1. Determine whether or not the equation below is balanced. If it isn’t balanced, write the balanced form. Also, identify the reactant(s) and product(s) in this equation. Finally, label this as one of the five types of reactions: combination, decomposition, substitution, double replacement, or reversible.

Answers

Answer 1

Answer:

- Not balanced.

- Reactants: Zn  and HCI .

- Products: ZnCl₂ and  H₂.

- Substitution reaction.

Explanation:

Hello,

In this case, for the given reaction:

Zn  +  HCI  →  ZnCl₂ +  H₂

We can see that it is not balanced due to the fact that at the left side we have one hydrogen atom whereas at the right side two, taking into account the number must be same as well as chlorine. Thus, in order to balance we write:

Zn  +  2HCI  →  ZnCl₂ +  H₂

And that is enough. Moreover, we can see that the chemical species at the left side of the equation are the reactants and those at the right side the products, thus we have:

Reactants: Zn  and HCI .

Products: ZnCl₂ and  H₂.

Finally, since we can see that the chlorine is at the reactants with hydrogen, but at the end with the zinc, and the initial zinc is alone as well as the yielded hydrogen we can infer this is a substitution reaction.

Best regards.

Answer 2

Answer:

The equation isn't balanced because there aren't equal numbers of hydrogen or chlorine atoms on both sides of the equation. To correct this, a coefficient of 2 must be placed in front of HCl on the left-hand side of the equation.

Explanation:


Related Questions

At a given temperature, an unknown gas takes 10.0 minutes to travel the distance helium gas travels in 1.66 minutes. What is the approximate molar mass of the unknown gas

Answers

Answer:

The molar mass of the unknown is approximate 145g/mol

Explanation:

We can relate the speed of effusion of gases with the molar mass of the 2 compounds using Graham´s law:

[tex]\frac{v_a}{v_b} =\sqrt{ \frac{m_b}{m_a} }[/tex]

Where V is speed of the gas and m molar mass of a and b gases.

Molar mass of helium is 4g/mol. As the distance of the gases is the same, we can replace the speed of effusion with the time the gas takes to travel the distance. The equation will be:

[tex]\frac{t_b}{t_a} =\sqrt{ \frac{m_b}{m_a} }[/tex]

Replacing:

[tex]\frac{10.0min}{1.66} =\sqrt{ \frac{m_b}{4g/mol} }\\6.024 = \sqrt{ \frac{m_b}{4g/mol} }\\36.29 = \frac{m_b}{4g/mol}\\145 g/mol =m_b[/tex]

The molar mass of the unknown is approximate 145g/mol

What is the rate constant of a first-order reaction when 20.0% of a reactant remains after 73.5 s?

Answers

Answer:

Half-lives of first order reactions

Explanation:

Notice the the half-life is independent of initial concentration. This is not the case with other reaction orders. The half-life of a first-order reaction was found to be 10 min at a certain temperature. hope this helps you :)

0.0453 sec⁻¹  the rate constant of a first-order reaction when 20.0% of a reactant remains after 73.5 s.

What is rate constant?

The constant is indeed a proportional factor in chemical kinetics' rate equation that connects reactant molar concentration to reaction rate. It is additionally known as the pre - exponential factor or reaction rate factor and is represented by the symbol k in an equation.

The constant, k, is indeed a constant of proportionality that illustrates the connection between reactant molar concentration and reaction rate. Using the molar quantities of the reagents and the sequence of reaction, the constant may be determined experimentally. It may also be computed using the Following equations.

t1/2 = 0.693/k

Fraction remaining = 0.5n

n = number of half lives

0.20 = 0.5n

log 0.20 = n log 0.5

n = 2.32

2.32 half lives = 35.5 sec

1 half life = 15.3 sec

15.3 sec = 0.693/k

k = 0.0453 sec-1

Therefore, 0.0453 sec⁻¹  the rate constant of a first-order reaction when 20.0% of a reactant remains after 73.5 s.

