Answer: 1.1 kg
Explanation:
Mw CO2 is 44g —> 6.02214076*10^23 molecules
1.5*10^25 molecules —> 1.1 kg
Racecar driver Keimesha was in a race and accelerated from rest to 39 m/s by the time she reached the finish line. Keimesha’s car moved in a straight line and traveled from the starting line to the finish line in 6.0 seconds. What was the acceleration of the dragster?
Answer:
the acceleration of the racecar is 6.5 m/s²
Explanation:
Given;
initial velocity of the racecar, u = 0
final velocity of the racecar, v = 39 m/s
time of motion, t = 6.0 s
The acceleration of the racecar is calculated as;
[tex]a = \frac{v-u}{t} \\\\a = \frac{39-0}{6} \\\\a = \frac{39}{6} \\\\a = 6.5 \ m/s^2[/tex]
Therefore, the acceleration of the racecar is 6.5 m/s²
List the 4 cell structures from largest to smallest
Answer: The smallest structure is the double helix while the largest is the chromosome.
2. G2 phase is the third stage in cellular division wherein the cell prepares itself for the M phase.
3. Interphase comprises of 3 phases, namely, G1 phase, G2 phase, and S phase.
4. Metaphase is known to take less amount of time to complete.
Explanation:
1. The double helix of the DNA or deoxyribonucleic acid, nucleosome, coil, supercoil, and the chromosomes are all linked to the DNA and they vary in their sizes. The nucleosome is known to be the basic unit of the eukaryotic chromosome that is composed of DNA coiled around the histones. The supercoils and coils indicate to the structures which are derived from the folding as well as wrapping of the structure of the DNA. The chromosome refers to the thread-like structure which is made up of nucleic acid and is observed in the nucleus of the living organisms.
2. Cell cycle refers to the cellular division of the cell; it is the series of events which occurs within a cell that results in duplication of the DNA or deoxyribonucleic acid as well as division of the cytoplasm and other organelles in order to generate two daughter cells. This cycle comprises of 4 phases, namely, G1, S, G2, and M phase.
The cell enters the G1 phase wherein the cell synthesizes the proteins as well as mRNA or messenger ribonucleic acid in preparation for the next upcoming phases which lead to mitosis. Next stage is the S phase wherein the synthesis of DNA takes place.
G2 phase is the next phase wherein the cell prepares itself by allowing it to grow as well as generate new proteins needed for the next phase called M phase. Mitosis is the final stage wherein the two identical daughter cells are made from one parent cell.
3. The cell cycle is broadly segregated into 3 phases, namely, interphase, M phase, and cytokinesis. Interphase is the longest stage of the cellular cycle and it comprises of 3 phases, G1 phase, S, and G2 phase. There is a G0 phase or quiescent phase. During the G1 phase, the cell prepares itself for the next phases of cell cycle, S phase involves synthesis of DNA, and G2 is the production of new proteins needed for the M phase.
4. During the mitotic phase, the parental cell segregates and produces 2 identical daughter cells. This phase is further segregated into prophase followed by metaphase, anaphase, and finally telophase. During metaphase, the chromosomes align themselves onto the equatorial or metaphase plate and the centrosomes prepare to segregate the sister chromatids. This phase takes only about 4% of the time needed to finish the entire cell cycle.
Explanation:
24. The vaporization point of water is the same as its condensation point. True or False?
a. True
b. False
Answer:
pretty sure it's false
Explanation:
Which of the following does not describe a chemical property?
A. Gasoline burns.
B. Gold does not react with oxygen.
C. Bleach is poisonous when swallowed.
D. Lead is more dense than gold.
The one that does not describe a chemical property is bleach is poisonous when swallowed. The correct options are C.
What are chemical properties?Chemical properties are those properties that show the reactivity of an element. These chemical properties are pH, chemical stability, reactivity, radioactive decay, flammability, toxicity, etc.
Gasoline is a chemical compound, its burning will be a chemical property because it shows how it reacts when it comes in contact with another chemical.
Gold is a pure element, its reactivity tendency is a chemical property, and it is not reactive with oxygen. Density is also a property of an element. And lead is denser than gold, which will show a chemical property.
Thus, the correct options are C. Bleach is poisonous when swallowed.
To learn more about chemical properties, refer to the link:
https://brainly.com/question/5186976
#SPJ2
Observation of balloon rub with cloth?
