation for the reaction between aqueous sodium fluoride and hydrochloric acid is B. Na+ (aq) + F- (aq) + H+ (aq) + Cl- (aq) → Na+ (aq) + Cl- (aq) + HF (aq)

This is the net ionic equation for the reaction between aqueous sodium fluoride and hydrochloric acid. The balanced equation for this reaction is NaF (aq) + HCl (aq) → NaCl (aq) +HF (aq).

The net ionic equation is derived by canceling out the spectator ions, which are ions that don't participate in the chemical reaction. In this case, Na+ and Cl- are spectator ions, which means that they don't participate in the reaction and are present in the same form on both sides of the equation. Therefore, they are cancelled out, leaving the net ionic equation Na+ (aq) + F- (aq) + H+ (aq) + Cl- (aq) → Na+ (aq) + Cl- (aq) + HF (aq).

Learn more about net ionic equations here: https://brainly.com/question/19705645

#SPJ4

Dimensional evaluation makes use of conversion elements to use the unit in an quantity into an equal amount expressed with a exclusive unit.

For example, a conversion aspect might be used to transform meters to centimeters. Dimensional evaluation (additionally referred to as aspect label approach or unit evaluation) is used to transform from one set of gadgets to another. This approach is used for each simple (ft to inches) and complex (g/cm3 to kg/gallon) conversions and makes use of relationships or conversion elements among exclusive units of gadgets. A conversion ratio (or unit aspect) is a ratio same to one. This ratio includes the names of the gadgets for use withinside the conversion. It may be used for conversions in the English and Metric Systems, in addition to for conversions among the systems. The conversion unit is primarily based totally upon the idea of equal values.

To learn more about conversion unit check the link below:

https://brainly.com/question/28036423

#SPJ4

Answer: Distance : The length of the space between two points.

Speed:The rate at which someone or something moves or operates or is able to move or operate.

Velocity: Velocity is the directional speed of an object in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time.

Accerelation: Acceleration is the rate of change of the velocity of an object with respect to time. Accelerations are vector quantities. The orientation of an object's acceleration is given by the orientation of the net force acting on that object.

Explanation: Hope it helps!

Answer: We can calculate the energy levels of an atom

Explanation:

Spectral lines tell us how many different energy levels an atom has, and how far apart those energy levels are spaced.This is possible because spectral lines are the result of an excess (emission lines) or deficiency (absorption lines) of observed photons emitted from certain types of matter. The lines are caused by electrons moving between energy levels within individual atoms. Since each element emits it's own unique spectrum, this means that different types of atoms must have a distinct number of electrons in very particular energy levels.

The heat of vaporization for water is 40.7 kJ/mol. the heat energy must 150.0 g of water absorb to boil away completely is 6106 kJ.

The expression is given as :

q = m ΔH

where ,

q is heat energy

m is the mass

ΔH is the heat of the vaporization.

q = heat = ?

m = mass  = 150 g

ΔH = heat of vaporization = 40.7 kJ/mol

q = 150 × 40.7

q = 6106 kJ

Thus , if the heat of vaporization is 40.7 kJ/mol ,the heat energy required for 150 g of water absorb to boil away completely is 6106 kJ.

To learn more about heat vaporization here

https://brainly.com/question/24569455

#SPJ4

The row number in the periodic table corresponds to the highest principal quantum number (n) in the element's electron configuration, also known as the element's valence shell.

For main-group elements, the highest principal quantum number increases from n = 2 in the first row to n = 3 in the second row and n = 4 in the third row. This means that main-group elements in the first row have their valence electrons in the 2nd energy level (n=2), elements in the second row have their valence electrons in the 3rd energy level (n=3) and elements in the third row have their valence electrons in the 4th energy level (n=4).

Transition elements have electron configurations that deviate from this pattern, they have electrons in higher energy level (n>3) but these electrons are not in the valence shell. They have a different valence electron configuration which allows them to exhibit multiple oxidation states, and also they have a d-block in their electron configuration

Inner transition elements also deviate from this pattern, they also have electrons in higher energy level (n>3) but these electrons are not in the valence shell. They have a different valence electron configuration which allows them to exhibit multiple oxidation states, and also they have a f-block in their electron configuration.