To know more about rate constant, here:

https://brainly.com/question/14977272

#SPJ6

who discovered copper

Answers

Explanation:

The exact person is unkown cooper has been around for ages since 9000 BC in the Middle East are the earliest discoveries

Although various copper tools and decorative items dating back as early as 9000 BCE have been discovered, archaeological evidence suggests that it was the early Mesopotamians who, around 5000 to 6000 years ago, were the first to fully harness the ability to extract and work with copper

Erica is bisecting an angle as shown. Which of the following should be her next step

Answers

Answer:

She should bisect from point M and then draw a line from the point where the arcs from M and N meet to point O

Suppose you wanted to study the relationship between high
school graduation rate and crime. What might your hypothesis be?
What would be the independent variable in your study? The
dependent variable? What existing data could you examine to
support your hypothesis?

Answers

Answer:

Hypothesis: High school graduation rate does not have an effect on the rate of crime in the society

Independent variable: Rate of high school graduation

Dependent variable: crime

Existing data: Crime data/reports (for the duration of interest) from different (randomized) police stations and the High school graduation rate data/information (for the same duration of interest) from the schools in the same jurisdictions as the police stations.

Explanation:

1) Before conducting an experiment, a hypothesis has to be put forward. This  hypothesis is then proven or unproven by the outcome of the experiment. One of the best ways of proposing a hypothesis is the use of null hypothesis, which suggests that there is no significant difference or "connection" between two variables. Here, the null hypothesis can be "High school graduation rate does not have an effect on the rate of crime in the society"

2) An independent variable is a variable whose variation is not determined or thought to be determined by the change(s) in the other variable. Here, high school graduation rate is not determined or thought to be determined by the other variable.

3) A dependent variable is a variable whose variation is predicted to be as a result of the change(s) in the other variable. Here, the rate of crime is predicted to be as a result of the high school graduation rate

4) Existing/available data that can be used to examine the hypothesis proposed earlier can be obtained from the crime data/reports (for the duration of interest) from different (randomized) police stations and the High school graduation rate data/information (for the same duration of interest) from the schools in the same jurisdictions as the police stations.

Which of the following is true about the scientific method?

a
Each step is related to the others.
b
It is an iterative process.
c
All of the answers are correct.
d
It is a step-by-step process.
e
It involves a logical flow.

Answers

Answer:

It is a step by step process

Explanation:

You cannot do the experiment and lab report without following the steps

Hope this is correct and helpful

HAVE A GOOD DAY!

What is the answer with the correct significant figures to the addition problem 1.2773 + 4.29

Answers

Answer:5.5673

Explanation: I searched it up for you

If the components of a solution are in the same state, which one is the solvent?​

Answers

Answer:

Usually, the substance present in the greatest amount is considered the solvent.

What information about a chemical solution can be inferred from knowing its pH value?

Answers

Answer:

See the answer below

Explanation:

The information than can be inferred from knowing the pH value of a chemical solution is the hydrogen or hydroxyl ion concentration of the solution.

The pH of a solution is the degree of acidity or alkalinity of the solution. Mathematically, the pH of a solution is expressed as:

pH =  [tex]-log_{10}[H^+][/tex] where [tex][H^+][/tex] = hydrogen ion concentration.

Also,

pH = 14 - pOH, where pOH = [tex]-log_{10}[OH^-][/tex]

The more the [tex][H^+][/tex] of a solution, the lower the pH, and the more the [tex][OH^-][/tex] of a solution the higher the pH. The pH value ranges from 0 - 14 with 7 being a neutral pH.

Answer:

Explanation:

The hydrogen or hydroxyl ion concentration of the solution could be inferred from knowing its pH value.

Specify whether each compound is soluble in hexane.Classify the appropriate items to their respective category.
a. hydrogen chloride (HC)
b. hydrogen sulfide (H2S)
c. water (H2O)
d. propane (CH3CH2CHs)
1. Soluble in hexane
2. Insoluble in hexane

Answers

Answer:

hydrogen chloride (HC)- insoluble in hexane

hydrogen sulfide (H2S)- insoluble in hexane

water (H2O)- insoluble in hexane

propane (CH3CH2CH3)- soluble in hexane

Explanation:

Generally, it is a principle in chemistry that polar solvents dissolve polar substances while nonpolar solvents dissolve nonpolar substances.