Answer:
When rubbing a balloon with a wool cloth, it puts negative charges on the balloon. Negative charges attract to positive charges. ... When both balloons are rubbed with the wool cloth, the both receive negative charges, so they will repel each other.
Which group of elements is listed in order of decreasing size? O oxygen, nitrogen, carbon, boron O xenon, krypton, argon, neon O carbon, silicon, germanium, tin O lead, thallium, mercury, gold
Answer:
oxygen, nitrogen, carbon, boron
Explanation:
i need help with this science pls
Answer:
1)40n
2)25n
Explanation:
subtract the numbers if its on the opposite sides and add if its on same side
thank u hope it helps
Sulfuric acid, H 2 S O 4 , is an important industrial chemical, typically synthesized in a multi-step process. What is the percent yield if a batch of H 2 SO 4 has a theoretical yield of 3.9 kg, and 2.8 kg are obtained at the end of the process
Answer:
71.8%
Explanation:
The percent yield of a process or a chemical reaction is calculated as:
percent yield = actual yield/theoretical yield x 100%
From the problem we have:
theoretical yield = 3.9 kg
actual yield = 2.8 kg
Thus, we calculate the yield of H₂SO₄ production as follows:
percent yield = (2.8 kg/3.9 kg) x 100 = 71.79 % ≅ 71.8%
Which statement best defines the resistance of an electric circuit?
it limits the amount of electrical energy that can pass through a circuit.
It is the amount of electrical energy that is available in a circuit
It is the measurement of the rate of electrical energy in a circuit.
It describes how much electrical energy passes in a circuit.
Answer:
electric circuits can be dangerous
Explanation:
Answer:
The first one
it limits the amount of electrical energy that can pass through a circuit.
Heat will continue to move until the objects or areas have reached the same ______.
Answer: Thermal Equilibrium
Explanation:
Answer:
temperature
Explanation:
I think that's it i'm sorry if i'm wrong
Hydrocarbons are compounds that are composed of only carbon and hydrogen atoms. A hydrocarbon has a density of 2.59 g/L at STP. What is the molar mass of this hydrocarbon? Be sure to include units with your answer.
Answer:
58.0 g/mol
Explanation:
At STP, one mole occupies 22.4 liters. One mole of the hydrocarbon would have a mass of ...
(2.59 g/L)(22.4 L/mol) ≈ 58.0 g/mol
Answer:
58.0 g/molthe molar mass of this given hydrocarbonAcetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce of water. Be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
Answer:
0.225 mol = 0.23 mol to 2 significant figures
Explanation:
Calculate the moles of oxygen needed to produce 0.090 mol of water
The equation of the reaction is given as;
2 C2H2 + 5 O2 --> 4 CO2 + 2 H2O
From the equation of the reaction;
5 mol of O2 produces 2 mol of H2O
x mol of O2 produces 0.090 mol of H2O
5 = 2
x = 0.090
x = 0.090 * 5 / 2
x = 0.225 mol
A student increases the temperature of a 200 cm balloon from 60°C to 120°C.
What will the new volume of the balloon be?
A)100cm^3
B)200cm^3
C)263cm^3
D)400cm^3
Answer:
236 cubic cm
Explanation:
We are given that
Initial volume, V1=200 cubic centimeter
Initial temperature, T1=60 degree Celsius=60+273=333 K
Final temperature, T2=120 degree Celsius=120+273=393 K
Kelvin temperature=Celsius temperature+273
We have to find the new volume of the balloon.
We know that
Charles's law
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]
Using the formula
[tex]\frac{200}{333}=\frac{V_2}{393}[/tex]
[tex]V_2=\frac{200\times 393}{333}[/tex]
[tex]V_2=236cm^3[/tex]
Hence, the new volume of the balloon will be 236 cubic cm.
A reaction that proceeds by first-order irreversible kinetics is oxidizing chemical A in a wastewater treatment basin with a mean residence time of 1.5 hours. The reaction rate constant is The basin is unbaffled and may be characterized as two completely mixed tanks in series. If the steady-state influent concentration is 30 mg/l, find the effluent concentration. If baffles are placed in the basin so that the basin may be characterized as four completely mixed tanks in series, and the mean residence time remains constant, find the effluent concentration.
This question is incomplete, the complete question is;
A reaction that proceeds by first-order irreversible kinetics is oxidizing chemical A in a wastewater treatment basin with a mean residence time of 1.5 hours. The reaction rate constant is 2.0 Hr-1.The basin is unbaffled and may be characterized as two completely mixed tanks in series. If the steady-state influent concentration is 30 mg/l, find the effluent concentration.