To know more about valence electron visit: https://brainly.com/question/2725863

#SPJ4

The two portions on this module for which we can broaden unit elements to do dimensional analysis with chemical materials are volume and mass.

volume is a degree of the quantity of three-dimensional space occupied by using an object or substance. it's miles regularly measured in liters, cubic centimeters, or cubic meters. volume is used to measure the potential of a field, the dimensions of an object, or the quantity of liquid or gas in a given space. it's also used to determine the mass of an item, because the density (mass in line with unit quantity) is often acknowledged.

the 2 portions of volume and mass are critical for doing dimensional analysis with chemical substances because they help to measure the amount of a substance in distinct gadgets. extent is vital for measuring the quantity of liquid materials, and mass is critical for measuring the quantity of strong substances. each of these portions are vital for accurate and specific measurements of chemical substances, making them crucial for dimensional analysis.

To know more about chemicals click here

https://brainly.com/question/26487468

#SPJ4

Sodium chloride crystal will contain 4 atoms of chlorine and 5 atoms of sodium. Therefore, option B is correct.

In sodium chloride, each ion is usually surrounded by 6 ions of the opposite charge. The surrounding ions are positioned at the vertices of a regular octahedron.

In the language of close-packing, the larger chloride ions are arranged in a cubic array whereas the smaller sodium ions fill all the cubic gaps between them.

The basic structure is commonly known as the halite or rock-salt crystal structure. It can be represented as a face-centered cubic lattice with a two-atom basis or as two face centered cubic lattices. The one atom is located at lattice point, and the second atom is located halfway between lattice points along edge of the fcc unit cell.

Learn more about Sodium chloride, here:

https://brainly.com/question/6649122

#SPJ1

The trick with this type of problem is that they usually don't tell you anything because they don't seem to have enough information. But the key is in the phrase "parallel to the wire".

A charged particle in a field should normally bend. If not, there must be some other force at work that balances the magnetic force. In this case it is the electron attraction.

Therefore, the magnetic force on the electrons must be "upwards" (i.e., the electrons are supposed to be downwards, hence towards the wire). Also, its size must be equal to mg of electrons (its mass is easy to find).

For more information on magnetic field kindly visit to

https://brainly.com/question/11514007

#SPJ4

Ordered to run at 3.5 mg/min is a dose of lidocaine 2 g/500 mL D5W. The IV pump should be set at a rate of 52.5 mL per hour.

Given 1mg/min = 60mg/hour

Then 3.5 mg/min = 3.5 x 60 mg/hour = 210mg/hour

Lidocaine is 2gm/500mL = 2000mg/500mL

If you only need to calculate the infusion rate, or the amount of medication to infuse per hour, you can do it by taking the entire volume in mL and dividing it by the total number of hours the medication is supposed to be infused over. This will give you the rate in mL per hour.

Then the flow of rate = 210mg/hour / 2000mg/500mL = 210x500/2000 = 52.5mL/hour.

To learn more about flow of rate click here https://brainly.com/question/24560420

#SPJ4

The attractive force (intermolecular force) between these two molecules has most likely been produced by dipole-dipole interactions.

The correct option is B.

Intermolecular forces are forces of attraction or repulsion that act between atoms and other kinds of nearby particles, such as atoms or ions, to mediate interactions between molecules.

Some intermolecular forces are:

Considering the given molecules in the diagram:

Each molecule is made up of two distinct components, and as a result, each molecule has a constant bond dipole.

The attractive forces are dipole-dipole attractions because the dipoles do not cancel. The dipole-dipole attractions are substantially stronger than the dipole-induced dipole and London dispersion forces.

Learn more about dipole-dipole attractions at: https://brainly.com/question/29212710

#SPJ1

Be is the second element with two valence elements When a core electron is eliminated, the energy of ionization increases. From an element's electrical configuration, it is simple to see a significant change in ionization energy.

Electronically, beryllium is configured as 1s2 2s2. The outermost shell of beryllium has two valence electrons, hence the data on ionization energy will show a sharp rise or leap from the second to the third ionization energy due to the elimination of a core electron. Nitrogen has the following electrical configuration: 1s2 2s2 2p3. The outermost shell of nitrogen has five valence electrons, thus when one of them is removed, the ionization energy data for nitrogen will show a sharp rise or leap from the fifth to sixth ionization energy.

To learn more about ionization energy please click on below link

https://brainly.com/question/28385102

#SPJ4

answer :

this is the structure if you want it

AThe half-life of an isotope is the amount of time it takes for half of the atoms in a sample to decay. If the half-life of a sample of uranium-234 is 2.5 * 10^5 years, it means that after 2.5 * 10^5 years, half of the atoms in the sample will have decayed.

If you want to know how long it will take for only one sixth of the original mass to be left, you can use the following formula:

t = (half-life) * log(2) / log(1/6)

Plugging in the values, we get:

t = (2.5 * 10^5 years) * log(2) / log(1/6)

This simplifies to:

t = 3.7 * 10^5 years

So it will take approximately 3.7 * 10^5 years for only one sixth of the original mass to be left.nswer:

Efficiency and safety are important criteria for the design of ammonia production processes, as they consume less energy and reliably produce large amounts of ammonia with minimal risk of accidents.