This is because, dissolution of a substance in another substance depends on the kind of intermolecular interaction that is possible between the two substances. Hence, ionic substance dissolve in polar solvents due to dipole interactions and nonpolar substances dissolve in nonpolar solvents due to Vanderwaals interaction between the solute and solvent.

Hydrogen chloride, hydrogen sulphide and water are ionic substances hence they can not dissolve in hexane which is a nonpolar substance. However, propane is a nonpolar solvent hence it dissolves in hexane.

Answer: butane (CH3CH2CH2CH3) soluble

hydrogen chloride ( HCl) insoluble

hydrogen sulfide (H_2S) insoluble

water (H_2O) insoluble

How many asymmetric centers are present in the open chain form of the aldohexose D-(-)-gulose?
A) 0
B) 1
C) 2
D) 4
E) 5

Answers

Answer:

D) 4

Explanation:

If we want to find the asymmetric centers, we must first remember that in an asymmetric center, in the carbon, we will have 4 different types of groups bonded to it.

Therefore we must look for carbons that have 4 different groups. With this in mind, we can look at each carbon.

Carbon 1

In this carbon, we have two bonds with the oxygen, therefore, we dont have 4 different groups. So, this is not an asymmetric center.

Carbon 2

In this carbon, we have an "OH" in the top, an hydrogen in the bottom a carbonyl group in the right, and a CHOH in the left. We have 4 different groups. So, this is an asymmetric center.

Carbon 3

In this carbon, we have an "OH" at the bottom, an hydrogen in the top, a CHOH group in the right (that is bonded to a carbonyl group), and a CHOH in the left. We have 4 different groups. So, this is an asymmetric center.

Carbon 4

In this carbon, we have an "OH" at the top, an hydrogen in the bottom a CHOH group in the right (that is bonded to a CHOH group), and a CHOH in the left. We have 4 different groups. So, this is an asymmetric center.

Carbon 5

In this carbon, we have an "OH" at the bottom, an hydrogen in the top, a CHOH group in the right (that is bonded to a CHOH), and a CH2OH in the left. We have 4 different groups. So, this is an asymmetric center.

Carbon 6

In this carbon, we have two bonds with hydrogens, therefore, we dont have 4 different groups. So, this is not an asymmetric center.

See figure 1

I hope it helps!

A C≡C triple bond contains-

A) 3 σ bonds
B) 2 σ bonds and one π bond
C) one σ bond and 2 π bonds
D) three π bonds
E) one-and-a-half σ bonds and one-and-a-half π bonds

Answers

Answer:

i think its D but im not really good with this calls tho

surface tension of solid,liquid and gas​

Answers

Explanation:

Surface tension is the tendency of liquid surfaces to shrink into the minimum surface area possible. Surface tension allows insects, usually denser than water, to float and slide on a water surface.

Hydrophobic interactions help to stabilize the ________ structure(s) of a protein.

a. primary
b. secondary
c. secondary and tertiary
d. tertiary and quaternary
e. secondary and quaternary

Answers

Answer:

d. tertiary and quaternary

Explanation:

Form or shape of protein can be understood by its structure. The structure of protein encompasses four levels of protein :

Primary (Simplest layer of amino acids in polypeptide chain), Secondary (Atom - Backbone folding structure within polypeptide),Tertiary (R groups of amino acids), Quaternary (multiple polypeptide chain subunits).

Hydrophobic Interactions refers to amino acids with non polar r group structure together on inside of protein, which leaves Hydrophobic amino acids outside to interact with surrounding water molecules.

These help to stabilise : D) Tertiary & Quaternary protein structures.

During a titration, the solution with the unknown concentration is called the _____.

Answers

Answer:

Analyte.

Explanation:

Hello,

In this case, in a titration, an analyte is known as the the substance whose quantity or concentration is to be carefully determined (initially unknown) by using a titrant with a controlled volume and an accurately-known concentration which is also called a standard solution.

You can verify this by considering the attached picture.

Regards.

QUICK WILL MARK BRAINLIEST!!
Match each of the unknown ions to its appropriate description.