If baffles are placed in the basin so that the basin may be characterized as four completely mixed tanks in series, and the mean residence time remains constant, find the effluent concentration.
Answer:
a) (two completely mixed tanks in series) the find the effluent concentration is 4.8 [tex]\frac{mg}{l}[/tex]
b) (four completely mixed tanks in series) find the effluent concentration is 3.2 [tex]\frac{mg}{l}[/tex]
Explanation:
Given the data in the question;
we can determine the effluent concentration of two completely mixed tanks in series for first order irreversible reaction using the following equation;
C = Co ( 1 / ( 1 + K[tex]\frac{t}{n}[/tex] )ⁿ
t is the mean hydraulic residence time for two completely mixed tanks in series ( 1.5 hr)
Co is initial concentration of the influent ( 30 [tex]\frac{mg}{l}[/tex] )
C is final concentration of effluent,
n is the number of tanks series ( 2)
k is rate constant for the given first order reaction( 2[tex]\frac{1}{hour}[/tex] )
so we substitute
C = 30 [tex]\frac{mg}{l}[/tex] ( 1 / ( 1 + 2[tex]\frac{1}{hour}[/tex] . [tex]\frac{1.5}{2}[/tex] )²
C = 30 [tex]\frac{mg}{l}[/tex] × ( 1/2.5)²
C = 30 [tex]\frac{mg}{l}[/tex] × 0.16
C = 4.8 [tex]\frac{mg}{l}[/tex]
Therefore, (two completely mixed tanks in series) the find the effluent concentration is 4.8 [tex]\frac{mg}{l}[/tex]
b)
using;
C = Co ( 1 / ( 1 + K[tex]\frac{t}{n}[/tex] )ⁿ
t is the mean hydraulic residence time for two completely mixed tanks in series ( 1.5 hr)
Co is initial concentration of the influent ( 30 [tex]\frac{mg}{l}[/tex] )
C is final concentration of effluent,
n is the number of tanks series ( 4)
k is rate constant for the given first order reaction( 2[tex]\frac{1}{hour}[/tex] )
so we substitute
C = 30 [tex]\frac{mg}{l}[/tex] ( 1 / ( 1 + 2[tex]\frac{1}{hour}[/tex] . [tex]\frac{1.5}{4}[/tex] )⁴
C = 30 [tex]\frac{mg}{l}[/tex] × ( 1/1.75)²
C = 30 [tex]\frac{mg}{l}[/tex] × 0.107
C = 3.2 [tex]\frac{mg}{l}[/tex]
Therefore, (four completely mixed tanks in series) find the effluent concentration is 3.2 [tex]\frac{mg}{l}[/tex]
Fires mostly frequently occur in the kitchen true or false
HELP ASAP
Over an interval of 2.0 s the average rate of change of the concentration of C was measured to be 0.0540 M/s. What is the final concentration of A at the end of this same interval if its concentration was initially 2.000 M
Answer:
Explanation:
the average rate of change of the concentration =
( initial concentration - final concentration ) / time
Initial concentration = 2.000 M
the average rate of change of the concentration = .0540 M/s
time = 2 s
Putting the values
.0540 = (2.000 - X ) / 2
0.108 = 2.000 - X
X = 1.892 M .
Final concentration = 1.892 M .
Describe the breeding place, type of fertilization, and development of the
embryo of the selected animals listed in the table below.
Table 2. Reproduction and Development in Selected Animals
help help
patulong po
Answer:
Breeding is defined as the process of mating or sexual reproduction between two organism to produce an offspring.
Fertilization is the process in which eggs and sperm fuse together to form a zygote.
After fertilization, embryo development takes place inside females body and form a whole new organism or plant.
In the given examples:
Milkfish:
Breeding place land or water: water
Fertilization external or internal: internal
Development of embryo (outside or inside) the female's body: outside
Cat:
Breeding place land or water: Land
Fertilization external or internal: internal
Development of embryo (outside or inside) the female's body: inside
Frog:
Breeding place land or water: Land
Fertilization external or internal: inside
Development of embryo (outside or inside) the female's body: outside
Duck:
Breeding place land or water: Land
Fertilization external or internal: Internal
Development of embryo (outside or inside) the female's body: Outside
Cow:
Breeding place land or water: Land
Fertilization external or internal: internal
Development of embryo (outside or inside) the female's body: inside
For the reaction C + 2H2 → CH4, how many grams of hydrogen are required to produce 13.1 moles of methane, CH4 ?