Design criteria are specific characteristics or requirements that a design must meet in order to be successful. They provide clear and measurable criteria for evaluating designs, ensuring that the final product meets the needs and expectations of customers or users. Design criteria include not only technical specifications such as size, weight and materials, but also performance requirements such as safety, efficiency and durability. It can also include cost-related criteria such as manufacturing cost, ease of maintenance, and environmental aspects. The process of identifying and defining design criteria is an important step in the design process as it helps ensure that the final product meets user needs and is fit for purpose. This is important because as much of the reactants (nitrogen and hydrogen) as possible are converted to ammonia, thereby maximizing the yield of the process. This is important to make the process economical and produce large amounts of ammonia.

To know more about ammonia visit:

https://brainly.com/question/22387087

#SPJ4

The small lines marked on the Meterstick represents the measurement you make can be certain to the centimeter.

Centimeter is the metric unit of the measurement which is used for measuring the length of an object.

Meterstick is the measuring stick one meter long that is marked off in centimeters and usually millimeters. A meterstick is divided into 100 cm. The smallest lines on the meterstick are the centimeters which means that each measurement you make can be certain to the centimeter. It is used to measure the things in meters and centimeters. For example: Length of a table or the width of a bag can be measured by using a meterstick.

To know more about length here

https://brainly.com/question/30100801

#SPJ4

If someone who look up to does anything that makes you want to do something, this is known as direct pressure directly from the other person's mouth. The plan you use to accomplish the goal it your activity.

The Standard unit for pressures seems to be the pascal (Pa), which is equal to one newton / square meter (N/m2) of pressure is defined of surface. An object's pressure is inversely related to its force and proportional to both

Pressure is created by molecules moving quickly and crashing into the container's walls. The quantity and intensity of molecular collisions in a given region determine the pressure there.

To know more about pressure visit:

https://brainly.com/question/18107358

#SPJ1

In quartz, silicon has a mass percent of 46.7% while oxygen has a mass percent of 53.3%.

Given the total mass of a sample of quartz (SiO2) (m1) = 5.05g

Mass of silicon (m2) = 2.36g

The percent composition of an element in a chemical compound is referred to as mass percent. Mass percent may be expressed as follows:

mass percent  = mass of element/mass of sample x 100

The percent mass of silicon (p1)  =  2.36/5.05 x100 = 46.7%

The substance was made of silicon and oxygen.

Thus, 100% Quartz =%Silicon +%Oxygen can be used to express the mass percentage of quartz.

100% Quartz = 46.7% + % Oxygen

% Oxygen = 53.3%

Hence the percentages of silicon and oxygen in quartz are 46.7% and 53.3%.

To learn more about silicon click here https://brainly.com/question/28213172

#SPJ4

The final enthalpy of the overall chemical equation is -475.9KJ. and 2nd step must occur to calculate the final enthalpy.

Enthalpy depends only on the system's composition, temperature, and pressure; it is unaffected by the system's history. It is a quality or state function that resembles energy and has energy-like properties (and is thus measured in units of joules or ergs).

1st equation

C(s) + O₂ → CO₂ ΔH₁ = - 393.5KJ

2nd equation

CO + O₂ → 2CO₂ ΔH₂ = -566.0KJ

3rd equation

2H₂O → 2H₂ + O₂ ΔH₃ = 483.6KJ

Overall chemical equation is

C(s) + H₂ + O→ CO(g) + H₂(g)

The overall chemical equation's final enthalpy is

ΔH = ΔH₁ + ΔH₂ + ΔH₃

ΔH =  - 393.5 -566.0 + 483.6

ΔH = -959.5 + 475.9

ΔH = -475.9KJ.

To know more about enthalpy visit:

https://brainly.com/question/13996238

#SPJ4

Sodium does not form a stable ion with the same electronic configuration as neon.

Electronic configuration of an element describes that how the electrons are distributed in its atomic orbitals. Electronic configuration of an atoms follows a standard notation in which all electron-containing atomic subshells (with the number of electrons they hold written in superscript) are placed in a sequence.

Sodium (Na) ion has the same electronic configuration as that of neon. Both are the isoelectronic species with 10 electrons and the electronic configuration is 1s22s22p6.

Sodium has electronic configuration is 1s22s22p63s1. It loses one electron  to give Na+ ion with the electronic configuration of neon (Ne).

To know more about element here

https://brainly.com/question/13794764

#SPJ4