A− A) A nonmetal that gained one electron
B+ B) A metal that lost one electron
C2− C) A metal that lost two electrons
D2+ D) A nonmetal that gained two electrons

Answers

Answer:

Explanation:

1.A-

2.B+

3.D2+

4.C2-

The element carbon would be expected to form covalent bond(s) in order to obey the octet rule. Use the octet rule to predict the formula of the compound that would form between carbon and bromine, if the molecule contains only one carbon atom and only single bonds are formed. Formula:

Answers

Answer and Explanation:

The octet rue  depicts the overall trend of chemical bonding in which atoms of an elements would seek to attain stability by filling out their valence shell with eight (8) electrons, giving it the same electronic configuration as a noble gas (specifically Argon).

Hence Carbon with 4 valence electrons (2, 4 electronic configuration) would take on four bromine atoms with 7 valence electrons (2, 8, 4 electronic configuration) each, giving each Br atom the single electron it needs to achieve octet stability.

Carbon tetrabromide

Chemical formula: [tex]CBr_{4}[/tex]

I  hope this is a clear explanation

59.23
An atom contains one proton, one electron, and one neutron. Which two particles are most similar in mass?
O the neutron and the electron
O the proton and the electron
the proton and the neutron
O the neutron and the atom

Answers

Answer:

the proton and the neutron

Explanation:

mass of The proton is approximately  1.6726 × 10^-27 Kg

mass of the electron  is approximately 9.109 × 10^-31 Kg

mass of the neutron  is approximately 1.6749 × 10^-27 Kg

Here we see that mass of proton and neutron is approximately similar.

_____________________________________________

Lets see what is  the mass of these particle IN atm unit

mass of these particles can also be described in form of amu(atomic mass unit)

1 atm is the mass defined as 1/12 th of mass of the carbon-12(c-12) atom.

In terms of unit atm

mass of proton = 1 amu

mass of electron = 5.45 × 10−4 amu

mass of neutron = 1 amu

hence we can say that mass of proton = mass of neutron.

mass of atom is sum of mass of all the neutron and proton in the atom.

Hence, mass of neturon and atom cannot be equal.

This makes option four the neutron and the atom , the wrong choice.

correct answer is the proton and the neutron

therefore, An atom contains one proton , one electron and one neutron then, mass of proton is similar in mass of neutron.

Answer:

proton and neutron

Explanation:

In this simulation what do you think the bread and cheese separately represent, the atom or the molecule?

Answers

Answer:

the atom

Explanation:

The bread and cheese separately represent the atom because both bread and cheese are different from one another and we cannot assume it as a molecule because molecules formed when the group of atoms combine together by making bonds with each other and we know that bread and cheese did not make bonds with each other, they only attached, so we called them atoms not molecule.

Substances that are composed of a network of atoms held together by covalent bonds are called
O A. ionic lattices
B. giant covalent structures
C. allotropes
D. diatomic networks

Answers

Answer:

giant covalent structures

Explanation:

Covalent solids are made up of atoms joined to one another by covalent bonds to form a giant lattice. The covalent bonds are very strong, this makes the giant covalent solids to be hard and possess high melting points. Covalent solids are nonconductors of electricity due to the absence of free electrons in the structure.

Diamond, graphite and boron nitride are all examples of giant covalent structures.

a chemist encounters an unknown metal. They drop the metal into a graduated cylinder containing water, and find the volume change is 3.2 mL. If the metal weighs 1.5g, what is the density in g/mL of the metal?

Answers

The density of metal will be "0.469 g/mL".

The given values in the question are:

Mass of metal = 1.5 gVolume of metal or Volume change = 3.2 mL

Now,

The density of metal will be:

→ [tex]Density = \frac{Mass}{Volume}[/tex]

By substituting the given values, we get

→               [tex]= \frac{1.5}{3.2}[/tex]

→               [tex]=0.469 \ g/mL[/tex]

Thus the above is the appropriate answer.

Learn more about volume of metal here:

https://brainly.com/question/17928778

The density of the metal is 0.47 g/mL

The density of an object is defined as the mass of the object per unit volume of the object.