Round your answer to the nearest tenth. If your answer is a whole number like 4, report the answer as 4.0
Answer:
7.0
Explanation:
How many grams of O2 are formed from 13.34 moles of KClO3? Provide your final answer rounded to two decimal places.
2 KClO3 → 2 KCl + 3 O2
Answer:
640.32 g
Explanation:
2KClO₃ → 2KCl + 3O₂
First we convert KClO₃ moles to O₂ moles, using the stoichiometric coefficients:
13.34 mol KClO₃ * [tex]\frac{3molO_{2}}{2molKClO_{3}}[/tex] = 20.01 mol O₂Then we convert O₂ moles to grams, using its molar mass:
20.01 mol O₂ * 32 g/mol = 640.32 gSo 640.32 g of O₂ are formed from 13.34 moles of KClO₃.
What will a child given a vaccine hopefully develop?
O A. Antibiotic Resistance
OB. Immunity
0
C. Mutages
D. Increased Growth
Answer:
B (immunity) is the answer
A bottle of viranin water contains 3500 mg of potassium in 591.5 mg of H2O. What is the concentration of potassium by mass percent
Answer: 085.5%
Explanation:
Which of the following statements about semi-empirical methods are true?
a. It combines a theoretically sound model of bonding with some experimentally determined parameters.
b. It is faster to calculate than ab initio methods.
c. It can determine precisely both the location and the energy of bonding electrons.
d. It treats bonds simply as springs.
Answer:
a
Explanation:
The correct statement about semi-empirical methods is
It combines a theoretically sound model of bonding with some experimentally determined parameters.
These methods are typically referred to by acronyms which encode some of the underlying theoretical assumptions.
The mineral content of rocks helps to
classify them.
B
weigh them.
с
melt them.
D
find them.
Answer:
Explanation:
The rocks are composed of mineral grains combined in different ways and having various properties. Minerals are naturally occurring chemical compounds in which atoms are arranged in three-dimensional patterns.
what is the atomic number for meitnerium
Answer:
"Meitnerium/Atomic number""109"Explanation:
Meitnerium, the topic of this podcast, with the symbol Mt and atomic number 109, sits in the middle of this band in group 9 underneath cobalt, rhodium and iridium.
Hope this is fine for youLiquid octane CH3CH26CH3 will react with gaseous oxygen O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. Suppose 2.3 g of octane is mixed with 12.4 g of oxygen. Calculate the minimum mass of octane that could be left over by the chemical reaction. Round your answer to 2 significant digits.
Answer: Octane will be used completely.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of octane}=\frac{2.3g}{114g/mol}=0.0202moles[/tex]
[tex]\text{Moles of oxygen}=\frac{12.4g}{32g/mol}=0.388moles[/tex]
The balanced chemical reaction will be
[tex]2C_8H_{18}+25O_2(g)\rightarrow 16CO_2(g)+18H_2O(g)[/tex]
According to stoichiometry :
2 moles of octane require = 25 moles of [tex]O_2[/tex]
Thus 0.0202 moles of octane will require=[tex]\frac{25}{2}\times 0.0202=0.2525moles[/tex] of [tex]O_2[/tex]
Thus octane is the limiting reagent as it limits the formation of product and [tex]O_2[/tex] is the excess reagent.
Thus octane will be used completely.
PLEASE HELP ME
If you start with 6 waters
going in during photosynthesis, how many waters are released during cellular respiration?
2
6
12
3
Answer:
Water is also a product of photosynthesis. This water is produced from the oxygen atoms in the carbon dioxide molecules. The oxygen molecules released into the atmosphere come exclusively from the original water molecules, not from the carbon dioxide molecules...
Hope this helps answer your question!
B r a i n l e i s t ?
Please explain to me!!!
Answer:
nice handwrtting
Explanation:
How much heat energy is required to raise the temperature of 0.362 kg of copper from 23.0 ∘C to 60.0 ∘C? The specific heat of copper is 0.0920 cal/(g⋅∘C) .
Answer:
83
Explanation:
23+60=83
With the given chemical compounds, what is the balanced chemical equation when lit with fire?
Answer:
Russia es el mejor pais? Vladimir Putin, es el mejor presidente del mundo
what was the area of the himalayas like 40 million years ago
Answer:
yeskkfslszv
Explanation:
frgkkfsssssssss
Answer:
They were relatively flat.