Density = mass / volume

With the above formula, we can obtain the density of the metal. This is illustrated below:

Volume of metal = change in volume of water = 3.2 mL

Mass of metal = 1.5 g

Density of metal =?

Density = mass / volume

Density = 1.5 / 3.2

Density of metal = 0.47 g/mL

Therefore, the density of the metal is 0.47 g/mL

Learn more: https://brainly.com/question/24472494

An endothermic reaction is one that:
A. produces light
B. produces gas
C. involves no temperature change
D. absorbs heat
cines exam​

Answers

Answer:

D. absorbs heat

Explanation:

Examples of endothermic reactions ---

1.Melting ice cubes.

2.Melting solid salts.

3.Evaporating liquid water.

While in Europe, if you drive 109 km per day, how much money would you spend on gas in one week if gas costs 1.10 euros per liter and your car's gas mileage is 22.0 mi/gal ? Assume that 1euro=1.26dollars.

Answers

Answer:

113.12 dollars

Explanation:

From the question we are told that you drive 109km/day and your gas milage = 22miles/gallon

Step 1

We convert 109km to miles

1 km = 0.6214 miles

109km =

109km × 0.6214miles/ 1 km

= 67.7326miles

Step 2

Since the gas mileage = 22miles per gallons, we calculated how many gallons of fuel you used in a day

22 miles = 1 gallon

67.7326 miles = x gallon

Cross Multiply

x gallon × 22 miles = 67.7326 × 1 gallon

x gallons = 67.7326 miles × 1 gallon/22 miles

x gallons = 3.0787545455 gallons

Approximately = 3.08 gallons of gas

Hence, in a day you use 3.08 gallons of gas.

Step 3

We are told that has cost 1.10 euros/ liter

Hence, we convert the amount of gas you used in gallons to liters

1 gallon = 3.785 liters

3.08 gallons = y liters

1 gallon × y liters = 3.08 gallons × 3.785 liters

y liters = 3.08 × 3.785/1

y = 11.6578 liters.

So in a day you use 11.6578 liters of gas.

Step 4

Assume that 1euro=1.26dollars.

We are also told that has = 1.10 euros per liters

We convert the amount in Euros to dollars

1 euro = 1.26 dollars

1.10 euros =

1.10 × 1.26

= 1.386 dollars

Hence gas costs 1.386 dollars per liter

Step 5

Since : 1 liter of gas = 1.386 dollars

11.6578 liters of gas =

= 11.6578 liters × 1.386 dollars/ 1 liter

= 16.1577108 dollars

Therefore, in 1 day, you spend approximately = 16.16 dollars on gas

Step 6

The final step:

We are asked to calculate how much you spent on gas in 1 week

1 week = 7 days

Therefore, if

In 1 day you spend = 16.16 dollars on gas

7 days =

= 7 × 16.16 dollars

= 113.12 dollars

Therefore, the amount money you would spend on gas in one week = 113.12 dollars.

1. What does the atomic number of an element represent?
O A the number of neutrons
B the number of electrons
C the number of orbitals
D the number of protons

Answers

Answer:

D The number of protons

D would be the answer

Which acid could not be prepared by treating a Grignard reagent with CO2?
a. p-methylbenzoic acid.
b. cyclopentane carboxylic acid.
c. 4-oxopentanoic acid.
d. 3-methylbutanoic acid.

Answers

Answer:

4-oxopentanoic acid.

Explanation:

In this case, we must remember that the Grignard reaction is a reaction in which carbanions are produced. Carboanions have the ability to react with CO2 to generate a new C-C bond and a carboxylate ion. Finally, the acid medium will protonate the carboxylate to produce the carboxylic acid group.

The molecules that can follow the mechanism described above are the molecules: p-methylbenzoic acid, cyclopentane carboxylic acid and 3-methylbutanoic acid. (See figure 1)

In the case of 4-oxopentanoic acid, the possible carbanion will attack the carbonyl group to generate a cyclic structure and an alcohol group (1-methylcyclopropan-1-ol). Therefore, this molecule cannot be produced by this reaction. (See figure 2)

g Which ONE of the following ionic compounds is insoluble in water? A) MgCO3 B) Li2CO3 C) NH4Br D) K3PO4 E) Pb(NO3)2

Answers

Answer:

A) MgCO₃ is insoluble

Explanation:

Based on the rules of solubility:

All nitrates are soluble. That means Pb(NO₃)₂ is soluble.

All ammonium ions are soluble. NH₄Br is soluble.

All phosphate are insoluble except when combined with group I ions (Li, Na, K...) K₃PO₄ is soluble.

Also, all carbonates are insoluble except when combined with group I ions. That means Li₂CO₃ is soluble and:

A) MgCO₃ is insoluble

The specific spatial arrangement of amino acid residues that are close to each other in the polypeptide chain is called______the structure of a protein.
a. primary.
b. secondary.
c. tertiary.
d. quaternary .

Answers

Answer:

c. tertiary.

Explanation:

In this case, we can review the definition of each level of structuration in the proteins:

Primary structure

In the primary structure, the amino acids are linked by peptide bonds. That is, the order of the amino acids is the criterion that defines this type of structure.

Secondary structure

In the secondary structure, we have to look at the way in which the protein is folded. The options are:

  -) Beta-laminar: A structure in which the protein has a planar shape.

  -) Alpha-helix: A structure in which the protein has a cross-strand form.

Tertiary structure

In the tertiary structure, the R groups that the amino acids have in the primary structure can generate interactions with each other. Interactions such as hydrogen bridges, dipole-dipole, hydrophobic interactions. This makes the protein have a very specific three-dimensional structure, on which its function depends.

Quaternary structure

In the quaternary structure, several subunits may be attached, or there may be prostatic groups (metals that can help to attach various protein units).

With all these in mind, the deffinition that fits with the description in the question is the tertiary structure.

I hope it helps!

The specific spatial arrangement of amino acid residues that are close to each other in the polypeptide chain is called the tertiary structure of a protein.

What is Protein?

Protein structure is three dimensional in shape, where the atoms are arranged in amino acid chain. The chain is polypeptide containing many amino acid sequences.

The tertiary structure have a single polypeptide chain which is called the backbone.

Therefore, the specific spatial arrangement of amino acid residues that are close to each other in the polypeptide chain is called the tertiary structure of a protein.

Learn more on protein structure here,

https://brainly.com/question/17338734

9.
The main difference between the salt in the Dead
Sea and salt in the school lab is that
A salt in the Dead Sea is saltier.

B salt in the Dead Sea is iodized while that
of the lab is uniodized.

C salt in the Dead Sea is sodium chloride while
that of the lab has its hydrogen replaced.

D salt in the Dead Sea is sodium chloride
while salt in the lab is either soluble or
insoluble in water.

Answers

Answer:

salt in the Dead Sea is sodium chloride

while salt in the lab is either soluble or

insoluble in water.

Explanation:

The term 'salt' in the school laboratory does not always refer to sodium chloride. It is a generic term used for many substances especially those substances formed by neutralization reaction.

There are many salts that are used in the laboratory. Some of these salts are soluble in water while some are not soluble in water.

Salt in the dead sea always refers to sodium chloride, hence, salt in the dead sea is different from salt in the school laboratory.

Which of the following affects cell potential?

a. the standard cell potential value
b. the electronegativity of the elements in the electrodes
c. the volume of the solutions
d. all of the above

Answers

Answer:

the standard cell potential value

Explanation:

For every cell, we can calculate its standard electrode potential from the table of standard electrode potentials listed in many textbooks.

However, from Nernst's equation;

Ecell= E°cell - 0.0592/n log Q

Hence the standard cell potential (E°cell) affects the value of the calculated cell potential Ecell from Nernst's equation as stated above.

Choose the best answer below. If an equal number of moles of lactic acid, HC3H5O3, and potassium hydroxide, KOH, are added to water, is the resulting solution acidic, basic, or neutral? The Ka of lactic acid is 1.4 x10-5.

Answers

Answer:

Solution is basic.

Explanation:

When you add the same moles to a weak acid and strong base, you produce a neutralization reaction and a salt. For this case:

CH₃CHOHCOOH  +  KOH →  KCH₃CHOHCOO  +  H₂O

If we work in a titration, this is the equivalence point where:

moles of base = moles of acid

For this reaction we are only having lactates ions on solution. All the moles from the lactic acid and the hydroxide will be neutralized to make water. As both numbers are the same, the number is the moles of the formed lactate.

If we think the equilibrium equation for lactate, we have:

CH₃CHOHCOO⁻  +  H₂O  ⇄  CH₃CHOHCOOH  +  OH⁻

In conclussion, the solution is basic, because we give OH⁻ to medium.

Notice, that in a titratrion of a weak acid and a strong base, the pH at the equivalence point is always basic.

Other Questions
A force of 26.4lb is applied to an area of 1.71 in2. What is the pressure? A) 15.4 lb/in2 B) 0.0648 lb/in2 C) 45.1 lb/in2 D) 22.8 lb/in2 A scientist wants to find the percent of teens that like the taste of "brand X" lemonade over "brand Y" lemonade. She conducts a taste test of 500 teenagers. She gives each teen a bottle of lemonade with the labels showing the brand of each lemonade. She asks each teenager to taste each brand after drinking water in between. She finds that 50% of teens like brand X and 50% like brand Y lemonade. Why are the results of the survey most likely unreliable? Results from Gregor Mendel's dihybrid crosses supported gene linkage. a. True b. False You are playing basketball with your friends. The height (in feet) of the ball above the ground t seconds after a shot is released from your hand is modeled by the function f(t)= -16t^2 + 32t + 5.2. What is the value of t when the ball is released from your hand ? Regarding employment or association with attest clients, the employment of a former partner by a client in a key position most likely impairs firm independence if A. Team members have interactions with the former partner. B. The former partner cannot influence the accounting firms operations. C. Amounts are to be paid to the former partner based on a fixed formula. D. The former partner consults with the accounting firm. g Let the orbital radius of a planet be R and let the orbital period of the planet be T. What quantity is constant for all planets orbiting the sun, assuming circular orbits? If you wish to detect details of the size of atoms (about 1 1010 m) with electromagnetic radiation, it must have a wavelength of about this size.(a) What is its frequency? (b) What type of electromagnetic radiation might this be? Find the percent change from a stock that was worth $230 and is now $287 What is the image of the point (4,5) after a rotation of 90 counterclockwise aboutthe origin? Which of the following accurately describe Texass 1876 constitution? Check all answer choices that apply.Check All That Applya) It abolished slavery.b) It was adopted under Governor Richard Coke.It was adopted under Governor Richard Coke.c) It demonstrated a strong distrust of the institutions of government.It demonstrated a strong distrust of the institutions of government.d) It marked the beginning of U.S. military rule in Texas.It marked the beginning of U.S. military rule in Texas.e) It is still the outline for the fundamental law for the state of Texas. How do I find the slope to this equation ?2- = 12 Given m The current day periodic table is organized by Does anyone know this? Assume the following Python code has already executed. import os cwd = os.getcwd() Which answer is most likely output from the following Python statement? os.path.join(cwd, 'Documents/file.txt') Select one: a. ['Music', 'Pictures', 'Desktop', 'Library', 'Documents', 'Downloads'] b. False c. True d. /Users/me e. /Users/me/Documents/file.txt Science can lead to the development of: Its important to know that science is: What the answer to these. I really need help I have been stuck on it for 30 minutes A contract pledging title to assets as security for a node or bond is known as (an): A. Sinking fund. B. Mortgage. C. Equity. D. Lease. E. Indenture Why is 2 + (3) equal to 1 HELP Because it is 3 units to the left of 2 on a horizontal number line Because it is 3 units to the right of 0 on a horizontal number line Because it is 3 units to the left of 0 on a horizontal number line Because it is 3 units to the right of 2 on a horizontal number line Please please help I would give anything just please help and check if Im right its algebra 2 If your company uses a nonprice competition strategy, what should you focus on? A. Lowering prices B. Differentiation C. Creating direct competitors D. The public sector Please select the best answer from the choices provided A B C D